fittings

Switch Suspension 4 Corner Manifold Valve WithSwitchbox With Fittings For 3/8 Hose

admin
Switch-Suspension-4-Corner-Manifold-Valve-WithSwitchbox-With-Fittings-For-3-8-Hose-01-cvxb
Switch Suspension 4 Corner Manifold Valve WithSwitchbox With Fittings For 3/8 Hose
Switch Suspension 4 Corner Manifold Valve WithSwitchbox With Fittings For 3/8 Hose
Switch Suspension 4 Corner Manifold Valve WithSwitchbox With Fittings For 3/8 Hose
Switch Suspension 4 Corner Manifold Valve WithSwitchbox With Fittings For 3/8 Hose
Switch Suspension 4 Corner Manifold Valve WithSwitchbox With Fittings For 3/8 Hose
Switch Suspension 4 Corner Manifold Valve WithSwitchbox With Fittings For 3/8 Hose

Switch Suspension 4 Corner Manifold Valve WithSwitchbox With Fittings For 3/8 Hose
Switch Suspension the valve manifold!! We are proud to offer our latest 4 corner billet valve manifold. This manifold offers control of each wheel independently. Paired with a plug & play switch box for easy installation. The 7 rocker switch box offers front up/down, rear up/down & all up/down control into they’re own respective switch as well as individual up/down control of each wheel. Fully Blacked out finish for good looks or a stealth install. Wiring is extra simple with plug & play control. Supply 12v power and ground and your up and running. AIR FITTINGS INCLUDED ARE FOR 3/8 AIR LINE. This item is in the category “eBay Motors\Parts & Accessories\Performance & Racing Parts\Auto Performance Parts\Chassis, Suspension & Brakes\Lower Kits & Parts”. The seller is “switch-suspension” and is located in this country: US. This item can be shipped to United States, Canada.
  • Non-Domestic Product: No
  • Other Part Number: SwitchSuspension
  • Gas Charged Shock: No
  • Warranty: Lifetime
  • Bundle Description: 4 Corner Manifold Valve W/Switchbox
  • Custom Bundle: Yes
  • Fitment Type: Performance/Custom
  • Greasable or Sealed: Sealed
  • Manufacturer Part Number: AIRVALVEMANSB-3/8
  • Adjustable: Yes
  • Modified Item: No
  • Placement on Vehicle: Left, Right, Front, Rear, Lower
  • Brand: Switch Suspension
  • Interchange Part Number: air ride suspension air bag system control, airride Suspension AMP management, 3-presets heights AA-ELS4-TPAD-EN, Replaces airlift 3p + E-level plus +, Replaces Accuair Switchspeed Elevel, Plug and play Evolve AVS, replaces E-level VU4, Air lift performance 3p 27685 27680, airvalve Manifold airride E-Level, Vu2 Vu4 Vx4, aa-VX2
  • Country/Region of Manufacture: United States
  • Part Type: Suspension Lowering Hardware Kit

Switch Suspension 4 Corner Manifold Valve WithSwitchbox With Fittings For 3/8 Hose

1956 Chevrolet Impala Bel Air Front Bags Brackets 1/2 Fittings Hose 2600 D-I

admin
1956-Chevrolet-Impala-Bel-Air-Front-Bags-Brackets-1-2-Fittings-Hose-2600-D-I-01-bxsx
1956 Chevrolet Impala Bel Air Front Bags Brackets 1/2 Fittings Hose 2600 D-I

1956 Chevrolet Impala Bel Air Front Bags Brackets 1/2 Fittings Hose 2600 D-I
Bolt on Front Air Bag Brackets and Bags. Kit Includes: Two – Standard 2600 Air Bag One Pair of Front Upper Bolt on Air Bag Brackets One Pair of Front Lower Control Arm Bolt on Air Bag Brackets. Two 1/2″NPT x 3/8″ Hose Fittings. 25 Feet 3/8 Airline. This item is in the category “eBay Motors\Parts & Accessories\Performance & Racing Parts\Auto Performance Parts\Chassis, Suspension & Brakes\Lower Kits & Parts”. The seller is “chassis_tech” and is located in this country: US. This item can be shipped to United States, Canada.
  • Non-Domestic Product: No
  • Other Part Number: Air ride suspension mounts bracket ride mount kit
  • Warranty: 90 Day
  • Custom Bundle: No
  • Fitment Type: Performance/Custom
  • Bundle Listing: Yes
  • Adjustable: Yes
  • Modified Item: No
  • Placement on Vehicle: Left, Right, Front, Upper, Lower
  • Brand: CHASSIS TECH
  • Included Hardware: Air Bag
  • Manufacturer: Chassis Tech

