Viair 444c Dual Pack Stealth Black Air Ride Suspension Compressor On Board Air

Viair 444c Dual Pack Stealth Black Air Ride Suspension Compressor On Board Air
Viair 444c Dual Pack Stealth Black Air Ride Suspension Compressor On Board Air
Viair 444c Dual Pack Stealth Black Air Ride Suspension Compressor On Board Air
Viair 444c Dual Pack Stealth Black Air Ride Suspension Compressor On Board Air

Viair 444c Dual Pack Stealth Black Air Ride Suspension Compressor On Board Air
Take your ride to the next level with this VIAIR 444C Dual Pack STEALTH BLACK Air Ride Bag Suspension Compressor On Board Air system. The included hardware, air bag, and chrome surface finish make for an eye-catching addition to your vehicle. (2) 444C (Chrome or Stealth Black) Air Compressors w/Thermal Overload Protectors. Intercooler Head (Patents Pending). (2) Air Filter Assemblies. (2) Remote Mount Brackets. (2) Sets of Remote Mount Fittings. (2) Sets of Spare Air Filter Elements. (8) Sets of Nuts, Bolts, Washers and Lock Washers. (2) Stainless Steel Braided Leader Hoses with Inline Check Valve. (6) Airline Clips with Included Hardware. Permanent Magnetic Motor. Working Pressure: 200 PSI. Air Tank Size: 10.0 Gallon. Max Ambient Temp: +158°F. Min Ambient Temp: -40°F. Dimensions: 10.87? L x 4.2? W x 7.06? H (Each Unit). Net Weight: 21.60 lbs. Use thread sealant for proper installation. Thread tape is not recommended. Properly sealed, recommended torque for 1/8 is 10 11 ft. Recommended torque for 1/4″ and 3/8″ is 16 18 ft. Supply Voltage: 13.8 Volts. 2.5 GALLON TANK. 0 to 200 PSI. 165 to 200 PSI. 5.0 GALLON TANK.
Viair 444c Dual Pack Stealth Black Air Ride Suspension Compressor On Board Air

VIAIR 444C DUAL Pack Chrome Compressors Air Bag Air Ride Suspension 44432

VIAIR 444C DUAL Pack Chrome Compressors Air Bag Air Ride Suspension 44432

VIAIR 444C DUAL Pack Chrome Compressors Air Bag Air Ride Suspension 44432
Awesome Service – See Our Ratings. 444C DUAL Pack Chrome Compressors Air Bag Air Ride Suspension. All 444C compressors feature a head assembly that includes a newly-developed, patents pending intercooler head. Additionally, they are equipped with a stainless steel braided leader hose with inline check valve assembly that serves to protect the compressor by eliminating the possibility of high amperage restarts. (2) 444C Chrome Compressors. Intercooler Head (Patents Pending). (2) Air Filter Assemblies. (2) Remote Mount Brackets. (2) Sets of Remote Mount Fittings. (2) Sets of Spare Air Filter Elements. (8) Sets of Nuts, Bolts, Washers and Lock Washers. (2) Stainless Steel Braided Leader Hoses with Inline Check Valve. (6) Airline Clips with Included Hardware.
VIAIR 444C DUAL Pack Chrome Compressors Air Bag Air Ride Suspension 44432

Viair 480C Dual Pewter Compressor Pack with 165-200 PSI Switch Air Ride Suspension

Viair 480C Dual Pewter Compressor Pack with 165-200 PSI Switch Air Ride Suspension
Viair 480C Dual Pewter Compressor Pack with 165-200 PSI Switch Air Ride Suspension
Viair 480C Dual Pewter Compressor Pack with 165-200 PSI Switch Air Ride Suspension
Viair 480C Dual Pewter Compressor Pack with 165-200 PSI Switch Air Ride Suspension
Viair 480C Dual Pewter Compressor Pack with 165-200 PSI Switch Air Ride Suspension
Viair 480C Dual Pewter Compressor Pack with 165-200 PSI Switch Air Ride Suspension
Viair 480C Dual Pewter Compressor Pack with 165-200 PSI Switch Air Ride Suspension
Viair 480C Dual Pewter Compressor Pack with 165-200 PSI Switch Air Ride Suspension
Viair 480C Dual Pewter Compressor Pack with 165-200 PSI Switch Air Ride Suspension
Viair 480C Dual Pewter Compressor Pack with 165-200 PSI Switch Air Ride Suspension
Viair 480C Dual Pewter Compressor Pack with 165-200 PSI Switch Air Ride Suspension
Viair 480C Dual Pewter Compressor Pack with 165-200 PSI Switch Air Ride Suspension

Viair 480C Dual Pewter Compressor Pack with 165-200 PSI Switch Air Ride Suspension
Viair 480c Pewter Dual Compressor Pack 200 PSI. (2) 480c Pewter Air Compressors – (2) Air Filter Assemblies – (2) Remote Mount Brackets – (2) Sets of Remote Mount Fittings – (2) Sets of Spare Air Filter Elements – (2) Leader Hose Clips – (6) Air Line Clips with Included Hardware – (8) Sets of Nuts, Bolts, Washers and Lock Washers – (1) Heavy Duty Tube Style Fuse Holder (Up to 60-Amp fuse) – (2) Heavy Duty 40-Amp Relays – (1) One Heavy Duty Pressure Switch (165 PSI on, 200 PSI off) – (2) Stainless Steel Braided Leader Hoses with Inline Check Valve – Air Line (For Remote Mount Filter Installation). Working Pressure: 200 PSI – Max. Air Tank Size: 10.0 Gallon – Max. Performance Specs: 2.5 Gallon Tank Fill Rate 0 to 200 PSI 2 min. 165 to 200 PSI 38 sec. 5.0 Gallon Tank Fill Rate 0 to 200 PSI 5 min. 165 to 200 PSI 1 min. 10.0 Gallon Tank Fill Rate 0 to 200 PSI 10 min. 165 to 200 PSI 3 min.
Viair 480C Dual Pewter Compressor Pack with 165-200 PSI Switch Air Ride Suspension

