1965-1972 Mercedes W108 Front Air Bag Mounting Bracket Set Airbag Kit

July 6, 2021 admin

1965-1972 Mercedes W108 Front Air Bag Mounting Bracket Set Airbag Kit

Some vehicles were just born to be’bagged. The W108 Mercedes platform is definitely one of those vehicles! Coil springs at all four corners, with shocks already outboard of the coils front and rear, and they look INCREDIBLE sitting down low on stock wheels with skinny whitewalls! These airbag brackets will help you get your Benz sitting nice and low without a ton of fabrication. You’ll still have to trim a bit here and there, but the heavy lifting is already done for you. Combine these with a pair of Slam Specialties 5 bags and you’re set! Our kit comes in raw steel, and includes mounting hardware and installation instructions. The item “1965-1972 Mercedes W108 Front Air Bag Mounting Bracket Set Airbag Kit” is in sale since Wednesday, June 22, 2016. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Suspension & Steering\Lower Kits & Parts”. The seller is “bc_fab” and is located in Rancho Cordova, California. This item can be shipped worldwide.

Brand: BC Fabrication
Manufacturer Part Number: FB600F
Placement on Vehicle: Front
Warranty: 90 Day
Surface Finish: Raw steel
Country of Manufacture: United States
Country/Region of Manufacture: United States
OE Spec or Performance/Custom: Performance/Custom
Kit or Single Part: Kit

3/8 Front Rear Air Ride Suspension Bag Bracket Kit For 1965-70 Impala Caprice

June 21, 2021 admin

3/8 Front Rear Air Ride Suspension Bag Bracket Kit For 1965-70 Impala Caprice

1965-70 GM Cars Front & Rear Air Ride Suspension. Air Bags Mounting Brackets and Manual Inflation Kit. Just Add Air Management. To see Air Management Options. Airmaxxx Front Bolt In Cups Upper and Lower Mounts. Bolt In Cups Upper and Lower Mounts. Two – Aimaxxx 2500 1/2 Port Air Bags. Two – Aimaxxx 2600 1/2 Port Air Bags. 20ft 3/8 DOT Air Hose. Nickle Plated Brass PTC Fitting Kit. Two 3/8 Schrader Valves (manual inflation). Kit Recommended For The Best Ride. The right to make changes in design or add to or improve on product without incurring any obligations to install the same on products previously manufactured is expressly reserved. All parts are aftermarket replacement parts. Unless specifically noted, no implication is made that these parts are the original car manufacturers’, are from the original suppliers, or are approved by them. Always utilize safety restrain systems while operating vehicle. Billet Adapters are intended to be used ONLY on a show vehicle, stylized for a special look and NOT intended to be used on long driving, freeway driving and every day driving. Under no circumstances will Phx Wheel Inc. Be liable to any party for any direct, indirect, special, incidental, consequential, or other damages based on any improper use.. It is up to the user and/or installer to determine fitness for any other application. Many of our products require fabrication skills to install and should only be installed by a qualified fabricator or mechanic. Product must be unused and in original boxes and packaging material. Or without a RA# will be refused. No claims will be accepted on parts that have been modified in any way. It is also the responsibility of the person installing any component or kit to determine the suitability of the components or kit for that particular application. Products are intended for off road and show use only. Always check with your local authorities for highway laws in your area because highway laws and the enforcement of those laws vary widely. The item “3/8 Front Rear Air Ride Suspension Bag Bracket Kit For 1965-70 Impala Caprice” is in sale since Wednesday, August 19, 2020. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Suspension & Steering\Lower Kits & Parts”. The seller is “airslamit” and is located in Mesa, Arizona. This item can be shipped worldwide.

