Air Helper Spring Over Load Kit Black Gauge & Tank Fits 1999-2004 Ford F250 F350

April 26, 2021 admin

Air Helper Spring Over Load Kit Black Gauge & Tank Fits 1999-2004 Ford F250 F350

Air Helper Spring Kit Bolt On Over Load Black Gauge & Tank 99-04 Ford F250 F350. Fits: 1999 – 2004 Ford F-250 & F-350 Trucks With 8 Lug Wheels Will Not Fit Cab & Chassis Models. Works On Trucks With B&W Tow Hitch. This is a bolt-on kit. Provides Up To 5000lbs Of Leveling Capacity. Airmaxxx Kit Includes: Two – Standard 2500lb Air Springs Mounting Brackets With Hardware One – AM400 Pewter Air Compressor One – 1/4″ Stainless Steel Braided Leader Hose One – 1/4″NPT Check Valve One – Premium 40 Amp Relay. One – 15′ Roll of 1/4 Air Hose. One – 1/4″ NPT Brass Air Valve With Fitting One – 200 PSI Black Face Air Gauge with Mounting Bracket One – 1/4″ NPT Female to 1/4″ NPT Female Connector for Steel Leader Hose Two – 1/4″ NPT Male to 1/4 Air Hose. Push Fittings Two – 3 Way 1/4 Air Hose Push Fittings One – 3 Gallon 6 Port Seamless Aluminum Air Tank. Never exceed more than truck manufacturers maximum load recommendations. The right to make changes in design or add to or improve on product without incurring any obligations to install the same on products previously manufactured is expressly reserved. All parts are aftermarket replacement parts. Unless specifically noted, no implication is made that these parts are the original car manufacturers’, are from the original suppliers, or are approved by them. Always utilize safety restrain systems while operating vehicle. Billet Adapters are intended to be used ONLY on a show vehicle, stylized for a special look and NOT intended to be used on long driving, freeway driving and every day driving. Under no circumstances will Phx Wheel Inc. Be liable to any party for any direct, indirect, special, incidental, consequential, or other damages based on any improper use.. It is up to the user and/or installer to determine fitness for any other application. Many of our products require fabrication skills to install and should only be installed by a qualified fabricator or mechanic. Product must be unused and in original boxes and packaging material. Or without a RA# will be refused. No claims will be accepted on parts that have been modified in any way. It is also the responsibility of the person installing any component or kit to determine the suitability of the components or kit for that particular application. Products are intended for off road and show use only. Always check with your local authorities for highway laws in your area because highway laws and the enforcement of those laws vary widely. The item “Air Helper Spring Over Load Kit Black Gauge & Tank Fits 1999-2004 Ford F250 F350″ is in sale since Wednesday, June 24, 2020. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Exterior\Towing & Hauling”. The seller is “wheelsnparts” and is located in Mesa, Arizona. This item can be shipped worldwide.

Modified Item: No
Superseded Part Number: TOW-FO9904-P142-36
Country/Region of Manufacture: United States
Custom Bundle: No
Interchange Part Number: air ride suspension parts level tow
Manufacturer Part Number: TOW-FO9904-P142-36ABR
Bundle Listing: Yes
Placement on Vehicle: Left
Other Part Number: 1999 – 2004 Ford Superduty Super Duty Tow
Brand: AirMaxxx
Fitment Type: Performance/Custom
Non-Domestic Product: No
Warranty: 1 Year