Viair 444c Dual Pack Chrome Air Ride Bag Suspension Compressor Pump Train Rod

Viair 444c Dual Pack Chrome Air Ride Bag Suspension Compressor Pump Train Rod
Viair 444c Dual Pack Chrome Air Ride Bag Suspension Compressor Pump Train Rod
Viair 444c Dual Pack Chrome Air Ride Bag Suspension Compressor Pump Train Rod

Viair 444c Dual Pack Chrome Air Ride Bag Suspension Compressor Pump Train Rod
VIAIR 444C DUAL PACK CHROME AIR RIDE BAG SUSPENSION COMPRESSOR PUMP TRAIN ROD. This is for a Viair 444c Chrome Compressor dual pack. These compressors are an Excellent choice for Air Horns, Filling up tires and Custom Air Suspension. VIAIR’s 444C Dual Performance Value Pack air compressors feature a newly-developed head assembly, with a patent pending intercooler head, and is capable of a maximum 200 PSI with a 100% duty cycle to power an air suspension system or any other application you may have. The 444C Dual Performance Value Pack includes two 12-volt Chrome or Stealth Black VIAIR 444C air compressors, which are also equipped with a stainless steel braided leader hose with an inline check valve. Note: Use thread sealant for proper installation. Teflon tape is not recommended. Properly sealed, recommended torque is 12 to 15 ft. Working Pressure: 200 PSI- Max. Air Tank Size: 10.0 Gallon- Max. L x 4.2? W x 7.06? H (Each Unit)- Net Weight: 21.60 lbs. PERFORMANCE DATAPSICFMABARLPMA03.53250100.025103.25271.088.529202.97312.081.333302.86333.075.634402.72344.070.636502.58355.065.537602.47366.059.039702.35377.053.140802.19388.047.739902.03399.043.2391001.904010.038.8381101.744011.034.7371201.653912.030.6361301.533913.025.8341401.413814.023.8331501.32381601.22371701.13361801.00351900.89342000.8533 Supply Voltage: 13.8 VoltsFILL RATES2.5 Gallon TankFill Rate0 to 200 PSI2 min. 165 to 200 PSI46 sec. 5.0 Gallon TankFill Rate0 to 200 PSI5 min. 165 to 200 PSI1 min. With In House Custom Metal Works; CAD Drawings, CNC Plasma Cutting, Plate braking, MIG & TIG Welding, Tube Bending, and other Metal Art finishing processes, our production options are near endless. We use these products everyday on our own vehicles, so we know you are getting a quality part! Built by mini truckers for mini truckers! Thank you for your interest, business, and support! (2) 444C (Chrome or Stealth Black) Air Compressors. Intercooler Head (Patents Pending). (2) Air Filter Assemblies. (2) Remote Mount Brackets. (2) Sets of Remote Mount Fittings. (2) Sets of Spare Air Filter Elements. (8) Sets of Nuts, Bolts, Washers and Lock Washers. (2) Stainless Steel Braided Leader Hoses with Inline Check Valve. (6) Airline Clips with Included Hardware. Permanent Magnetic Motor. Working Pressure: 200 PSI. Air Tank Size: 10.0 Gallon. 12V Amp Draw: 40 Amps. Dimensions: 10.87? Net Weight: 21.60 lbs. Supply Voltage: 13.8 Volts. 2.5 Gallon Tank. 0 to 200 PSI. 165 to 200 PSI. 5.0 Gallon Tank. Illusive Design & Fabrications specializes in Air Ride Suspensions, and Metal Fabrication. The free listing tool. This item is in the category “eBay Motors\Parts & Accessories\Performance & Racing Parts\Auto Performance Parts\Chassis, Suspension & Brakes\Lower Kits & Parts”. The seller is “illusivedf” and is located in this country: US. This item can be shipped to United States, Canada.
  • Interchange Part Number: Slam Specialties, Air Lift, AVS, airmax,
  • Other Part Number: 480, 48012, 44432, 380c, 38033, 48032, ob2
  • Surface Finish: chrome
  • UPC: 818114004445
  • Warranty: Yes
  • Non-Domestic Product: No
  • Brand: VIAIR
  • Gas Charged Shock: No
  • Fitment Type: Performance/Custom
  • Manufacturer Part Number: 44432
  • Greasable or Sealed: Sealed
  • Drop Length: 4in.
  • Adjustable: Yes
  • Placement on Vehicle: Front
  • Performance Part: Yes
  • Part Type: Axle Flip Kit