1956 Chevrolet Impala Bel Air Front Bags Brackets 1/2 Fittings Hose 2600 D-I

Viair 444C Chrome Basic Manual Kit For 3/8 NPT Bags with Gauge Panel Fittings

admin
Viair-444C-Chrome-Basic-Manual-Kit-For-3-8-NPT-Bags-with-Gauge-Panel-Fittings-01-mpw
Viair 444C Chrome Basic Manual Kit For 3/8 NPT Bags with Gauge Panel Fittings

Viair 444C Chrome Basic Manual Kit For 3/8 NPT Bags with Gauge Panel Fittings
Add to Favorite Sellers. AIR GAUGES & GAUGE PANELS. COMPLETE AIR RIDE KITS. COMPLETE BRACKET & BAGS KITS. FITTINGS & FLOW CONTROLS. ONBOARD & AIR SOURCE KITS. SWITCHES & SWITCH BOXES. Viair 444c “chrome” single air compressor basic manual front & back kit for 3/8 npt air bags with 2 manual paddle valve gauge panel & all fittings. Note:- air bags are not included. 1832 Lone Star Rd, Mansfield, TX 76063. Brand new Basic Kit Valve kit for 3/8 NPT Bags. This kit will work only with 3/8 NPT Bags. This kit can be used as a very basic air bag install on your vehicle without the need of solenoid valves. This is bare minimum Air Suspension kit. All you need is Air Bags with 3/8 NPT ports and bag brackets to finish your install. This kit can be used as a simulation to check the ride height before installing a full kit. This kit can be used for front and rear bags. Each bag will be inflated or deflated with one manual Paddle switch. Just add Tank and compressor to finish the basic install. Ideal for Load support as well as Low Rider Applications. Only for 3/8 NPT Single Port Air Bags! This Kit will come with following items. (1) Air Lift 26229 Dual Manual Paddle Switch Gauge Panel (With Pre-Fitted Fittings) – (1) 2 Gallon 6 Port Tank (one 3/8″ Port on each end, one 1/4″ port top & bottom, two 1/4″ port on face 18″ L X 6″ W” X 7.5″ H) – (1) Viair 444C “CHROME” Compressor with 40 AMP Relay and 165/200 PSI Pressure Switch – (50) FT of 1/4″ OD Airline (SMC Brand) – (4) Reducer Bushings for Bags – (5) 90 Degree Swivel Elbows for 1/4″ OD Airline – (2) 1/4″ PTC union Tee’s (All Sides) PTC. (2) 3/8″ X 1/4″ Reducer. (1) 1/4″ NPT Drain Valve – (2) 1/4″ Hex Plugs. Permanent Magnetic Motor. Duty Cycle: 100% AT 100 PSI (50% AT 200 PSI). Working Pressure: 200 PSI. Air Tank : 10 Gallon. 12V AMP Draw: 40 AMP Per Compressor. 2 Viair 444C “CHROME” Compressors & 8 3/8 NPT 12V DC Normally Closed Valves. All Compressor Mount Hardware. 4 Spare Filters. (2) Stainless Steel Braided Hoses (21 L) with inline check valve at end. All remote filter mount accessories (Not the remote hoses). 2 Gallon 6 Port Steel Tank. 2 (3/8″) Ports One on Each End, 4 1/4″ Ports (1 1/4″ Top & Bottom, 2 1/4″ Ports on Face). 18″ L X 7.5″ H (with mounting legs) X 6 D. Painted Inside out to prevent rust. Tested at 150 PSI (operating Pressure can be 200 PSI). 200 PSI Dual Needle Gauge Panel with Back Light, with 1/4″ OD Airline Fittings on the back (Pre-installed) – 10-12 Sec Lift Speed and 6-8 Sec Drop Speed – Mechanical Paddle Valves with return to center position feature – Pre-installed Fitting Connection for easy plumbing – Air Escape through the side with minimum noise – Control Each Corner (2 Panels) or Front & Back with Union Tee’s in between Bag lines – Can be used for load support bags – 7″ Long at mounting lip, 5.5″ long at the front panel, 3″ Wide with approx 2.75 long Gauge Body. WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. NO PO Box only to physical addresses in 48 states in USA. Newmatics Inc is a family owned company, established in 2008. We are authorized dealer for all major Air Suspension companies in USA. We sell only major brand name authentic, 100% genuine parts. We are located at 1832 Lone Star Rd, Mansfield, TX 76063. We will answer your question or concern within 24 hours. International Customers (including Mexico & Canada) – Please Note. We cannot under-value merchandise or mark the items as a gift on custom forms & Invoices. This is against US and international laws. Please make sure, your address information is correct and up to date. All return items must be authorized and approved by us. Your feedback is very important for us. We will definitely resolve it. You can leave us a voice message, someone from our staff will get back to you same day or within 24 hours regarding the help and assistance needed. This item is in the category “eBay Motors\Parts & Accessories\Performance & Racing Parts\Auto Performance Parts\Chassis, Suspension & Brakes\Lower Kits & Parts”. The seller is “newmatics” and is located in this country: US. This item can be shipped worldwide.
  • Country/Region of Manufacture: United States
  • Manufacturer Part Number: BASIC-444CH-38
  • Surface Finish: Black
  • Placement on Vehicle: Left, Right, Rear
  • Brand: Air Lift, SMC,Viair
  • Warranty: Yes