LA06S Ford Falcon Lowered XR6 XR8 AU BA BF FG Air Bag Load Assist Kit & In Cab

April 20, 2021 admin

LA06S Ford Falcon Lowered XR6 XR8 AU BA BF FG Air Bag Load Assist Kit & In Cab

LA06 Ford Falcon XG XH XF AU BA BF FG Air Bag Load Assist Kit & In Cab Kit. This is a brand new air bag load assist kit with digital In Car control to suit the rear of. Ford Falcon 1980 onwards. All Station Wagons with leaf rear. Note XR6 and XR8 are lower and dont offer us sufficient room between chassis and axle. We are working on a super low profile kit and will have a kit to suit these shortly. Once available we shall put a link to that kit here. Look back here soon for a link to the XR6 and XR8 kit. This package includes our Digital In Cab Compressor Kit – It’s a twin LED display and electric push button switches beside the gauge operate 4 electronic valves outside the car – 1 up and 1 down for each bag. This means no air lines inside the car and a reduced risk of springing an air leak with a lot less air fittings. The ability to inflate and deflate each bag even while driving is a huge advantage. It means you can get the pressures just how you like them depending upon your load or the driving conditions. Contractors who’s load changes weights as the day goes on can quickly adjust the bags as they go with the tickle of a button. The team at Air Assist Suspension are suspension specialists and have been looking after customers with air suspension needs since the 90’s. We are a family owned business based in Melbourne and pride our selves for excellent product knowledge, great service and support. We make all of our brackets here in Melbourne and use local businesses to supply and laser cut our steel. Our boxes are made here and even the powder in our powder coating is Australian. Load Assist air bags sit between the chassis and axle to assist with carrying loads. Just add more air until you reach the ride height you want no matter how heavy your load. And when you dont have a load just let the air out of the bags and you are back to havinging soft suspension and a comfort ride. If you get heavy springs you cant go back to soft when unloaded and most people find their heavy springs are still not heavy enough anyway. If you see yourself in this predicament then you really should consider air spings to assist your old suspension. Here are just a few examples.. Slide on campers – heavy when the camper is on but light when the camper is off. People towing vans and trailers need air springs when they are towing but their factory suspension is ideal when they are not. Some contractors cart fuel, water firewood and they get heavily loaded but light when empty. Tradies cart different tools and equipment to different jobs. With air spings a. Ll of these guys can change the load capacity of their suspension to suit their needs. Make towing safer by loading more weight to the front of the van or trailer and just pump up the bags a bit to handle the bit of extra weight on the draw bar. When fitting these bags you are not changing your old suspension nor increasing your GVM allowances. When carrying a load the typical pressure range is 25psi to 50psi. The good thing about air bags is just keep adding more air until you reach your desired ride height and comfort no matter the weight. You can’t hurt the bags because they can go to like 800 psi but here we are only talking the sorts of pressures you would run in your tyres. Speaking of tyres the air bag valves are just normal tyre valves. They are rated to still be effective with up to 2.5t over the back axle which in most cases is way more than you should be carrying and just goes to show the bags are up for what ever you throw at them. Some air bag kits like those that go inside coils can only offer 450 Kg which is nothing on these. You can not hurt these air bags. There is no maximum pressure because even industrial compressors can not reach the lofty heights of 800 to 1000 psi where these were made. Sticks, stones and sand will not hurt them. The rubber in these bags is heavier than the rubber in your tyres – we have people who live on cattle stations and have horrid corrugated gibber roads and they never have issues. There is no rubbing parts and they will not wear out. They can see out your car’s useful life no matter the age or distance. The Air Bags replace and become your new bump stop. Even if you have no air in them the bag compresses and the sidewalls are such that you still have a rubber bump stop. The end plates are still an inch apart on full compression so they do not strike each other. As such we dont need internal bump stops. It’s ok to run these flat. Note that because they are your bump stop it’s also good to have a few pound in the bags even when not carrying a load to cushion your bump stop and it makes for a more sporty ride too. Here’s where Air Assist Suspension lead the way and beat the other brands… Air Assist brackets are 100% made in Australia. Other brands make their brackets overseas and not only is that unaustralian but when they run out they can run out for months. It also means they cat customise brackets for customers. Air Assist has been approved and licensed to use the Made in Australia logo. Air Assist have a massive 4WD knowledge base and their kits do not fall short. Some other brands claim to suit 2 lift when they barely reach standard height. At Air assist, we offer height options and can even taylor make custom kits. Air Assist kits use heavier steel components. The end plates are 6mm steel rather than 5mm and we dont make do with C channel like others but instead use 3mm RHS where possible for added strength. And heavier steel means we crank up the welder and get deeper stronger welds. The manufacture and design of Air Assist kits has been guided by automotive engineers who not only specify materials and designs but specify where and how to weld so as not to compromise the integrity of the steel. The others clearly got that wrong as they weld across the arms instead of with them in their brackets. Others use imperial 1/4 air line and NPT threads whereas Air Assist use metric 6mm and BSP threads… Means parts are readilly replaceable anywhere if needed while on a big trip. Air Assist air fittings come pre-fitted to end plates with high pressure gas sealant. Air Assist kits come with an extra meter of air line over others. And its high flex, super strong and meets all the safety standards. Every bolt and washer in an Air Assit kit is stainless steel so wont rust. Air Assist kits can be run flat and still the end plates will not strike each other. You still have a cushioned bump stop and you dont chew the bags out from the inside. Air Assist Load Assist Kits include everything needed to fit and be operational. 2 Air Bags with alloy rings. Top and Bottom mounting plates using 6mm plate steel. 6 metres of 6mm poly air line. 1/4 BSP push to connect fittings in end plates to the 6mm air line. 2 x tyre valves for inflation and deflation – one per bag. Working diagram and instructions. These bags will not be harmed by over stretching them. They clamp to the end plates and the worst thing you could do is pull the bag away from the clamp so just undo them, reposition and do them up again. But we can make sure you get the right length brackets and bags so your shocks prevent over stretching. You can protect your investment with this kit – when you upgrade your vehicle in almost all cases you can keep your old bags and just get a new set of National brackets to suit the new rig. There is no drilling cutting or welding required. These kits just bolt in using your suspension mounts and either use the old bump stop mounts or clamp onto the chassis. Just a normal socket set is all you need by way of tools and anyone can do it in about an hour – you dont even need a hoist. Here are a few pics demonstrating the preparation and effort gone into the National brackets over other brands… National get the one piece laser cut and folded rather than tack a heap of separate parts together. And all sourced from local Australian businesses of course. Air Assist Suspension is an Australian family owned business based on Victoria’s Mornington Peninsula. We can help with air suspension needs on 4WD and 2WD utes, vans, SUVs, cars, trailers, campers, motor homes and commercial vehicles. Steve has been working with air suspension since the 90’s so technically speaking this is his 4th decade in the game. He has been the 4WD brains trust for other suspension companies and is well connected throughout the automotive industry. Since 2005 Steve has owned and operated the Cliffhanger 4WD Event which has become Australia’s best regarded 4WD week long event and he himself has raced in 12 Outback Challenge events. He co-owned Navrun 4WD Events, has been treasurer for the QLD Assoc 4WD Clubs and president of 2 different 4WD Clubs. He’s worked in drought relief fodder drives and has been helping farmers clean up and rebuild fences after bushfires. Steve grew up on the land so he understands livestock, crops and heavy equipment. He frequently visits the bush, loves talking with hobby farmers to station owners, mines and the engineering firms who support the mines, agricultural contractors, forestry workers, fishermen and just about everyone else. He and his wife Amanda like touring this great country towing a van and chatting with other travellers. He’s your 4WD Master and there is no better person to understand your needs. We send same or next day using Aus Post or Courier. You get a tracking ref and can make drop off requests like ATL (Authority to Leave). We can post to PO Boxes and the most remote regional areas. When you check out and pay there is an option for Express Post if you need it fast. If you need a hand with combining orders feel free to message us. Your card details remain safe. Only Pay Pal see your details. Everything we sell has exceptionally good warranties. Some brands offer longer terms than others – refer to item descriptions. Warranties cover only replacement parts for manufacture faults, air leaks in bags or air fittings etc. Wear and tear, rubbing on other suspension components and external factors like corrosion or being stabbed by obects off the road are not covered. So we avoid sending the wrong parts back we will run through a few simple tests for you to perform first. The AIR ASSIST Guarantee. We are based in Melbourne and all of our stock is here in Australia. So you will get your goods within a matter of days. For support or reassurance knowing someone here in Australia is experienced and understands what you need. This is a brand new air bag load assist kit with digital In Car control to suit the rear of : Ford Falcon 1980 onwards. All Station Wagons with leaf rear Note XR6 and XR8 are lower and dont offer us sufficient room between chassis and axle. Look back here soon for a link to the XR6 and XR8 kit This package includes our Digital In Cab Compressor Kit – It’s a twin LED display and electric push button switches beside the gauge operate 4 electronic valves outside the car – 1 up and 1 down for each bag. The item “LA06S Ford Falcon Lowered XR6 XR8 AU BA BF FG Air Bag Load Assist Kit & In Cab” is in sale since Tuesday, September 15, 2020. This item is in the category “Vehicle Parts & Accessories\Car & Truck Parts\Suspension, Steering\Other”. The seller is “air_assist_suspension” and is located in Somerville . This item can be shipped worldwide.

Manufacturer Part Number: LA06L LA06 BOSS Thor TK06
Brand: National Air Suspension
Type: Airbag Suspension Kit
Warranty: 5 Year

Air Helper Spring Over Load Kit withBlack Gauge & Tank Fits 2005-10 Ford F250 4×4

April 6, 2021 admin

Air Helper Spring Over Load Kit withBlack Gauge & Tank Fits 2005-10 Ford F250 4x4