Viair 444c Dual Pack Chrome Air Ride Bag Suspension Compressor Pump Train Rod

Viair 280c Air Compressor 150psi 2.5g Tank On Board Air with Air Spring Control

Viair 280c Air Compressor 150psi 2.5g Tank On Board Air with Air Spring Control
Viair 280c Air Compressor 150psi 2.5g Tank On Board Air with Air Spring Control
Viair 280c Air Compressor 150psi 2.5g Tank On Board Air with Air Spring Control
Viair 280c Air Compressor 150psi 2.5g Tank On Board Air with Air Spring Control
Viair 280c Air Compressor 150psi 2.5g Tank On Board Air with Air Spring Control
Viair 280c Air Compressor 150psi 2.5g Tank On Board Air with Air Spring Control
Viair 280c Air Compressor 150psi 2.5g Tank On Board Air with Air Spring Control
Viair 280c Air Compressor 150psi 2.5g Tank On Board Air with Air Spring Control
Viair 280c Air Compressor 150psi 2.5g Tank On Board Air with Air Spring Control
Viair 280c Air Compressor 150psi 2.5g Tank On Board Air with Air Spring Control

Viair 280c Air Compressor 150psi 2.5g Tank On Board Air with Air Spring Control
VIAIR 280c 150psi 2.5 Gallon H/D On Board Air System & Air Lift Pneumatic Air Bag Controller w/Gauge. VIAIR’s 280c on board air system produces a whopping 150psi. The tank is about the size of a medium fire extinguisher. So it fits easily areas like the trunk of a car, truck tool box and even in the engine compartment of some vehicles and of course it may also be mounted under the vehicle. 150psi Fast Filling HEAVY DUTY Kit. 2.5 Gallon Air Tank. Use For Air Horns. Use For Air Suspension – Air Springs (Pneumatic Air Bag Controller Included). Use For Air Lockers. Use For Emergency Tire Inflation. Viair Air System Specs: VIAIR 280c Compressor (28021) 12 Volt Max. AMP Draw: 19 Compressor Dimensions: 7.8” L. X 3.94” W. X 6.35” H. 2.5 Gallon Tank-6 Fitting Ports Air Tank Dimension: 23.5L. X 6.0W. X 7.5H. Viair Air System Also Includes: Pressure Switch 110psi ON / 150psi OFF 20 Feet Air Lines Tubing. 30 Amp Relay w/Relay Harness Reducer and Compression Fitting. Complete Instructions Included Free U. Air Lift Pneumatic Air Controller: Air Lift Single Needle Gauge Air Lift Pneumatic Toggle Switch Illuminated / Easy To Read 2.12 Gauge 20 Feet Air Lines Tubing. 2.5G Tank Fill Specs: 0 to 105 PSI —–2 Min. 0 to 145 PSI —–4 Min. 85 to 105 PSI—-0 Min. 110 to 145 PSI—–1 Min. Viair 280c Performance Data: 0 PSI – 1.59CFM / AMPS – 10 40 PSI – 1.04 CFM / AMPS – 15 90 PSI – 0.76 CFM / AMPS – 17 150 PSI – 0.51 CFM / AMPS – 17. C hec k Out our Awesome Feedback. All presumed defective or wrong items must obtain a Return Merchandise Authorization Number before returning. If you decide for whatever reason you would like to return any UNDAMAGED, UNUSED, UNOPENED item back to us. We will accept it. For the Continental U. Our Friends across the U. The free listing tool. This item is in the category “eBay Motors\Parts & Accessories\Performance & Racing Parts\Auto Performance Parts\Chassis, Suspension & Brakes\Lower Kits & Parts”. The seller is “aaco85205″ and is located in this country: US. This item can be shipped worldwide.
  • Brand: VIAIR A.P
  • Other Part Number: Fast Filling On Board Air Source System HD Kit
  • Interchange Part Number: Air Lift Air Bag Pneumatic Controller with Gauge, Viair 280c 2-1/2 Gallon Kit
  • Warranty: 1 Year
  • More Info: Use Air Tools Air Horns Lockers Air Bags Springs
  • Included Hardware: Air Compressor, Mounting Hardware, 2.5 Gallon Tank, Fittings, See Description For Complete List, 1/4\
  • Manufacturer Part Number: Viair 280c 91025 Air Lift 26161
  • Country/Region of Manufacture: Unknown
  • Placement on Vehicle: Left, Right, Front, Rear, Upper, Lower

Viair 280c Air Compressor 150psi 2.5g Tank On Board Air with Air Spring Control

Viair 480C Pewter Dual Air Compressor with 8 3/8 NPT 12V DC ASCO Valves, Bags

Viair 480C Pewter Dual Air Compressor with 8 3/8 NPT 12V DC ASCO Valves, Bags
Viair 480C Pewter Dual Air Compressor with 8 3/8 NPT 12V DC ASCO Valves, Bags