Viair 444C Chrome Basic Manual Kit For 3/8 NPT Bags with Gauge Panel Fittings

Viair 380C Black Single Basic Manual Kit For 3/8 NPT Air Bags with Fittings

admin
Viair-380C-Black-Single-Basic-Manual-Kit-For-3-8-NPT-Air-Bags-with-Fittings-01-ffm
Viair 380C Black Single Basic Manual Kit For 3/8 NPT Air Bags with Fittings

Viair 380C Black Single Basic Manual Kit For 3/8 NPT Air Bags with Fittings
Add to Favorite Sellers. AIR GAUGES & GAUGE PANELS. COMPLETE AIR RIDE KITS. COMPLETE BRACKET & BAGS KITS. FITTINGS & FLOW CONTROLS. ONBOARD & AIR SOURCE KITS. SWITCHES & SWITCH BOXES. Viair 380c stealth black single air compressor basic manual kit for 3/8 npt port air bags with 2 MANUAL PADDLE VALVE GAUGE PANEL & fittings, 40 amp relay, 165/200 psi pressure switch. Note: air bags are not included. 1832 Lone Star Rd, Mansfield, TX 76063. Brand new Basic Kit Valve kit for 3/8 NPT Bags. This kit will work only with 3/8 NPT Bags. This kit can be used as a very basic air bag install on your vehicle without the need of solenoid valves. This is bare minimum Air Suspension kit. All you need is Air Bags with 3/8 NPT ports and bag brackets to finish your install. This kit can be used as a simulation to check the ride height before installing a full kit. This kit can be used for front and rear bags. Each bag will be inflated or deflated with one manual Paddle switch. Just add Tank and compressor to finish the basic install. Ideal for Load support as well as Low Rider Applications. Only for 3/8 NPT Single Port Air Bags! This Kit will come with following items. (1) Air Lift 26229 Dual Manual Paddle Switch Gauge Panel (With Pre-Fitted Fittings) – (1) 2 Gallon 6 Port Tank (one 3/8″ Port on each end, one 1/4″ port top & bottom, two 1/4″ port on face 18″ L X 6″ W” X 7.5″ H) – (1) Viair 380C “Stealth Black” Air Compressor with 40 AMP Relay and 165/200 PSI Pressure Switch – (50) FT of 1/4″ OD Airline (SMC Brand) – (4) Reducer Bushings for Bags – (5) 90 Degree Swivel Elbows for 1/4″ OD Airline – (2) 1/4″ PTC union Tee’s (All Sides) PTC. (2) 3/8″ X 1/4″ Reducer. (1) 1/4″ NPT Drain Valve – (2) 1/4″ Hex Plugs. (1) 380C (Stealth Black) Compressors – (1) Air Filter Assemblies – (1) Remote Mount Brackets – (1) Sets of Remote Mount Fittings – (1) Sets of Spare Air Filter Elements – (1) Leader Hose Clips – (3) Air Line Clips with Included Hardware – (4) Sets of Nuts, Bolts, Washers and Lock Washers – (1) Stainless Steel Braided Leader Hoses with Inline Check Valve – Air Line (For Remote Mount Filter Installation). Working Pressure: 200 PSI – Max. Air Tank Size: 10.0 Gallon – Max. 2 Gallon 6 Port Steel Tank. 2 (3/8″) Ports One on Each End, 4 1/4″ Ports (1 1/4″ Top & Bottom, 2 1/4″ Ports on Face). 