AirMaxxx Air Helper Spring Kit With Bolt On Bag Brackets. 2005-10 Ford F250/F350 Super Duty 4×4 Trucks. With 8 Lug Wheels. Will Not Fit Cab & Chassis Models. Direct Bolt On Airbag Brackets Replaces Factory Bumpstops. Provides Up To 5000lbs Of Leveling Capacity. Two – Standard 2500lb Air Springs. One – Set Mounting Brackets With Hardware. One – AM400 Pewter Air Compressor One – 1/4″ Stainless Steel Braided Leader Hoses One – 1/4″NPT Check Valves One – Premium 40 Amp Relay. One – 15′ Roll of 1/4 Air Hose. One – 1/2″ NPT Brass Air Valve With Fittings One – 200 PSI Dual Needle Black Face Air Gauge with Mounting Bracket One – 1/4″ NPT Female to 1/4″ NPT Female Connector for Steel Leader Hose Two – 1/4″ NPT Male to 1/4 Air Hose. Push Fittings Two – 3 Way 1/4 Air Hose Push Fittings. One – 3 Gallon 6 Port Steel Air Tank. Never exceed more than truck manufacturers maximum load recommendations. The right to make changes in design or add to or improve on product without incurring any obligations to install the same on products previously manufactured is expressly reserved. All parts are aftermarket replacement parts. Unless specifically noted, no implication is made that these parts are the original car manufacturers’, are from the original suppliers, or are approved by them. Always utilize safety restrain systems while operating vehicle. Billet Adapters are intended to be used ONLY on a show vehicle, stylized for a special look and NOT intended to be used on long driving, freeway driving and every day driving. Under no circumstances will Phx Wheel Inc. Be liable to any party for any direct, indirect, special, incidental, consequential, or other damages based on any improper use.. It is up to the user and/or installer to determine fitness for any other application. Many of our products require fabrication skills to install and should only be installed by a qualified fabricator or mechanic. Product must be unused and in original boxes and packaging material. Or without a RA# will be refused. No claims will be accepted on parts that have been modified in any way. It is also the responsibility of the person installing any component or kit to determine the suitability of the components or kit for that particular application. Products are intended for off road and show use only. Always check with your local authorities for highway laws in your area because highway laws and the enforcement of those laws vary widely. The item “Air Helper Spring Over Load Kit withBlack Gauge & Tank Fits 2005-10 Ford F250 4×4″ is in sale since Friday, February 14, 2020. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Suspension & Steering\Lift Kits & Parts”. The seller is “wheelsnparts” and is located in Mesa, Arizona. This item can be shipped worldwide.

Country/Region of Manufacture: United States
Lift Height: 0.5″ – 3″ Adjustable Rear
Interchange Part Number: overload airbag towing f250 f350 4wd 4 wheel
Adjustable: Yes
Manufacturer Part Number: TOW-FO0510-MAN-4WD-36
Part Type: Suspension Lift Kit
Included Hardware: Bag Mounting Bracket Hardware
Bundle Listing: Yes
Kit or Single Part: Kit
Surface Finish: Black Powder Coat
Type: Kit
Placement on Vehicle: Left
Other Part Number: in cab air ride suspension parts bags brackets Tow
Brand: AirMaxxx
Fitment Type: Performance/Custom