Viair 480C Pewter Dual Air Compressor with 8 3/8 NPT 12V DC ASCO Valves, Bags
Add to Favorite Sellers. AIR GAUGES & GAUGE PANELS. COMPLETE AIR RIDE KITS. COMPLETE BRACKET & BAGS KITS. FITTINGS & FLOW CONTROLS. ONBOARD & AIR SOURCE KITS. SWITCHES & SWITCH BOXES. Viair 480C “Pewter” Dual Air Compressor with 8 3/8 NPT 12V DC ASCO Valves, Bags. 1832 Lone Star Rd, Mansfield, TX 76063. Brand New Viair 480C “PEWTER” 200 PSI Max Dual Pack with 8 ASCO 3/8 12V DC 230 PSI Max Fast Electric Valves. Viair & ASCO are most trusted names when it comes down to Air Ride Suspension for your show class or daily driver Trucks & Cars. These valves will be able to lift heavy duty trucks and cars without any hassle. Viair 480C “Pewter” Dual Pack will come with 2-40 AMP Relays, 165/200 PSI Heavy Duty Pressure Switch and a heavy duty fuse holder (Fuse not Included). Use the Wire size chart in this listing to determine the wire size. Do not use 12AWG even if compressors are next to battery. Always mount compressors straight or side ways but not up side down. Providing 200PSI and a 100% duty cycle, VIAIR’s 480C Dual Performance Value Pack is an ideal air source solution for any air suspension kit, industrial applications, air horns, or off-road pneumatic needs. Each Dual Pack includes two VIAIR 480C Pewter, Chrome, or Stealth Black air compressors, two heavy duty 40-amp relays, a 165 PSI cut-on, 200 PSI cut-off pressure switch, and remote mount filter assemblies with mounting hardware. Note: Use thread sealant for proper installation. Teflon tape is not recommended. Properly sealed, recommended torque is 12 to 15 ft. This product contains chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. Duty Cycle: 100% AT 100 PSI (50% AT 200 PSI). Working Pressure: 200 PSI. Air Tank : 10 Gallon. 12V AMP Draw: 40 AMP Per Compressor. 2 Viair 480C “PEWTER” Compressors & 8 3/8 NPT 12V DC Normally Closed Valves. (2) Air Filter Assemblies. (2) Remote Mount Brackets. (2) Sets of Remote Mount Fittings. (2) Sets of Spare Filter Elements. (2) Leader Hose Clips. (6) Air Line Clips with Included Hardware. (8) Sets of Nuts, Bolts, Washers & Lock Washers. (1) Heavy Duty Tube Style Fuse Holder (up to 60 AMP Fuse). (1) Heavy Duty Pressure Switch (165 PSI ON, 200 PSI OFF). (2) Stainless Steel Braided Hoses (24 L) with inline check valve at end. Air Line For Remote Mount Filter Installation. 2.5 Gallon Tank. 0 to 200 PSI. 165 to 200 PSI. 5.0 Gallon Tank. 10.0 Gallon Tank. Always wire pressure switch from ignition source, do not wire it directly from battery as it will stay hot all time. Any leakage in bags, valves or fittings will make compressor run even if the vehicle not running. It will damage compressors in long run. Use proper gauge wire when wiring the compressors, do not use 12AWG wire similar to the end wire leads on compressors. This will cause wires to heat up with AMP draw (44 AMP, for dual compressors) and eventually wires will melt and compressor will be damaged. Do not use more than 10 Gallon tank with these compressors, ideal tank size for these compressors is 5 Gallon. Do not ground valves, amplifiers or any other devices at same spot where compressor or relays are grounded, this may cause more AMP draw then what system can handle. Use 80 AMP relay if possible with these compressors. Do not over tighten leader hose in to the tank port as it may result in to low air flow or no air flow from compressor to tank. It may also damage the inline check valve on leader hoses resulting in back flow of air pressure inside the tank. Use specified torque when tightening leader hoses. 12V DC Normally Closed 2 way pilot operated valves with 300 PSI Max. Comes with Air Flow arrow at the bottom of valve body. Just use two small prongs when wiring these valves, does not matter what prong is power and what is ground, do not use middle large prong. Always use thread sealant when connecting valves with fittings. WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. NO PO Box only to physical addresses in 48 states in USA. Newmatics Inc is a family owned company, established in 2008. We are authorized dealer for all major Air Suspension companies in USA. We sell only major brand name authentic, 100% genuine parts. We are located at 1832 Lone Star Rd, Mansfield, TX 76063. We will answer your question or concern within 24 hours. International Customers (including Mexico & Canada) – Please Note. We cannot under-value merchandise or mark the items as a gift on custom forms & Invoices. This is against US and international laws. Please make sure, your address information is correct and up to date. All return items must be authorized and approved by us. Your feedback is very important for us. We will definitely resolve it. You can leave us a voice message, someone from our staff will get back to you same day or within 24 hours regarding the help and assistance needed. This item is in the category “eBay Motors\Parts & Accessories\Performance & Racing Parts\Auto Performance Parts\Chassis, Suspension & Brakes\Lower Kits & Parts”. The seller is “newmatics” and is located in this country: US. This item can be shipped worldwide.
  • Country/Region of Manufacture: United States
  • Surface Finish: Brass,Black
  • Part Brand: ASCO,Viair
  • Kit or Single Part: Kit
  • Placement on Vehicle: Left, Right, Front, Rear, Upper, Lower
  • Brand: VIAIR
  • Warranty: 1 Year

