Ekstensive Metal Works C10 Rear 2-Link Weld on Air Ride Suspension Kit 2600 Bags

May 4, 2024 admin

Ekstensive Metal Works C10 Rear 2-Link Weld on Air Ride Suspension Kit 2600 Bags

Our builder series rear weld on 2-link suspension kit with our partner Ekstensive Metal Works. Rear 2 Link bolts into the factory hangers and is designed specifically for the square body C10. Weld in rear 8 pcs notch and over the axle mounting brackets. Two C10 2 link bars with Urethane Bushings. One weld on panhard bar and brackets. One U-bolt kit with spring plates. One set of Over the Axle air bag brackets. One set of 8 pcs weld on 9 notch. Two Airmaxxx 2600 1/2 port air bags. See our other Ekstensive Metal Works Rear Kits.

Ekstensive Metal Works Rear 2-Link Weld on Air Ride Suspension Chevy 88-98 C15

April 29, 2024 admin

Ekstensive Metal Works Rear 2-Link Weld on Air Ride Suspension Chevy 88-98 C15

Our builder series rear weld on 2-link suspension kit with our partner Ekstensive Metal Works. Rear 2 Link bolts into the factory hangers and is designed specifically for the square body C10. Weld in rear 8 pcs notch and over the axle mounting brackets. Two C15 2 link bars with Urethane Bushings. One weld on panhard bar and brackets. One U-bolt kit with spring plates. One set of Over the Axle air bag brackets. One set of 8 pcs weld on 9 notch. Two airmaxxx 2600 Air Bags. See our other Ekstensive Metal Works Rear Kits.

Ekstensive Metal Works C10 Rear 2-Link Air Ride Suspension Kit Airmaxxx 2600

March 11, 2024 admin

Ekstensive Metal Works C10 Rear 2-Link Air Ride Suspension Kit Airmaxxx 2600

This 73-87 Rear Air Suspension Kit is designed exclusively to fit C10 Trucks with 24″ wheels, it can give your truck a “laid down look. The one-piece notch slips easily over the frame and welds in place, and comes pre-equipped with upper shock mounts on the crossbars. Completion of the customized lowering requires cutting the frame and box at the bottom and using the filler pieces supplied. The 2 link bars attach to factory hangers, and u-bolt the rear end. Lower bag mounts and lower shock mounts are already installed, and the upper bag mounts can be welded directly to the outside of the frame. Finally, the pan hard bar frame mount is already included on the notch, so you just attach and weld the axle mount, and your air bags will be ready to go. Kit includes everything you need to bag the rear of you C10.

FASTBAG 3/8 Air Ride Suspension Kit Ekstensive 2-Link Fits 99-06 Silverado 1500

February 16, 2024 admin

FASTBAG 3/8 Air Ride Suspension Kit Ekstensive 2-Link Fits 99-06 Silverado 1500

Fast Air Ride Suspension System. With Full 4 Independent Corner Control. And Rear 2 Link Notch Kit. Ekstensive Metal Works Rear Suspension Kit. This air suspension kit is specifically designed for 99-06 Chevy/GMC Silverado/Sierra 1/2 ton trucks, allowing them to be lowered to the ground with a 33″ tall tire and 26-28″ wheel. The notch comes in one piece and easily fits over the frame, with the option to weld it on for added security. Additionally, the upper shock mounts are pre-welded onto the crossbars, saving installation time. Once the notch is installed, simply use the filler pieces provided to cut the frame and box in the bottom to create a smooth notch. The 2 link bars can then be attached to the factory hangers and bolted to the rear end using the included u-bolt kit. These bars already have the lower bag mounts and lower shock mounts installed with a 4 block. To complete the installation, the upper bag mounts are placed over the 2 link bag mounts and welded on, followed by attaching the pan hard bar using. 1999 – 2006 Chevrolet Silverado 1500. 1999 – 2006 GMC Sierra 1500. Air Ride Suspension Kit. Airmaxxx Front Bolt On Air Bag Cups. Airmaxxx Rear Weld On Air Bag Mounts. (2) Maxtrac Rear Mono-Tube Gas Shocks. (4) airmaxxx 2600 1/2. Airmaxxx Black 480 Dual Air Compressors. 150 on – 180 off Pressure Switch. Airmaxxx Black 5 Gallon 9 Port Steel Air Tank. (8) 3/8 Fast Flow Brass Valves w/Mounts. Airmaxxx 7 Switch Hand Held Controller. 50ft 3/8 DOT Air Hose. Nickle Plated Brass PTC Fitting Kit. Air Hose Cutter &. Airmaxxx Dual Air Compressor Wiring Kit.