LA06 Ford Falcon XG XH XF AU BA BF FG AirBag Suspension Load Assist Kit New

March 25, 2021 admin

LA06 Ford Falcon XG XH XF AU BA BF FG AirBag Suspension Load Assist Kit New

LA06 Ford Falcon XG XH XF AU BA BF FG AirBag Suspension Load Assist Kit. This is a brand new air bag load assist kit to suit the rear of :&#######xA0. Ford Falcon 1980 onwards -&#######xA0. All Utes &#######xA0. All Station Wagons with leaf rear. Note XR6 and XR8 are lower and dont offer us sufficient room between chassis and axle. We are working on a super low profile kit and will have a kit to suit these shortly. Once available we shall put a link to that kit here. Look back here soon for a link to the XR6 and XR8 kit. &#####x200B;&#####x200B;&#####x200B;&#####x200B;&#####x200B;&#####x200B;&#####x200B. The team at Air Assist Suspension are suspension&#######xA0;specialists and have been looking after customers with air suspension needs since the 90’s. We are a&#######xA0;family owned business based in Melbourne and pride our selves for excellent product knowledge, great service and support. We make all of our brackets here in Melbourne and use local businesses to supply and laser cut our steel. Our boxes are made here and even the powder in our powder coating is Australian. Load Assist air bags sit between the chassis and axle to assist with carrying loads. Just add more air until you reach the ride height you want no matter how heavy your load. And when you dont have a load just let the air out of the bags and you are back to havinging soft suspension and a comfort ride. If you get&#######xA0;heavy springs you cant go back to soft when unloaded and most people find their heavy springs are still not heavy enough anyway. If you see yourself in this predicament then you really should consider air spings to assist your old suspension. Here are&#######xA0;just a few examples.. Slide on campers – heavy when the camper is on but light when the camper is off. People towing vans and&#######xA0;trailers need air springs when they are towing but their factory suspension is ideal when they are not. Some contractors cart fuel, water firewood and they get heavily&#######xA0;loaded but light when empty. Tradies cart different tools and equipment to different jobs. &#####x200B;&#####x200B;&#####x200B;&#####x200B;&#####x200B;&#####x200B;&#####x200B;With air spings a. Ll of these guys&#######xA0;can change the load capacity of their suspension to suit their needs. &#####x200B;&#####x200B;&#####x200B;&#####x200B;&#####x200B;&#####x200B;&#####x200B;Make towing safer by loading more weight to the front of the van or trailer and just pump up the bags a bit to handle the bit of extra weight on the draw bar. When fitting these bags you are not changing&#######xA0;your old suspension nor&#######xA0;increasing your GVM allowances. When carrying a load the typical pressure range is 25psi to 50psi. The good thing about air bags is just keep adding more air until you reach your desired ride height and comfort no matter the weight. You can’t hurt the bags because they can go to like 800 psi but here we are only talking the sorts of pressures you would run in your tyres. Speaking of tyres the air bag valves are just normal tyre valves. &#####x200B;&#####x200B;&#####x200B;&#####x200B;&#####x200B;&#####x200B;&#####x200B;They are rated to still be effective with up to 2.5t over the back axle which in most cases is way more than you should be carrying and just goes to show the bags are up for what ever you throw at them. Some air bag kits like those that go inside coils&#######xA0;can only offer 450 Kg which is nothing on these. You can not hurt these air bags. There is no maximum pressure because even industrial compressors can not reach the lofty heights of 800 to 1000 psi where these were made. Sticks, stones and sand will not hurt them. The rubber in these bags is heavier than the rubber in your tyres – we have people who live on cattle stations and have horrid corrugated gibber roads and they never have issues. There is no rubbing parts and they will not wear out. They can see out your car’s useful life no matter the age or distance. &#######xA0;&#####x200B;&#####x200B;&#####x200B;&#####x200B;&#####x200B;&#####x200B;&#####x200B. The&#######xA0;Air Bags replace and become your new bump stop. Even if you have no air in them the bag compresses and the sidewalls are such that you still have a rubber bump stop. The end&#######xA0;plates are still an inch apart on full compression so they do not strike each other. As such we dont need internal bump stops. It’s ok to run these flat. Note that because they are your bump stop it’s also good to have a few pound in the bags even when not carrying a load to cushion your bump stop and it makes for a more sporty ride too. Here’s where Air Assist Suspension lead the way and beat the other brands… Air Assist brackets are 100% made in Australia. Other brands make their brackets overseas and not only is that unaustralian but when they run out they can run out for months. It also means they cat customise brackets for customers. Air Assist has been approved and&#######xA0;licensed to use the Made in Australia logo. Air Assist have a massive 4WD knowledge base and their kits do not fall short. Some other brands claim to suit 2 lift when they barely reach standard height. At Air assist, we offer height options and can even taylor make custom kits. Air Assist kits use heavier steel components. The end plates are 6mm steel rather than 5mm and we dont make do with C channel like others but instead use 3mm RHS where possible for added strength. And heavier steel means we crank up the welder and get deeper stronger welds. The manufacture and design of Air Assist&#######xA0;kits has been guided by automotive engineers who not only specify materials and designs but specify where and how to weld so as not to compromise the integrity of the steel. The others clearly got that wrong as they weld across the arms instead of with them in their brackets. Others use imperial 1/4 air line and NPT threads whereas Air Assist use metric 6mm and BSP threads… Means parts are readilly replaceable anywhere if needed while on a big trip. &#####x200B;&#####x200B;&#####x200B;&#####x200B;&#####x200B;&#####x200B;&#####x200B;Air Assist&#######xA0;air fittings come pre-fitted to end plates with high pressure gas sealant. Air Assist kits come with an extra meter of air line over others. And its high flex, super strong and meets all the safety standards. Every bolt&#######xA0;and washer in an Air Assit&#######xA0;kit is&#######xA0;stainless steel so wont rust. Air Assist kits can be run flat and still the end plates will not strike each other. You still have a cushioned bump stop and you dont chew the bags out from the inside. Air Assist Load Assist Kits include everything needed to fit and be operational. 