Viair 480C Pewter Dual Air Compressor with 8 3/8 NPT 12V DC ASCO Valves, Bags

Viair 444C Single CHROME Front & Back Manual Air Ride Kit For 1/2 NPT Bags

Viair 444C Single CHROME Front & Back Manual Air Ride Kit For 1/2 NPT Bags

Viair 444C Single CHROME Front & Back Manual Air Ride Kit For 1/2 NPT Bags
Add to Favorite Sellers. AIR GAUGES & GAUGE PANELS. COMPLETE AIR RIDE KITS. COMPLETE BRACKET & BAGS KITS. FITTINGS & FLOW CONTROLS. ONBOARD & AIR SOURCE KITS. SWITCHES & SWITCH BOXES. Viair 444c single chrome basic front & back manual air ride suspension kit for 1/2″ npt air bags – comes with air lift 26229 manual paddle switch gauge panel, 2 gallon 6 port air tank with airline & fittings for 1/2″ npt port air bags. Note: air bags not included. 1832 Lone Star Rd, Mansfield, TX 76063. Brand new Basic Kit Valve kit for 1/2 NPT Bags. This kit will work only with 1/2 NPT Bags. This kit can be used as a very basic air bag install on your vehicle without the need of solenoid valves. This is bare minimum Air Suspension kit. All you need is Air Bags with 1/2 NPT ports and bag brackets to finish your install. This kit can be used as a simulation to check the ride height before installing a full kit. This kit can be used for front and rear bags. Each bag will be inflated or deflated with one manual Paddle switch. Just add Tank and compressor to finish the basic install. Ideal for Load support as well as Low Rider Applications. Only for 1/2 NPT Single Port Air Bags! This Kit will come with following items. (1) Air Lift 26229 Dual Manual Paddle Switch Gauge Panel (With Pre-Fitted Fittings) – (1) 2 Gallon 6 Port Tank (4 3/8″ NPT Ports & 2 1/4″ NPT Ports) – (1) Viair 444C CHROME Compressor with 40 AMP Relay and 165/200 PSI Pressure Switch – (50) FT of 1/4″ OD Airline (SMC Brand) – (4) 1/2″ X 1/4″ Reducer Bushings for Bags – (5) 90 Degree Swivel Elbows for 1/4″ OD Airline – (2) 1/4 PTC union Tee’s (All Sides) PTC. (2) 3/8″ X 1/4″ Reducer. (1) 1/4″ NPT Drain Valve – (1) 3/8″ X 1/8″ Reducer Bushing – (1) 1/4″ Hex Plugs. Permanent Magnetic Motor. Duty Cycle: 100% AT 100 PSI (50% AT 200 PSI). Working Pressure: 200 PSI. Air Tank : 5 Gallon. 12V AMP Draw: 23 AMP. 444C Single CHROME Compressor. With Thermal Overload Protectors. 1 Filter Assembly with 2 Spare Filter Elements. 1 Set of Remote Filter Fittings. (4) Sets of Nuts, Bolts, Washers & Lock Washers. 1 Stainless Steel Braided Hose. 3 Airline Clips. 2 Gallon 6 Port Steel Tank – Comes with Mounting Hardware. 4 (3/8) Ports One on Each, 2 on Tank Face. 2 1/4 NPT Ports One Top & One Bottom. 17.75″ L X 6.0″ DIA X 8.25 H. 200 PSI Max. 200 PSI Dual Needle Gauge Panel with Back Light, with 1/4″ OD Airline Fittings on the back (Pre-installed) – 10-12 Sec Lift Speed and 6-8 Sec Drop Speed – Mechanical Paddle Valves with return to center position feature – Pre-installed Fitting Connection for easy plumbing – Air Escape through the side with minimum noise – Control Each Corner (2 Panels) or Front & Back with Union Tee’s in between Bag lines – Can be used for load support bags – 7″ Long at mounting lip, 5.5″ long at the front panel, 3″ Wide with approx 2.75 long Gauge Body. WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. NO PO Box only to physical addresses in 48 states in USA. Newmatics Inc is a family owned company, established in 2008. We are authorized dealer for all major Air Suspension companies in USA. We sell only major brand name authentic, 100% genuine parts. We are located at 1832 Lone Star Rd, Mansfield, TX 76063. We will answer your question or concern within 24 hours. International Customers (including Mexico & Canada) – Please Note. We cannot under-value merchandise or mark the items as a gift on custom forms & Invoices. This is against US and international laws. Please make sure, your address information is correct and up to date. All return items must be authorized and approved by us. Your feedback is very important for us. We will definitely resolve it. You can leave us a voice message, someone from our staff will get back to you same day or within 24 hours regarding the help and assistance needed. This item is in the category “eBay Motors\Parts & Accessories\Performance & Racing Parts\Auto Performance Parts\Chassis, Suspension & Brakes\Lower Kits & Parts”. The seller is “newmatics” and is located in this country: US. This item can be shipped worldwide.
  • Modified Item: No
  • Country/Region of Manufacture: United States
  • Custom Bundle: Yes
  • Manufacturer Part Number: BASIC-444CH-12
  • Included Hardware: Tank Mounting Hardware- Nuts, Botls & Washers, Mounting Hardware
  • Surface Finish: BLACK & CHROME
  • Placement on Vehicle: Left, Right, Rear, Upper, Lower
  • Brand: Viair
  • Non-Domestic Product: No
  • Warranty: 1 Year
  • Bundle Description: Viair 444C Compressor, 2 Gallon Air Tank, Air Lift 26229 Manual Paddle Gauge Panel, DOT Airline, Pressure Switch, 40 AMP Relay & Fittings For Kit