Air Lift 27685 3P Air Ride Suspension Kit Ekstensive 2-Link For 88-98 GM C15

January 14, 2024 admin

Air Lift 27685 3P Air Ride Suspension Kit Ekstensive 2-Link For 88-98 GM C15

Air Lift Performance 3P All In One Plug n Play Air Ride Kit with Pressure Presets. All The Wiring, Hose & Fittings Needed Included. Ekstensive Metal Works Rear Air Ride Kit. It will fit 1/2 ton only. One piece of the notch slips over the frame and welds on, with the upper shock mounts pre-welded to the crossmember. Once installed, cut the frame and box with the filler pieces provided, and the truck is notched. Bolt the two link bars to the factory hangers, and then to the rear end with the u-bolt kit supplied. The lower bag mounts and shock mounts have already been installed on the bars, with a 2 block. To finish, the upper bag mounts are placed on a crossbar supplied, then welded. Lastly, the pan hard bar bolts to the notch frame mount and welds to the axle mount, and the suspension is air-bag-ready. 1992 – 2000 Chevrolet / GMC SUV (Tahoe, Suburban, Yukon). To See More OBS Kits. Air Lift 3P with 3/8 Air Lines (27685). Airmaxxx Black 580 Dual Air Compressors. Airmaxxx 2nd Compressor Wire Harness. Airmaxxx Compressor Isolator Mounting Kit. Airmaxxx Seamless Spun Black Aluminum 5 Gallon 7 Port Air Tank. Airmaxxx 2600 Air Bags. Front & Rear Air Bag Mounting Brackets. Ekstensive Rear 2-Link & Notch Suspension Kit. FREE UPGRADE airmaxxx Compressor Isolator Mounting Kit.

Ekstensive Metal Works Rear Air Ride Suspension Kit Airbag shocks 88-98 GM 1500

December 26, 2023 admin

Ekstensive Metal Works Rear Air Ride Suspension Kit Airbag shocks 88-98 GM 1500

Ekstensive Rear 2-Link Kit with Air Bags and Shocks. It will fit 1/2 ton only. One piece of the notch slips over the frame and welds on, with the upper shock mounts pre-welded to the crossmember. Once installed, cut the frame and box with the filler pieces provided, and the truck is notched. Bolt the two link bars to the factory hangers, and then to the rear end with the u-bolt kit supplied. The lower bag mounts and shock mounts have already been installed on the bars, with a 2 block. To finish, the upper bag mounts are placed on a crossbar supplied, then welded. Lastly, the pan hard bar bolts to the notch frame mount and welds to the axle mount, and the suspension is air-bag-ready. Great Kit For Your 1988-98 Chevy/GMC 1500 2wd Truck. Valve Manifolds Use Less Fittings, Easier and Cleaner Install. Check Out In Stock Air Ride Kits or Message Us With Questions! Fits 2 Wheel Drive Models. 1988-98 Chevy 1500 Truck. (Requires Front Spring Pocket Trimming/Cutting). Ekstensive Metal Works Rear 2-Link and Notch Kit. (2) 2600 airmaxxx Air Bags. (2) Maxtrac Mono-Tube Gas Shocks.