2 Air Bags with alloy rings. Top and Bottom mounting plates using 6mm plate steel. 6 metres of 6mm poly air line. 1/4 BSP push to connect fittings in end plates to the 6mm air line. 2 x tyre valves for inflation and deflation – one per bag. Working diagram and instructions. These bags will not be&#######xA0;harmed by over stretching them. They clamp to the end plates and the worst thing you could do is pull the bag away from the clamp so just undo them, reposition and do them up again. But we can make sure you get the right length brackets and bags so your shocks prevent over stretching. You can protect your investment with this kit – when you upgrade your vehicle in almost all cases you can keep your old bags and just get a new set of National brackets to suit the new rig. There is no drilling cutting or welding required. These kits just bolt in using your suspension mounts and either use the old bump stop mounts or clamp onto the chassis. Just a normal socket set is all you need by way of tools and anyone can do it in about an hour – you dont even need a hoist. Here are a few pics demonstrating the preparation and effort gone into the National brackets over other brands… National get the one piece laser cut and folded rather than tack a heap of separate parts together. And all sourced from local Australian businesses of course. &#####x200B;&#####x200B;&#####x200B;&#####x200B;&#####x200B;&#####x200B;&#####x200B;&#####x200B;&#####x200B;&#####x200B;&#####x200B;&#####x200B;&#####x200B;&#####x200B. Air Assist Suspension is an Australian family owned business based on Victoria’s&#######xA0; Mornington Peninsula. We can help with air suspension needs on 4WD and 2WD utes, vans, SUVs, cars, trailers, campers, motor homes and commercial vehicles. Steve has been working with air suspension since the 90’s so technically speaking this is his 4th decade in the game. He has been the 4WD brains trust for other suspension companies and is well connected throughout the automotive industry. Since 2005 Steve has owned and operated the Cliffhanger 4WD Event which has become Australia’s best regarded 4WD week long event and he himself has raced in 12 Outback Challenge events. He co-owned Navrun 4WD Events, has been treasurer for the QLD Assoc 4WD Clubs and president of 2 different 4WD Clubs. He’s worked in drought relief fodder drives and has been helping farmers clean up and rebuild fences after bushfires. Steve grew up on the land so he understands livestock, crops and heavy equipment. He frequently visits the bush, loves talking with hobby farmers to station owners, mines and the engineering firms who support the mines, agricultural contractors, forestry workers, &#######xA0; fishermen and just about everyone else. &#######xA0;He and his wife Amanda like touring this great country towing a van and chatting with other travellers. He’s your 4WD Master and there is no better person to understand your needs. We send same or next day using Aus Post or Courier. You get a tracking ref and can make drop off requests like ATL (Authority to Leave). &#####x200B;&#####x200B;&#####x200B;&#####x200B;&#####x200B;&#####x200B;&#####x200B;We can post to PO Boxes and the most remote regional areas. When you check out and pay there is an option for Express Post if you need it fast. If you need a hand with combining orders feel free to message us. Your card details remain safe. Only&#######xA0;Pay Pal see your details. Everything we sell has exceptionally good warranties. Some brands offer longer terms than others – refer to item descriptions. Warranties cover only replacement parts for manufacture faults, air leaks in bags or air fittings etc. Wear&#######xA0;and tear, rubbing on other suspension components and external factors like corrosion or being stabbed by obects off the road are not covered. So we avoid sending the wrong parts back we will run through a few simple tests for you to perform first. The AIR ASSIST Guarantee. We are based in Melbourne and all of our stock is here in Australia. So you will get your goods within a matter of days. &#######xA0;for support or reassurance knowing someone here in Australia is experienced and understands what you need. This is a brand new air bag load assist kit to suit the rear of : Ford Falcon 1980 onwards. All Station Wagons with leaf rear Note XR6 and XR8 are lower and dont offer us sufficient room between chassis and axle. The item “LA06 Ford Falcon XG XH XF AU BA BF FG AirBag Suspension Load Assist Kit New” is in sale since Thursday, November 22, 2018. This item is in the category “Vehicle Parts & Accessories\Car & Truck Parts\Suspension, Steering\Other”. The seller is “air_assist_suspension” and is located in Somerville . This item can be shipped worldwide.

Manufacturer Part Number: National LA06 Falcon XG XH AU BA BF FG
Brand: National Air Suspension
Type: Airbag Suspension Kit
Warranty: 5 Year

B Air Helper Spring 2017-2018 Ford Super Duty Over Load Level F250 F350 F450

March 25, 2021 admin

B Air Helper Spring 2017-2018 Ford Super Duty Over Load Level F250 F350 F450

29 years at the same location. If we do not have it, we can build it. 1″ SPACERS LIFT 2″. 1.5″ SPACERS LIFT 3″. The item “B Air Helper Spring 2017-2018 Ford Super Duty Over Load Level F250 F350 F450″ is in sale since Wednesday, August 23, 2017. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Suspension & Steering\Lift Kits & Parts”. The seller is “chassis_tech” and is located in Mesa, Arizona. This item can be shipped to United States, Canada.