Viair 444C Single CHROME Front & Back Manual Air Ride Kit For 1/2 NPT Bags

Viair 444C Single Black Basic Front Back Manual Kit For 1/2 NPT Bags Air Ride

Viair 444C Single Black Basic Front Back Manual Kit For 1/2 NPT Bags Air Ride

Viair 444C Single Black Basic Front Back Manual Kit For 1/2 NPT Bags Air Ride
Add to Favorite Sellers. AIR GAUGES & GAUGE PANELS. COMPLETE AIR RIDE KITS. COMPLETE BRACKET & BAGS KITS. FITTINGS & FLOW CONTROLS. ONBOARD & AIR SOURCE KITS. SWITCHES & SWITCH BOXES. VIAIR 444C BLACK” SINGLE AIR COMPRESSOR BASIC MANUAL KIT FOR 1/2″ NPT AIR BAGS WITH air lift 26229 – 2 MANUAL PADDLE VALVE GAUGE PANEL & ALL FITTINGS, 40 AMP RELAY, 165/200 PSI PRESSURE SWITCH. NOTE: AIR BAGS ARE NOT INCLUDED. 1832 Lone Star Rd, Mansfield, TX 76063. Brand new Basic Kit Valve kit for 1/2 NPT Bags. This kit will work only with 1/2 NPT Bags. This kit can be used as a very basic air bag install on your vehicle without the need of solenoid valves. This is bare minimum Air Suspension kit. All you need is Air Bags with 1/2 NPT ports and bag brackets to finish your install. This kit can be used as a simulation to check the ride height before installing a full kit. This kit can be used for front and rear bags. Each bag will be inflated or deflated with one manual Paddle switch. Just add Tank and compressor to finish the basic install. Ideal for Load support as well as Low Rider Applications. Only for 1/2 NPT Single Port Air Bags! This Kit will come with following items. (1) Air Lift 26229 Dual Manual Paddle Switch Gauge Panel (With Pre-Fitted Fittings) – (1) 2 Gallon 6 Port Tank (4 3/8″ NPT Ports & 2 1/4″ NPT Ports) – (1) Viair 444C “BLACK” Compressor with 40 AMP Relay and 165/200 PSI Pressure Switch – (50) FT of 1/4″ OD Airline (SMC Brand) – (4) 1/2″ X 1/4″ Reducer Bushings for Bags – (5) 90 Degree Swivel Elbows for 1/4″ OD Airline – (2) 1/4 PTC union Tee’s (All Sides) PTC. (2) 3/8″ X 1/4″ Reducer. (1) 1/4″ NPT Drain Valve – (1) 3/8″ X 1/8″ Reducer Bushing – (1) 1/4″ Hex Plugs. Permanent Magnetic Motor. Duty Cycle: 100% AT 100 PSI (50% AT 200 PSI). Working Pressure: 200 PSI. Air Tank : 5 Gallon. 12V AMP Draw: 23 AMP. 444C Single Black Compressor. With Thermal Overload Protectors. 1 Filter Assembly with 2 Spare Filter Elements. 1 Set of Remote Filter Fittings. (4) Sets of Nuts, Bolts, Washers & Lock Washers. 1 Stainless Steel Braided Hose. 3 Airline Clips. 2 Gallon 6 Port Steel Tank – Comes with Mounting Hardware. 4 (3/8) Ports One on Each, 2 on Tank Face. 2 1/4 NPT Ports One Top & One Bottom. 17.75″ L X 6.0″ DIA X 8.25 H. 200 PSI Max. 200 PSI Dual Needle Gauge Panel with Back Light, with 1/4″ OD Airline Fittings on the back (Pre-installed) – 10-12 Sec Lift Speed and 6-8 Sec Drop Speed – Mechanical Paddle Valves with return to center position feature – Pre-installed Fitting Connection for easy plumbing – Air Escape through the side with minimum noise – Control Each Corner (2 Panels) or Front & Back with Union Tee’s in between Bag lines – Can be used for load support bags – 7″ Long at mounting lip, 5.5″ long at the front panel, 3″ Wide with approx 2.75 long Gauge Body. WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. NO PO Box only to physical addresses in 48 states in USA. Newmatics Inc is a family owned company, established in 2008. We are authorized dealer for all major Air Suspension companies in USA. We sell only major brand name authentic, 100% genuine parts. We are located at 1832 Lone Star Rd, Mansfield, TX 76063. We will answer your question or concern within 24 hours. International Customers (including Mexico & Canada) – Please Note. We cannot under-value merchandise or mark the items as a gift on custom forms & Invoices. This is against US and international laws. Please make sure, your address information is correct and up to date. All return items must be authorized and approved by us. Your feedback is very important for us. We will definitely resolve it. You can leave us a voice message, someone from our staff will get back to you same day or within 24 hours regarding the help and assistance needed. This item is in the category “eBay Motors\Parts & Accessories\Performance & Racing Parts\Auto Performance Parts\Chassis, Suspension & Brakes\Lower Kits & Parts”. The seller is “newmatics” and is located in this country: US. This item can be shipped worldwide.
  • Modified Item: No
  • Country/Region of Manufacture: United States
  • Custom Bundle: Yes
  • Adjustable: Yes
  • Manufacturer Part Number: BASIC-444BK12
  • Included Hardware: Tank Mounting Hardware-Nuts, Bolts & Washers, Mounting Hardware
  • Surface Finish: Black
  • Placement on Vehicle: Left, Right, Front, Rear, Upper, Lower
  • Brand: VIAIR
  • Fitment Type: Performance/Custom
  • Non-Domestic Product: No
  • Warranty: 1 Year
  • Bundle Description: Viair 444C Compressor, 2 Gallon Air Tank, Air Lift 26229 Manual Paddle Gauge Panel, DOT Airline, Pressure Switch, 40 AMP Relay & Fittings For Kit