18″ L X 7.5″ H (with mounting legs) X 6 D. Painted Inside out to prevent rust. Tested at 150 PSI (operating Pressure can be 200 PSI). 200 PSI Dual Needle Gauge Panel with Back Light, with 1/4″ OD Airline Fittings on the back (Pre-installed) – 10-12 Sec Lift Speed and 6-8 Sec Drop Speed – Mechanical Paddle Valves with return to center position feature – Pre-installed Fitting Connection for easy plumbing – Air Escape through the side with minimum noise – Control Each Corner (2 Panels) or Front & Back with Union Tee’s in between Bag lines – Can be used for load support bags – 7″ Long at mounting lip, 5.5″ long at the front panel, 3″ Wide with approx 2.75 long Gauge Body. WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. NO PO Box only to physical addresses in 48 states in USA. Newmatics Inc is a family owned company, established in 2008. We are authorized dealer for all major Air Suspension companies in USA. We sell only major brand name authentic, 100% genuine parts. We are located at 1832 Lone Star Rd, Mansfield, TX 76063. We will answer your question or concern within 24 hours. International Customers (including Mexico & Canada) – Please Note. We cannot under-value merchandise or mark the items as a gift on custom forms & Invoices. This is against US and international laws. Please make sure, your address information is correct and up to date. All return items must be authorized and approved by us. Your feedback is very important for us. We will definitely resolve it. You can leave us a voice message, someone from our staff will get back to you same day or within 24 hours regarding the help and assistance needed. This item is in the category “eBay Motors\Parts & Accessories\Performance & Racing Parts\Auto Performance Parts\Chassis, Suspension & Brakes\Lower Kits & Parts”. The seller is “newmatics” and is located in this country: US. This item can be shipped worldwide.
  • Surface Finish: Black
  • Country/Region of Manufacture: United States
  • Manufacturer Part Number: BASIC-380BK-38
  • Placement on Vehicle: Left, Right, Rear
  • Brand: Air Lift, SMC,Viair
  • Warranty: 6 Month

Viair 380C Black Single Basic Manual Kit For 3/8 NPT Air Bags with Fittings

AIR ENGINE 1/2 Port Air Valve Manifold with fittings 7 switchbox controller

admin
AIR-ENGINE-1-2-Port-Air-Valve-Manifold-with-fittings-7-switchbox-controller-01-gfwi
AIR ENGINE 1/2 Port Air Valve Manifold with fittings 7 switchbox controller