Brand: CHASSIS TECH
MPN: 263163678706
Manufacturer Part Number: 263163678706
Manufacturer: Chassis Tech
UPC: Does not apply
Country/Region of Manufacture: United States
Type: Kit
Warranty: Lifetime
Part Brand: Chassis Tech
Other Part Number: truck air ride suspension parts bags brackets Tow
Interchange Part Number: overload airbag towing f250 f350 4wd 4 wheel
Placement on Vehicle: Left
Surface Finish: Black Powder Coat
Kit or Single Part: Kit
Adjustable: Yes

AIRBAG TOW LOAD ASSIST KIT Ford F150 2015-2019 2wd & 4wd with Air Management

March 22, 2021 admin

AIRBAG TOW LOAD ASSIST KIT Ford F150 2015-2019 2wd & 4wd with Air Management

Complete with Air Management. Comes with Gauge and 3-Position Paddle Switch. Up turns on compressor to fill bags, release goes back to Neutral. Hold Switch down and Air Releases utilizing. A mini valve switch on back of air gauge. The item “AIRBAG TOW LOAD ASSIST KIT Ford F150 2015-2019 2wd & 4wd with Air Management” is in sale since Monday, January 25, 2021. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Suspension & Steering\Lift Kits & Parts”. The seller is “chassis_tech” and is located in Mesa, Arizona. This item can be shipped worldwide.

Modified Item: No
Country/Region of Manufacture: United States
Custom Bundle: No
Lift Height: 0.5″ – 3″ Adjustable Rear
Interchange Part Number: air ride suspension parts assist
Adjustable: Yes
Manufacturer Part Number: 263797917323
Included Hardware: Air Bag
MPN: 263797917323
Manufacturer: Chassis Tech
UPC: Does not apply
Type: Kit
Part Brand: Chassis Tech
Position: Rear
Bundle Listing: Yes
Placement on Vehicle: Left
Other Part Number: heavy duty load lifting brackets & bags
Brand: CHASSIS TECH
Fitment Type: Performance/Custom
Non-Domestic Product: No
Warranty: Lifetime

Boss Load Assist Air Bag Suspension Kit for Sprinter Van 2500 with 3 inch Axle

March 6, 2021 admin

Boss Load Assist Air Bag Suspension Kit for Sprinter Van 2500 with 3 inch Axle

BOSS Air Bag Suspension Load Assist Kit – Great for towing & hauling heavy loads Fits: 2008 to 2019 Mercedes Sprinter Cargo Van 2500 – Models with 3 Rear Axle ONLY – VERIFY AXLE TUBE DIAMETER BEFORE ORDERING! The Load Assist Kit comes with. 2 x BOSS Extreme Series Double Bellow Airbags. 4 x brackets (2 upper & 2 lower). Quality SAE J844 Government Approved Airline. Dual Schrader Valves Mounted in Stainless Panel. Instructions for fitting – NO Drilling required! NOTE : The mounting brackets are now powder coated in Black. We also offer this kit with the In-cab control/compressor kit. Please message us for details. We are the oldest BOSS Suspension distributor in North America! Experience counts when it comes to your suspension! Boss Extreme series airbags are rated at 2500lb each and have been tested to over 750psi. Average dual cab ute will run around 15-45psi depending on load. To get the best performance from your kit inflate airbags just enough to achieve a level ride height. By doing this you are also allowing all of the suspension components to share the extra load of the vehicle and not putting any unnecessary pressure on any one individual part of your vehicles suspension. The item “Boss Load Assist Air Bag Suspension Kit for Sprinter Van 2500 with 3 inch Axle” is in sale since Thursday, May 21, 2020. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Suspension & Steering\Shocks & Struts”. The seller is “d-spec1″ and is located in Raymore, Missouri. This item can be shipped to United States, Canada.

Interchange Part Number: Tow Assist, Air Helper Spring
Adjustable: Yes
Manufacturer Part Number: LA85
Part Type: Air Suspension Helper Spring Kit
Included Hardware: Air Line
Placement on Vehicle: Left
Brand: BOSS Air Suspension
Fitment Type: Performance/Custom
Warranty: 5 Year

Toyota Tundra 2008 to 2016 BOSS Air Bag Suspension Load Assist Kit LA39

March 5, 2021 admin

Toyota Tundra 2008 to 2016 BOSS Air Bag Suspension Load Assist Kit LA39

This is a brand new BOSS air bag load assist kit to suit the rear of. Toyota Tundra all models from 2008 onwards. 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016 +. Suits normal suspension height up to 2 lifted. I have also listed a triple bag version for the 3 lifted and taller vehicles. Rated at 1.2t per bag = 2.6t. If you carry heavy loads at all you should consider heavier springs of some sort. But the problem with heavier springs is that when you don’t have a load they are rock hard and not only does it feel terrible but the car handles poorly. If your load varies you need soft suspension when you don’t carry a load and heavy suspension when you do have a load. Cant manage that with heavier leaf springs. The only real way to achieve this is with air bags just like those in trucks and buses. This kit suits Std to 2 Lift Kit. Bolt on – no welding. With a BOSS Air Bag Load Assist kit you can run them deflated when you are running light weight without a load. Then just pump them up when you load up. The heavier the load the more air you can apply. These will safely load up to 150 psi and carry 1.5t per bag = 3t. What lots of customers do is take a leaf or 2 out of their rear leaf pack. This softens up the ride to softer than standard. Then run a few pounds to suit your liking in the bags. Now you are running on air, even without a load. It’s OK to run air in the bags all of the time. And they can be run flat although ideally they need a few pounds for self preservation. The kit is complete. Brackets top and bottom. Air Bags x 2 (1 for each side). Air Fittings for air lines. Easy to follow instructions with pics. Essentially you can lift the rear of the vehicle with air bags to level when otherwise sagging in the rear. You can avoid your headlights blinding oncoming drivers when your rear end sags. Shocks, tyres and leaf springs will last longer too. These compliment what you already have. We are not replacing anything, just adding to the car. The steel brackets are very heavy duty. You dont always get what you pay for. One of the more expensive brands is known for its brackets falling over to one side and breaking off the air fitting. That tends to happen in the middle of a big trip and makes for a very frustrating experience. We saw this as an opportunity to bring a heavier duty kit to market and if we matched their prices we would only be ripping you off. Why pay for a brand name? The steel brackets are laser cut, mig welded and anodised for rust prevention. The air bags are tried and trested 5mm thick rubber double convoluted multi-ply. BOSS kits have been around for over 10 years and in that time literally thousands have been fitted. We sell to mining and heavy commercial operators, agricultural contractors and farmers, tradies, fishermen, campers, tourers and people who tow vans, trailers and floats. Here’s how easy they are to fit – anyone can do this.. Bolt up air bag to top and bottom mounts. Jack up and support weight of car’s chassis (You can leave wheels on the ground). Remove Bump Stop from Chassis and bolt top mount to Bump Stop Bracket. Loosen “U” bolts clamping rear leaf pack to rear axle. Slide bottom mount under “U” bolt then tighten “U” Bolts. Attach air fitting to bag plate and run air lines to somewhere handy. That’s all there is to it. Any old air compressor will pump these up. Could be at a gas station, a workshop compressor or a 12V cig lighter compressor. It’s really cool to mount a compressor and air tank on board as well as an inflation kit so you can adjust your air bags with the flick of a switch. See our store for more options. We are the specialist air suspension supplier to the automotive industry. For almost 15 years we have been delivering suspension solutions to businesses who carry loads, to the Offroad enthusiasts, low riding dumpers, mining and commercial contractors, fishermen and farmers and everyone else in between. We just do BOSS stuff so we aren’t distracted and we stay focussed on delivering quality air and suspension solutions at great prices. The item “Toyota Tundra 2008 to 2016 BOSS Air Bag Suspension Load Assist Kit LA39″ is in sale since Tuesday, October 1, 2013. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Suspension & Steering\Shocks & Struts”. The seller is “bossusacanada” and is located in Cultus Lake, British Columbia. This item can be shipped worldwide.