Viair 444C Single Black Basic Front Back Manual Kit For 1/2 NPT Bags Air Ride

Viair 444C Single Black Basic Front Back Manual Kit For 3/8 NPT Bags Air Ride

Viair 444C Single Black Basic Front Back Manual Kit For 3/8 NPT Bags Air Ride

Viair 444C Single Black Basic Front Back Manual Kit For 3/8 NPT Bags Air Ride
Add to Favorite Sellers. AIR GAUGES & GAUGE PANELS. COMPLETE AIR RIDE KITS. COMPLETE BRACKET & BAGS KITS. FITTINGS & FLOW CONTROLS. ONBOARD & AIR SOURCE KITS. SWITCHES & SWITCH BOXES. Viair 444C black single air compressor basic manual front & back kit for 3/8 npt air bags, with 2 manual paddle valve gauge panel & all fittings. Note: air bags are not included. 1832 Lone Star Rd, Mansfield, TX 76063. Brand new Basic Kit Valve kit for 3/8 NPT Bags. This kit will work only with 3/8 NPT Bags. This kit can be used as a very basic air bag install on your vehicle without the need of solenoid valves. This is bare minimum Air Suspension kit. All you need is Air Bags with 3/8 NPT ports and bag brackets to finish your install. This kit can be used as a simulation to check the ride height before installing a full kit. This kit can be used for front and rear bags. Each bag will be inflated or deflated with one manual Paddle switch. Just add Tank and compressor to finish the basic install. Ideal for Load support as well as Low Rider Applications Only for 3/8 NPT Single Port Air Bags! This Kit will come with following items. (1) Air Lift 26229 Dual Manual Paddle Switch Gauge Panel (With Pre-Fitted Fittings) – (1) 2 Gallon 6 Port Tank – (4 3/8″ NPT Ports, 2 1/4″ NPT Ports) – (1) Viair 444C “BLACK” Compressor with 40 AMP Relay and 165/200 PSI Pressure Switch – (50) FT of 1/4″ OD Airline (SMC Brand) – (4) Reducer Bushings for Bags – (5) 90 Degree Swivel Elbows for 1/4″ OD Airline – (2) 1/4 PTC union Tee’s (All Sides) PTC. (2) 3/8″ X 1/4″ Reducer Bushings – (1) 3/8″ X 1/8″ Reducer Bushing. (1) 1/4″ NPT Drain Valve – (1) 1/4″ Hex Plugs. Permanent Magnetic Motor. Duty Cycle: 100% AT 100 PSI (50% AT 200 PSI). Working Pressure: 200 PSI. Air Tank : 5 Gallon. 12V AMP Draw: 23 AMP. 444C Single Black Compressor. With Thermal Overload Protectors. 1 Filter Assembly with 2 Spare Filter Elements. 1 Set of Remote Filter Fittings. (4) Sets of Nuts, Bolts, Washers & Lock Washers. 1 Stainless Steel Braided Hose. 3 Airline Clips. 2 Gallon 6 Port Steel Tank – Comes with Mounting Hardware. 4 (3/8) Ports One on Each, 2 on Tank Face. 2 1/4 NPT Ports One Top & One Bottom. 17.75″ L X 6.0″ DIA X 8.25 H. 200 PSI Max. 200 PSI Dual Needle Gauge Panel with Back Light, with 1/4″ OD Airline Fittings on the back (Pre-installed) – 10-12 Sec Lift Speed and 6-8 Sec Drop Speed – Mechanical Paddle Valves with return to center position feature – Pre-installed Fitting Connection for easy plumbing – Air Escape through the side with minimum noise – Control Each Corner (2 Panels) or Front & Back with Union Tee’s in between Bag lines – Can be used for load support bags – 7″ Long at mounting lip, 5.5″ long at the front panel, 3″ Wide with approx 2.75 long Gauge Body. WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. NO PO Box only to physical addresses in 48 states in USA. Newmatics Inc is a family owned company, established in 2008. We are authorized dealer for all major Air Suspension companies in USA. We sell only major brand name authentic, 100% genuine parts. We are located at 1832 Lone Star Rd, Mansfield, TX 76063. We will answer your question or concern within 24 hours. International Customers (including Mexico & Canada) – Please Note. We cannot under-value merchandise or mark the items as a gift on custom forms & Invoices. This is against US and international laws. Please make sure, your address information is correct and up to date. All return items must be authorized and approved by us. Your feedback is very important for us. We will definitely resolve it. You can leave us a voice message, someone from our staff will get back to you same day or within 24 hours regarding the help and assistance needed. This item is in the category “eBay Motors\Parts & Accessories\Performance & Racing Parts\Auto Performance Parts\Chassis, Suspension & Brakes\Lower Kits & Parts”. The seller is “newmatics” and is located in this country: US. This item can be shipped worldwide.
  • Modified Item: No
  • Country/Region of Manufacture: United States
  • Custom Bundle: Yes
  • Manufacturer Part Number: BASIC-444BK
  • Included Hardware: Tank Mounting Hardware-Nuts & Bolts, Mounting Hardware
  • Surface Finish: Black
  • Placement on Vehicle: Left, Right, Front, Rear, Upper, Lower
  • Brand: VIAIR
  • Non-Domestic Product: No
  • Warranty: 1 Year
  • Bundle Description: Viair 444C Compressor, 2 Gallon Air Tank, Air Lift 26229 Manual Paddle Gauge Panel, DOT Airline, Pressure Switch, 40 AMP Relay & Fittings For Kit