C10 Complete Airmaxx Air Ride Suspension Kit Front Rear Ekstensive 2 link

November 15, 2023 admin

C10 Complete Airmaxx Air Ride Suspension Kit Front Rear Ekstensive 2 link

This Kit Has Everything! Plug and Play, All Wiring, Fuses, Hose, Fittings, Filters. Gauges To Monitor All Four Air Bag Pressure. Great Kit For Your C10 Or Custom Build Using an C10 Chassis. Valve Manifolds Use Less Fittings, Easier and Cleaner Install. Check Out In Stock Air Ride Kits or Message Us With Questions! Fits 2 Wheel Drive Models. Upgrades Available Message Us!! Airmaxxx Front Bolt On Air Bag Cups. Ekstensive Metal Works Rear Weld On 2-Link. (4) – airmaxxx 2600 air ride suspension bags. Airmaxxx 3/8 Valve Manifold. Airmaxxx 9ft Controller to Valve Harness. Airmaxxx 7 Switch Controller. Airmaxxx Chrome 480 Dual Air Compressors. 150 on – 180 off Pressure Switch. Airmaxxx 5 Gallon 7 Port Steel Air Tank. 50ft 3/8 DOT Air Hose. 20ft 1/4 DOT Air Hose (gauges). Nickle Plated Brass Camozzi PTC Fitting Kit. Airmaxxx 3/8 Water Traps. (2) 3/8 Element Filter. Air Hose Cutter &. (2) Dual Needle White Face Air Gauges. Rear 2-link Kit: The notch comes one piece and slips over the frame then welds on. It has the upper shock mounts already welded to the crossbars. After installing the notch cut the frame and the box in the bottoms with the filler pieces we provide and your truck is notched. Install the 2 link bars on your factory hangers and bolt them to the rear end with the u-bolt kit we provide. The bars already have the lower bag mounts and lower shock mounts already installed. The upper bags mounts are placed over the 2 link bag mounts then you weld it on and the bag mounts are done. Last thing is the pan hard bar. The notch already has the frame mount so you bolt it to the notch and weld on the axle mount and the suspension is ready for air bags.

C10 Complete Fast Air Ride Suspension Kit Front Spindles Rear Ekstensive 2 link

November 2, 2023 admin

C10 Complete Fast Air Ride Suspension Kit Front Spindles Rear Ekstensive 2 link

THIS KIT IS A FASTBAG Kit. This Kit Has Everything! Plug and Play, All Wiring, Fuses, Hose, Fittings, Filters. Gauges To Monitor All Four Air Bag Pressure. Great Kit For Your C10 Or Custom Build Using an C10 Chassis. Valve Manifolds Use Less Fittings, Easier and Cleaner Install. Check Out In Stock Air Ride Kits or Message Us With Questions! Fits 2 Wheel Drive Models. Upgrades Available Message Us!! Airmaxxx Front Bolt On Air Bag Cups. Airmaxxx Rear Weld On Air Bag Mounts. Maxtrac Suspension Front Spindles for 1.25 Rotor. Ekstensive Metal Works Rear Weld On 2-Link. (4) – airmaxxx 2600 air ride suspension bags. Airmaxxx 3/8 FAST VALVES. Airmaxxx 9ft Controller to Valve Harness. Airmaxxx 7 Switch Controller. Airmaxxx Chrome 480 Dual Air Compressors. 150 on – 180 off Pressure Switch. Airmaxxx 5 Gallon 9 Port Steel Air Tank. 50ft 3/8 DOT Air Hose. 40ft 1/4 DOT Air Hose (gauges). Nickle Plated Brass Camozzi PTC Fitting Kit. Airmaxxx 3/8 Water Traps. (2) 3/8 Element Filter. Air Hose Cutter &. (2) Dual Needle White Face Air Gauges. Rear 2-link Kit: The notch comes one piece and slips over the frame then welds on. It has the upper shock mounts already welded to the crossbars. After installing the notch cut the frame and the box in the bottoms with the filler pieces we provide and your truck is notched. Install the 2 link bars on your factory hangers and bolt them to the rear end with the u-bolt kit we provide. The bars already have the lower bag mounts and lower shock mounts already installed. The upper bags mounts are placed over the 2 link bag mounts then you weld it on and the bag mounts are done. Last thing is the pan hard bar. The notch already has the frame mount so you bolt it to the notch and weld on the axle mount and the suspension is ready for air bags.

Air Bag Kit

ekstensive