Brand: BOSS
Warranty: 5 Year
Manufacturer Part Number: BOSS LA39 Toyota Tundra 2008 to 2016
Country/Region of Manufacture: United States

LA01 Holden Rodeo Ute to 6/2012 RA LX LTZ LT 4×4 4WD 4×2 Air Bag Load Kit

March 3, 2021 admin

LA01 Holden Rodeo Ute to 6/2012 RA LX LTZ LT 4x4 4WD 4x2 Air Bag Load Kit

LA09 Holden Rodeo Ute up to June 2012 – Air Bag Load Assist Kit. This is a brand new air bag load assist kit to suit the rear of :&#######xA0. Holden Rodeo – all models up to June 2012 4WD and 2WD. Holden&#######xA0;Colorado – all models up to June 2012 4WD and 2WD. In June 2012 there was a model and shape change – this is the older shape if you are in 2012. &#####x200B;&#####x200B;&#####x200B;&#####x200B;&#####x200B;&#####x200B;&#####x200B. The team at Air Assist Suspension are suspension&#######xA0;specialists and have been looking after customers with air suspension needs since the 90’s. We are a&#######xA0;family owned business based in Melbourne and pride our selves for excellent product knowledge, great service and support. We make all of our brackets here in Melbourne and use local businesses to supply and laser cut our steel. Our boxes are made here and even the powder in our powder coating is Australian. Load Assist air bags sit between the chassis and axle to assist with carrying loads. Just add more air until you reach the ride height you want no matter how heavy your load. And when you dont have a load just let the air out of the bags and you are back to havinging soft suspension and a comfort ride. If you get&#######xA0;heavy springs you cant go back to soft when unloaded and most people find their heavy springs are still not heavy enough anyway. If you see yourself in this predicament then you really should consider air spings to assist your old suspension. Here are&#######xA0;just a few examples.. Slide on campers – heavy when the camper is on but light when the camper is off. People towing vans and&#######xA0;trailers need air springs when they are towing but their factory suspension is ideal when they are not. Some contractors cart fuel, water firewood and they get heavily&#######xA0;loaded but light when empty. Tradies cart different tools and equipment to different jobs. &#####x200B;&#####x200B;&#####x200B;&#####x200B;&#####x200B;&#####x200B;&#####x200B;With air spings a. Ll of these guys&#######xA0;can change the load capacity of their suspension to suit their needs. &#####x200B;&#####x200B;&#####x200B;&#####x200B;&#####x200B;&#####x200B;&#####x200B;Make towing safer by loading more weight to the front of the van or trailer and just pump up the bags a bit to handle the bit of extra weight on the draw bar. When fitting these bags you are not changing&#######xA0;your old suspension nor&#######xA0;increasing your GVM allowances. When carrying a load the typical pressure range is 25psi to 50psi. The good thing about air bags is just keep adding more air until you reach your desired ride height and comfort no matter the weight. You can’t hurt the bags because they can go to like 800 psi but here we are only talking the sorts of pressures you would run in your tyres. Speaking of tyres the air bag valves are just normal tyre valves. &#####x200B;&#####x200B;&#####x200B;&#####x200B;&#####x200B;&#####x200B;&#####x200B;They are rated to still be effective with up to 2.5t over the back axle which in most cases is way more than you should be carrying and just goes to show the bags are up for what ever you throw at them. Some air bag kits like those that go inside coils&#######xA0;can only offer 450 Kg which is nothing on these. You can not hurt these air bags. There is no maximum pressure because even industrial compressors can not reach the lofty heights of 800 to 1000 psi where these were made. Sticks, stones and sand will not hurt them. The rubber in these bags is heavier than the rubber in your tyres – we have people who live on cattle stations and have horrid corrugated gibber roads and they never have issues. There is no rubbing parts and they will not wear out. They can see out your car’s useful life no matter the age or distance. &#######xA0;&#####x200B;&#####x200B;&#####x200B;&#####x200B;&#####x200B;&#####x200B;&#####x200B. The&#######xA0;Air Bags replace and become your new bump stop. Even if you have no air in them the bag compresses and the sidewalls are such that you still have a rubber bump stop. The end&#######xA0;plates are still an inch apart on full compression so they do not strike each other. As such we dont need internal bump stops. It’s ok to run these flat. Note that because they are your bump stop it’s also good to have a few pound in the bags even when not carrying a load to cushion your bump stop and it makes for a more sporty ride too. Here’s where Air Assist Suspension lead the way and beat the other brands… Air Assist brackets are 100% made in Australia. Other brands make their brackets overseas and not only is that unaustralian but when they run out they can run out for months. It also means they cat customise brackets for customers. Air Assist has been approved and&#######xA0;licensed to use the Made in Australia logo. Air Assist have a massive 4WD knowledge base and their kits do not fall short. Some other brands claim to suit 2 lift when they barely reach standard height. At Air assist, we offer height options and can even taylor make custom kits. Air Assist kits use heavier steel components. The end plates are 6mm steel rather than 5mm and we dont make do with C channel like others but instead use 3mm RHS where possible for added strength. And heavier steel means we crank up the welder and get deeper stronger welds. The manufacture and design of Air Assist&#######xA0;kits has been guided by automotive engineers who not only specify materials and designs but specify where and how to weld so as not to compromise the integrity of the steel. The others clearly got that wrong as they weld across the arms instead of with them in their brackets. Others use imperial 1/4 air line and NPT threads whereas Air Assist use metric 6mm and BSP threads… Means parts are readilly replaceable anywhere if needed while on a big trip. &#####x200B;&#####x200B;&#####x200B;&#####x200B;&#####x200B;&#####x200B;&#####x200B;Air Assist&#######xA0;air fittings come pre-fitted to end plates with high pressure gas sealant. Air Assist kits come with an extra meter of air line over others. And its high flex, super strong and meets all the safety standards. Every bolt&#######xA0;and washer in an Air Assit&#######xA0;kit is&#######xA0;stainless steel so wont rust. Air Assist kits can be run flat and still the end plates will not strike each other. You still have a cushioned bump stop and you dont chew the bags out from the inside. Air Assist Load Assist Kits include everything needed to fit and be operational. 2 Air Bags with alloy rings. Top and Bottom mounting plates using 6mm plate steel. 6 metres of 6mm poly air line. 1/4 BSP push to connect fittings in end plates to the 6mm air line. 2 x tyre valves for inflation and deflation – one per bag. Working diagram and instructions. These bags will not be&#######xA0;harmed by over stretching them. They clamp to the end plates and the worst thing you could do is pull the bag away from the clamp so just undo them, reposition and do them up again. But we can make sure you get the right length brackets and bags so your shocks prevent over stretching. You can protect your investment with this kit – when you upgrade your vehicle in almost all cases you can keep your old bags and just get a new set of National brackets to suit the new rig. There is no drilling cutting or welding required. These kits just bolt in using your suspension mounts and either use the old bump stop mounts or clamp onto the chassis. Just a normal socket set is all you need by way of tools and anyone can do it in about an hour – you dont even need a hoist. Here are a few pics demonstrating the preparation and effort gone into the National brackets over other brands… National get the one piece laser cut and folded rather than tack a heap of separate parts together. And all sourced from local Australian businesses of course. &#####x200B;&#####x200B;&#####x200B;&#####x200B;&#####x200B;&#####x200B;&#####x200B;&#####x200B;&#####x200B;&#####x200B;&#####x200B;&#####x200B;&#####x200B;&#####x200B. Air Assist Suspension is an Australian family owned business based on Victoria’s&#######xA0; Mornington Peninsula. We can help with air suspension needs on 4WD and 2WD utes, vans, SUVs, cars, trailers, campers, motor homes and commercial vehicles. Steve has been working with air suspension since the 90’s so technically speaking this is his 4th decade in the game. He has been the 4WD brains trust for other suspension companies and is well connected throughout the automotive industry. Since 2005 Steve has owned and operated the Cliffhanger 4WD Event which has become Australia’s best regarded 4WD week long event and he himself has raced in 12 Outback Challenge events. He co-owned Navrun 4WD Events, has been treasurer for the QLD Assoc 4WD Clubs and president of 2 different 4WD Clubs. He’s worked in drought relief fodder drives and has been helping farmers clean up and rebuild fences after bushfires. Steve grew up on the land so he understands livestock, crops and heavy equipment. He frequently visits the bush, loves talking with hobby farmers to station owners, mines and the engineering firms who support the mines, agricultural contractors, forestry workers, &#######xA0; fishermen and just about everyone else. &#######xA0;He and his wife Amanda like touring this great country towing a van and chatting with other travellers. He’s your 4WD Master and there is no better person to understand your needs. We send same or next day using Aus Post or Courier. You get a tracking ref and can make drop off requests like ATL (Authority to Leave). &#####x200B;&#####x200B;&#####x200B;&#####x200B;&#####x200B;&#####x200B;&#####x200B;We can post to PO Boxes and the most remote regional areas. When you check out and pay there is an option for Express Post if you need it fast. If you need a hand with combining orders feel free to message us. Your card details remain safe. Only&#######xA0;Pay Pal see your details. Everything we sell has exceptionally good warranties. Some brands offer longer terms than others – refer to item descriptions. Warranties cover only replacement parts for manufacture faults, air leaks in bags or air fittings etc. Wear&#######xA0;and tear, rubbing on other suspension components and external factors like corrosion or being stabbed by obects off the road are not covered. So we avoid sending the wrong parts back we will run through a few simple tests for you to perform first. The AIR ASSIST Guarantee. We are based in Melbourne and all of our stock is here in Australia. So you will get your goods within a matter of days. &#######xA0;for support or reassurance knowing someone here in Australia is experienced and understands what you need. This is a brand new air bag load assist kit to suit the rear of. Holden Colorado – all models up to June 2012 4WD and 2WD In June 2012 there was a model and shape change – this is the older shape if you are in 2012. The item “LA01 Holden Rodeo Ute to 6/2012 RA LX LTZ LT 4×4 4WD 4×2 Air Bag Load Kit” is in sale since Thursday, August 22, 2013. This item is in the category “Vehicle Parts & Accessories\Car & Truck Parts\Suspension, Steering\Other”. The seller is “air_assist_suspension” and is located in Somerville . This item can be shipped worldwide.