Viair 444C Single Black Basic Front Back Manual Kit For 3/8 NPT Bags Air Ride

Viair 444C Chrome Basic Manual Kit For 3/8 NPT Bags with Gauge Panel Fittings

Viair 444C Chrome Basic Manual Kit For 3/8 NPT Bags with Gauge Panel Fittings

Viair 444C Chrome Basic Manual Kit For 3/8 NPT Bags with Gauge Panel Fittings
Add to Favorite Sellers. AIR GAUGES & GAUGE PANELS. COMPLETE AIR RIDE KITS. COMPLETE BRACKET & BAGS KITS. FITTINGS & FLOW CONTROLS. ONBOARD & AIR SOURCE KITS. SWITCHES & SWITCH BOXES. Viair 444c “chrome” single air compressor basic manual front & back kit for 3/8 npt air bags with 2 manual paddle valve gauge panel & all fittings. Note:- air bags are not included. 1832 Lone Star Rd, Mansfield, TX 76063. Brand new Basic Kit Valve kit for 3/8 NPT Bags. This kit will work only with 3/8 NPT Bags. This kit can be used as a very basic air bag install on your vehicle without the need of solenoid valves. This is bare minimum Air Suspension kit. All you need is Air Bags with 3/8 NPT ports and bag brackets to finish your install. This kit can be used as a simulation to check the ride height before installing a full kit. This kit can be used for front and rear bags. Each bag will be inflated or deflated with one manual Paddle switch. Just add Tank and compressor to finish the basic install. Ideal for Load support as well as Low Rider Applications. Only for 3/8 NPT Single Port Air Bags! This Kit will come with following items. (1) Air Lift 26229 Dual Manual Paddle Switch Gauge Panel (With Pre-Fitted Fittings) – (1) 2 Gallon 6 Port Tank (one 3/8″ Port on each end, one 1/4″ port top & bottom, two 1/4″ port on face 18″ L X 6″ W” X 7.5″ H) – (1) Viair 444C “CHROME” Compressor with 40 AMP Relay and 165/200 PSI Pressure Switch – (50) FT of 1/4″ OD Airline (SMC Brand) – (4) Reducer Bushings for Bags – (5) 90 Degree Swivel Elbows for 1/4″ OD Airline – (2) 1/4″ PTC union Tee’s (All Sides) PTC. (2) 3/8″ X 1/4″ Reducer. (1) 1/4″ NPT Drain Valve – (2) 1/4″ Hex Plugs. Permanent Magnetic Motor. Duty Cycle: 100% AT 100 PSI (50% AT 200 PSI). Working Pressure: 200 PSI. Air Tank : 10 Gallon. 12V AMP Draw: 40 AMP Per Compressor. 2 Viair 444C “CHROME” Compressors & 8 3/8 NPT 12V DC Normally Closed Valves. All Compressor Mount Hardware. 4 Spare Filters. (2) Stainless Steel Braided Hoses (21 L) with inline check valve at end. All remote filter mount accessories (Not the remote hoses). 2 Gallon 6 Port Steel Tank. 2 (3/8″) Ports One on Each End, 4 1/4″ Ports (1 1/4″ Top & Bottom, 2 1/4″ Ports on Face). 18″ L X 7.5″ H (with mounting legs) X 6 D. Painted Inside out to prevent rust. Tested at 150 PSI (operating Pressure can be 200 PSI). 200 PSI Dual Needle Gauge Panel with Back Light, with 1/4″ OD Airline Fittings on the back (Pre-installed) – 10-12 Sec Lift Speed and 6-8 Sec Drop Speed – Mechanical Paddle Valves with return to center position feature – Pre-installed Fitting Connection for easy plumbing – Air Escape through the side with minimum noise – Control Each Corner (2 Panels) or Front & Back with Union Tee’s in between Bag lines – Can be used for load support bags – 7″ Long at mounting lip, 5.5″ long at the front panel, 3″ Wide with approx 2.75 long Gauge Body. WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. NO PO Box only to physical addresses in 48 states in USA. Newmatics Inc is a family owned company, established in 2008. We are authorized dealer for all major Air Suspension companies in USA. We sell only major brand name authentic, 100% genuine parts. We are located at 1832 Lone Star Rd, Mansfield, TX 76063. We will answer your question or concern within 24 hours. International Customers (including Mexico & Canada) – Please Note. We cannot under-value merchandise or mark the items as a gift on custom forms & Invoices. This is against US and international laws. Please make sure, your address information is correct and up to date. All return items must be authorized and approved by us. Your feedback is very important for us. We will definitely resolve it. You can leave us a voice message, someone from our staff will get back to you same day or within 24 hours regarding the help and assistance needed. This item is in the category “eBay Motors\Parts & Accessories\Performance & Racing Parts\Auto Performance Parts\Chassis, Suspension & Brakes\Lower Kits & Parts”. The seller is “newmatics” and is located in this country: US. This item can be shipped worldwide.
  • Country/Region of Manufacture: United States
  • Manufacturer Part Number: BASIC-444CH-38
  • Surface Finish: Black
  • Placement on Vehicle: Left, Right, Rear
  • Brand: Air Lift, SMC,Viair
  • Warranty: Yes

Viair 444C Chrome Basic Manual Kit For 3/8 NPT Bags with Gauge Panel Fittings