AIR ENGINE 1/2 Port Air Valve Manifold with fittings 7 switchbox controller
This system does require hardwiring. This item is in the category “eBay Motors\Parts & Accessories\Performance & Racing Parts\Auto Performance Parts\Chassis, Suspension & Brakes\Lower Kits & Parts”. The seller is “chassis_tech” and is located in this country: US. This item can be shipped to United States, Canada.
  • Brand: CHASSIS TECH
  • Manufacturer: Chassis Tech
  • Part Brand: Chassis Tech
  • MPN: 2.65186E+11
  • Interchange Part Number: compressor bag airbag bags airbags ride fbss
  • Placement on Vehicle: Left, Right, Front, Rear
  • Other Part Number: airride brass valves fast 2-way system kit
  • Warranty: Yes
  • Surface Finish: Brass

AIR ENGINE 1/2 Port Air Valve Manifold with fittings 7 switchbox controller

Adjustable Bolt On Rear Axle Air Ride Bag Bracket Kit- 2600lb Bags Fittings Line

admin
Adjustable-Bolt-On-Rear-Axle-Air-Ride-Bag-Bracket-Kit-2600lb-Bags-Fittings-Line-01-wp
Adjustable Bolt On Rear Axle Air Ride Bag Bracket Kit- 2600lb Bags Fittings Line
Adjustable Bolt On Rear Axle Air Ride Bag Bracket Kit- 2600lb Bags Fittings Line
Adjustable Bolt On Rear Axle Air Ride Bag Bracket Kit- 2600lb Bags Fittings Line

Adjustable Bolt On Rear Axle Air Ride Bag Bracket Kit- 2600lb Bags Fittings Line
For almost 40 years, Steves House Of Speed has been satisfying customers needs by providing them with the parts they need at the lowest prices. We house the most comprehensive collection of parts and accessories in the world. If your parts-shopping experience is a hit-or-miss or simply unsatisfactory, switch over to us. You wont regret it! We offer the Right Part and the Perfect Fit!!! Other auto parts stores carry only a couple of thousand parts in stock. Sometimes, it can get very frustrating when you spend time, sweat, and gas only to be told that they dont have what you need. Well, youll never experience that here at Steves House Of Speed! Our huge warehouse has over 1 million parts for over 25 million different vehicles. Add to that more than 100,000 accessories for over 6 million rides and what you get is the right part with the perfect fit. No more frustration, no more stalled restoration projects, no more having to wait to get back on the road! Youll find what you want right here. We stock products that are just as good (or better) than those your ride came with. If you need your parts fast, then youll feel right at home here with Steves House Of Speed. Adjustable Bolt On Rear Axle Air Ride Bag Bracket Kit- 2600lb Bags Fittings Line. Includes a pair of adjustable rear 3 inch axle air bag brackets with hardware. Made of heavy duty 3/16 inch steel then black oil soaked with an anti-rust coating, these brackets are designed for performance. Mounts over or under your axle. Bolts on to frame and welds onto axle. Includes 2 axle brackets, 2 upper bag brackets, 2 lower bag brackets, 16 grade 8 bolts & nuts, 2 2600 lb bags, 50 air line & 2 elbow fittings Material :: Steel Finish :: Black Oil Soak Anti Rust Coating :: Yes Thickness :: 3/16 Axle Bracket :: 2 Upper Bag Bracket :: 2 Lower Bag Bracket :: 2 Hardware :: 16 Bolts & Nuts Included Hardware Grade :: Grade 8 Axle :: 3 Axles Adjustable :: 3 Mount :: Over or Under Axle Includes :: 50 3/8 Air Line Includes :: 2 Elbow Fittings Includes :: 2 2600lb Air Bags. Stock photos may not be an exact representation of the item. Please read all product info, descriptions and terms before purchasing. All of your items fit in one box. The item “Adjustable Bolt On Rear Axle Air Ride Bag Bracket Kit- 2600lb Bags Fittings Line” is in sale since Tuesday, April 23, 2019. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Suspension & Steering\Other”. The seller is “steveshouseospeed” and is located in Patterson, New York. This item can be shipped worldwide.
  • Manufacturer Part Number: ZHS7C9C4
  • Other Part Number: 1233621
  • Brand: Suspension Pros