Manufacturer Part Number: LA09 Rodeo pre 2012
Brand: National Air Suspension

LA01 Holden 1 Tonner Ute Commodore Crewman VZ Cross 8 Air Bag Load Kit

March 3, 2021 admin

LA01 Holden 1 Tonner Ute Commodore Crewman VZ Cross 8 Air Bag Load Kit

LA09 Holden 1 Tonner Ute Commodore Crewman VZ Cross 8 Air Bag Load Kit. This is a brand new air bag load assist kit to suit the rear of Holden Ute – all models with leaf springs in the back. All 1 tonner no matter how old, all crewman and all leaf rear commodores. &#####x200B;&#####x200B;&#####x200B;&#####x200B;&#####x200B;&#####x200B;&#####x200B. The team at Air Assist Suspension are suspension&#######xA0;specialists and have been looking after customers with air suspension needs since the 90’s. We are a&#######xA0;family owned business based in Melbourne and pride our selves for excellent product knowledge, great service and support. We make all of our brackets here in Melbourne and use local businesses to supply and laser cut our steel. Our boxes are made here and even the powder in our powder coating is Australian. Load Assist air bags sit between the chassis and axle to assist with carrying loads. Just add more air until you reach the ride height you want no matter how heavy your load. And when you dont have a load just let the air out of the bags and you are back to havinging soft suspension and a comfort ride. If you get&#######xA0;heavy springs you cant go back to soft when unloaded and most people find their heavy springs are still not heavy enough anyway. If you see yourself in this predicament then you really should consider air spings to assist your old suspension. Here are&#######xA0;just a few examples.. Slide on campers – heavy when the camper is on but light when the camper is off. People towing vans and&#######xA0;trailers need air springs when they are towing but their factory suspension is ideal when they are not. Some contractors cart fuel, water firewood and they get heavily&#######xA0;loaded but light when empty. Tradies cart different tools and equipment to different jobs. &#####x200B;&#####x200B;&#####x200B;&#####x200B;&#####x200B;&#####x200B;&#####x200B;With air spings a. Ll of these guys&#######xA0;can change the load capacity of their suspension to suit their needs. &#####x200B;&#####x200B;&#####x200B;&#####x200B;&#####x200B;&#####x200B;&#####x200B;Make towing safer by loading more weight to the front of the van or trailer and just pump up the bags a bit to handle the bit of extra weight on the draw bar. When fitting these bags you are not changing&#######xA0;your old suspension nor&#######xA0;increasing your GVM allowances. When carrying a load the typical pressure range is 25psi to 50psi. The good thing about air bags is just keep adding more air until you reach your desired ride height and comfort no matter the weight. You can’t hurt the bags because they can go to like 800 psi but here we are only talking the sorts of pressures you would run in your tyres. Speaking of tyres the air bag valves are just normal tyre valves. &#####x200B;&#####x200B;&#####x200B;&#####x200B;&#####x200B;&#####x200B;&#####x200B;They are rated to still be effective with up to 2.5t over the back axle which in most cases is way more than you should be carrying and just goes to show the bags are up for what ever you throw at them. Some air bag kits like those that go inside coils&#######xA0;can only offer 450 Kg which is nothing on these. You can not hurt these air bags. There is no maximum pressure because even industrial compressors can not reach the lofty heights of 800 to 1000 psi where these were made. Sticks, stones and sand will not hurt them. The rubber in these bags is heavier than the rubber in your tyres – we have people who live on cattle stations and have horrid corrugated gibber roads and they never have issues. There is no rubbing parts and they will not wear out. They can see out your car’s useful life no matter the age or distance. &#######xA0;&#####x200B;&#####x200B;&#####x200B;&#####x200B;&#####x200B;&#####x200B;&#####x200B. The&#######xA0;Air Bags replace and become your new bump stop. Even if you have no air in them the bag compresses and the sidewalls are such that you still have a rubber bump stop. The end&#######xA0;plates are still an inch apart on full compression so they do not strike each other. As such we dont need internal bump stops. It’s ok to run these flat. Note that because they are your bump stop it’s also good to have a few pound in the bags even when not carrying a load to cushion your bump stop and it makes for a more sporty ride too. Here’s where Air Assist Suspension lead the way and beat the other brands… Air Assist brackets are 100% made in Australia. Other brands make their brackets overseas and not only is that unaustralian but when they run out they can run out for months. It also means they cat customise brackets for customers. Air Assist has been approved and&#######xA0;licensed to use the Made in Australia logo. Air Assist have a massive 4WD knowledge base and their kits do not fall short. Some other brands claim to suit 2 lift when they barely reach standard height. At Air assist, we offer height options and can even taylor make custom kits. Air Assist kits use heavier steel components. The end plates are 6mm steel rather than 5mm and we dont make do with C channel like others but instead use 3mm RHS where possible for added strength. And heavier steel means we crank up the welder and get deeper stronger welds. The manufacture and design of Air Assist&#######xA0;kits has been guided by automotive engineers who not only specify materials and designs but specify where and how to weld so as not to compromise the integrity of the steel. The others clearly got that wrong as they weld across the arms instead of with them in their brackets. Others use imperial 1/4 air line and NPT threads whereas Air Assist use metric 6mm and BSP threads… Means parts are readilly replaceable anywhere if needed while on a big trip. &#####x200B;&#####x200B;&#####x200B;&#####x200B;&#####x200B;&#####x200B;&#####x200B;Air Assist&#######xA0;air fittings come pre-fitted to end plates with high pressure gas sealant. Air Assist kits come with an extra meter of air line over others. And its high flex, super strong and meets all the safety standards. Every bolt&#######xA0;and washer in an Air Assit&#######xA0;kit is&#######xA0;stainless steel so wont rust. Air Assist kits can be run flat and still the end plates will not strike each other. You still have a cushioned bump stop and you dont chew the bags out from the inside. Air Assist Load Assist Kits include everything needed to fit and be operational. 2 Air Bags with alloy rings. Top and Bottom mounting plates using 6mm plate steel. 6 metres of 6mm poly air line. 1/4 BSP push to connect fittings in end plates to the 6mm air line. 2 x tyre valves for inflation and deflation – one per bag. Working diagram and instructions. These bags will not be&#######xA0;harmed by over stretching them. They clamp to the end plates and the worst thing you could do is pull the bag away from the clamp so just undo them, reposition and do them up again. But we can make sure you get the right length brackets and bags so your shocks prevent over stretching. You can protect your investment with this kit – when you upgrade your vehicle in almost all cases you can keep your old bags and just get a new set of National brackets to suit the new rig. There is no drilling cutting or welding required. These kits just bolt in using your suspension mounts and either use the old bump stop mounts or clamp onto the chassis. Just a normal socket set is all you need by way of tools and anyone can do it in about an hour – you dont even need a hoist. Here are a few pics demonstrating the preparation and effort gone into the National brackets over other brands… National get the one piece laser cut and folded rather than tack a heap of separate parts together. And all sourced from local Australian businesses of course. &#####x200B;&#####x200B;&#####x200B;&#####x200B;&#####x200B;&#####x200B;&#####x200B;&#####x200B;&#####x200B;&#####x200B;&#####x200B;&#####x200B;&#####x200B;&#####x200B. Air Assist Suspension is an Australian family owned business based on Victoria’s&#######xA0; Mornington Peninsula. We can help with air suspension needs on 4WD and 2WD utes, vans, SUVs, cars, trailers, campers, motor homes and commercial vehicles. Steve has been working with air suspension since the 90’s so technically speaking this is his 4th decade in the game. He has been the 4WD brains trust for other suspension companies and is well connected throughout the automotive industry. Since 2005 Steve has owned and operated the Cliffhanger 4WD Event which has become Australia’s best regarded 4WD week long event and he himself has raced in 12 Outback Challenge events. He co-owned Navrun 4WD Events, has been treasurer for the QLD Assoc 4WD Clubs and president of 2 different 4WD Clubs. He’s worked in drought relief fodder drives and has been helping farmers clean up and rebuild fences after bushfires. Steve grew up on the land so he understands livestock, crops and heavy equipment. He frequently visits the bush, loves talking with hobby farmers to station owners, mines and the engineering firms who support the mines, agricultural contractors, forestry workers, &#######xA0; fishermen and just about everyone else. &#######xA0;He and his wife Amanda like touring this great country towing a van and chatting with other travellers. He’s your 4WD Master and there is no better person to understand your needs. We send same or next day using Aus Post or Courier. You get a tracking ref and can make drop off requests like ATL (Authority to Leave). &#####x200B;&#####x200B;&#####x200B;&#####x200B;&#####x200B;&#####x200B;&#####x200B;We can post to PO Boxes and the most remote regional areas. When you check out and pay there is an option for Express Post if you need it fast. If you need a hand with combining orders feel free to message us. Your card details remain safe. Only&#######xA0;Pay Pal see your details. Everything we sell has exceptionally good warranties. Some brands offer longer terms than others – refer to item descriptions. Warranties cover only replacement parts for manufacture faults, air leaks in bags or air fittings etc. Wear&#######xA0;and tear, rubbing on other suspension components and external factors like corrosion or being stabbed by obects off the road are not covered. So we avoid sending the wrong parts back we will run through a few simple tests for you to perform first. The AIR ASSIST Guarantee. We are based in Melbourne and all of our stock is here in Australia. So you will get your goods within a matter of days. &#######xA0;for support or reassurance knowing someone here in Australia is experienced and understands what you need. The item “LA01 Holden 1 Tonner Ute Commodore Crewman VZ Cross 8 Air Bag Load Kit” is in sale since Thursday, August 22, 2013. This item is in the category “Vehicle Parts & Accessories\Car & Truck Parts\Suspension, Steering\Other”. The seller is “air_assist_suspension” and is located in Somerville . This item can be shipped worldwide.

Manufacturer Part Number: LA09 Holden 1Ton
Brand: National Air Suspension

January 2025
M	T	W	T	F	S	S
« Dec
		1	2	3	4	5
6	7	8	9	10	11	12
13	14	15	16	17	18	19
20	21	22	23	24	25	26
27	28	29	30	31