Adjustable Bolt On Rear Axle Air Ride Bag Bracket Kit- 2600lb Bags Fittings Line

Air Lift Dominator 2- 2600 lbs Air Bags 1/4 OD Airline Schrader Valve, Fittings

admin
Air-Lift-Dominator-2-2600-lbs-Air-Bags-1-4-OD-Airline-Schrader-Valve-Fittings-01-vnx
Air Lift Dominator 2- 2600 lbs Air Bags 1/4 OD Airline Schrader Valve, Fittings

Air Lift Dominator 2- 2600 lbs Air Bags 1/4 OD Airline Schrader Valve, Fittings
Add to Favorite Sellers. AIR GAUGES & GAUGE PANELS. COMPLETE AIR RIDE KITS. COMPLETE BRACKET & BAGS KITS. FITTINGS & FLOW CONTROLS. ONBOARD & AIR SOURCE KITS. SWITCHES & SWITCH BOXES. 2 Pack Air Lift Dominator 2600 LBS with 1/4 Basic Inflation Kit Air Ride. 1832 Lone Star Rd, Mansfield, TX 76063. Air Lift Dominator 2600 lbs. 2 pack Air Bags with ¼ OD Airline Schrader valve inflation kit. This kit includes the fittings to reduce the bag ports from ½ NPT to ¼ (with reducer bushings). The Schrader valve inflation kit can be used to mock up the vehicles ride height based on rim and tire sizes. This kit can be used to inflate bags manually without the need of 12V Dc onboard Air Compressor or solenoid valves. Super easy to install, quick to setup vehicle on air Bags. Note: This air bag Schrader valve kit will come only with ¼ OD Airline, ¼ OD Airline Fittings and reducer bushings to convert ½ NPT port to ¼ Port. This kit will not come with any mounting hardware or bag brackets. Complete Inflation Valve kit with 1/2 NPT Bags. This Kit will come with following items: – (2) Alkon brand PTC Schrader valve 1/4″ OD Airline – (2) [2] Dominator 2600 LBS – (2) 1/2″ MNPT X 1/4″ FNPT Reducers – (2) 1/4″ PTC X 1/4″ NPT Swivel Elbows – (20) FT SMC 1/4″ OD DOT approved Airline. Maximum Extended Height: 12.5. Compressed Height: 2.8. Maximum Load at 100 PSI: 3,055 lbs. Design Height: 6.0-9.0. Air Fitting Size: 1/2. Top Fastener: 3/8 16 UNC. Bottom Fastener: 3/8 16 UNC. Mounting Hole Center: 2.75. WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. In all 50 States in USA. Newmatics Inc is a family owned company, established in 2008. We are authorized dealer for all major Air Suspension companies in USA. We sell only major brand name authentic, 100% genuine parts. We are located at 1832 Lone Star Rd, Mansfield, TX 76063. We will answer your question or concern within 24 hours. International Customers (including Mexico & Canada) – Please Note. We cannot under-value merchandise or mark the items as a gift on custom forms & Invoices. This is against US and international laws. Please make sure, your address information is correct and up to date. All return items must be authorized and approved by us. Your feedback is very important for us. We will definitely resolve it. You can leave us a voice message, someone from our staff will get back to you same day or within 24 hours regarding the help and assistance needed. The item “Air Lift Dominator 2- 2600 lbs Air Bags 1/4 OD Airline Schrader Valve, Fittings” is in sale since Tuesday, January 19, 2016. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Suspension & Steering\Lower Kits & Parts”. The seller is “newmatics” and is located in Mansfield, Texas. This item can be shipped worldwide.
  • Country/Region of Manufacture: China
  • Adjustable: Yes
  • California Prop 65 Warning: WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
  • Manufacturer Part Number: D2600-INFL-KIT12
  • Gas Charged Shock: No
  • Included Hardware: 30 FT 1/4″ OD SMC Airline
  • Surface Finish: Black
  • Part Brand: Air Lift
  • UPC: 729199586163
  • Kit or Single Part: Kit
  • Placement on Vehicle: Left
  • Brand: Air Lift
  • Warranty: 6 Month

Air Lift Dominator 2- 2600 lbs Air Bags 1/4 OD Airline Schrader Valve, Fittings