Custom Bundle: Yes
Interchange Part Number: Front Rear airride system bundle
Adjustable: Yes
Manufacturer Part Number: K-BB-IMP65FR-2526-HF
Part Type: Suspension Lowering Hardware Kit
Included Hardware: Air Bag
Placement on Vehicle: Left
Brand: Airmaxxx
Fitment Type: Performance/Custom
Warranty: Unspecified Length
Bundle Description: Air Fittings, Inflation Valve (schrader), Front Mounting Brackets, Rear Mounting Brackets, Air Bag, Mounting Hardware, DOT Air Hose . Nickle Plated Brass Fittings

1999-06 Chevy C15 3/8 Front Rear Air Ride Suspension Bag Bracket Mount Kit

May 21, 2021 admin

1999-06 Chevy C15 3/8 Front Rear Air Ride Suspension Bag Bracket Mount Kit

2600 Air Bags Mounting Brackets and Manual Inflation Kit. Just Add Air Management. To see Air Management Options. Airmaxxx Front Bolt In Cups Upper and Lower Mounts. Airmaxxx Rear Weld on Air Bag Mounts. Four – Aimaxxx 2600 1/2 Port Air Bags. 20ft 3/8 DOT Air Hose. Nickle Plated Brass PTC Fitting Kit. Two 3/8 Schrader Valves (manual inflation). The right to make changes in design or add to or improve on product without incurring any obligations to install the same on products previously manufactured is expressly reserved. All parts are aftermarket replacement parts. Unless specifically noted, no implication is made that these parts are the original car manufacturers’, are from the original suppliers, or are approved by them. Always utilize safety restrain systems while operating vehicle. Billet Adapters are intended to be used ONLY on a show vehicle, stylized for a special look and NOT intended to be used on long driving, freeway driving and every day driving. Under no circumstances will Phx Wheel Inc. Be liable to any party for any direct, indirect, special, incidental, consequential, or other damages based on any improper use.. It is up to the user and/or installer to determine fitness for any other application. Many of our products require fabrication skills to install and should only be installed by a qualified fabricator or mechanic. Product must be unused and in original boxes and packaging material. Or without a RA# will be refused. No claims will be accepted on parts that have been modified in any way. It is also the responsibility of the person installing any component or kit to determine the suitability of the components or kit for that particular application. Products are intended for off road and show use only. Always check with your local authorities for highway laws in your area because highway laws and the enforcement of those laws vary widely. The item “1999-06 Chevy C15 3/8 Front Rear Air Ride Suspension Bag Bracket Mount Kit” is in sale since Tuesday, August 18, 2020. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Suspension & Steering\Lower Kits & Parts”. The seller is “airslamit” and is located in Mesa, Arizona. This item can be shipped worldwide.

Custom Bundle: No
Interchange Part Number: 4link,4-link,air suspension,air ride,ride,tech
Adjustable: Yes
Manufacturer Part Number: K-BB-GM99FR-HF
Included Hardware: Air Fittings
Placement on Vehicle: Left
Other Part Number: adjustable suspension
Brand: Airslamit Airmaxxx
Fitment Type: Performance/Custom
Warranty: Lifetime

Rear Triangulated Four Link Bolt On Axle Air Ride Bracket Kit 2600lb Bags FOR GM

May 2, 2021 admin

Rear Triangulated Four Link Bolt On Axle Air Ride Bracket Kit 2600lb Bags FOR GM

Johnny Law Motors brings you the vey best in aftermarket and OEM car and truck parts and accessories. We offer a HUGE selection of the top brand products at the lowest prices. The only thing that beats our low prices is our great customer service. We are here to help you build your ride with the best parts and service in the industry. Rear Triangulated Four Link Bolt On Axle Air Ride Bracket Kit 2600lb Bags FOR GM. Reference part number: JLM 9BEC7. Includes a pair of adjustable rear 3 inch axle air bag brackets with hardware. Made of heavy duty 3/16 inch steel then black oil soaked with an anti-rust coating, these brackets are designed for performance. Mounts over or under your axle. Bolts on to frame and welds onto axle. Includes 2 axle brackets, 2 upper bag brackets, 2 lower bag brackets, 16 grade 8 bolts & nuts, 2 2600 lb bags, 50 air line & 2 elbow fittings PLUS Johnny Law Motors Triangulated Full Size Universal Four Link Kit. Putting a lot of horsepower through your rear end? Johnny Law Motorss New Heavy Duty Universal Triangulated 4-Link Kit is stronger than the rest! 156 wall tubing that is the standard in drag racing applications, Johnny Law Motorss full-sized 4-link kit will remain straight and perfectly aligned under even the most demanding applications. Johnny Law Motorss adjustable 4-link features extra long 28 inch main bars and 18 inch secondary bars to provide you with the maximum in suspension travel and adjustability. Brass sleeved bushings guarantee a lifetime of squeak-free operation. Completely TIG welded for maximum strength. All mounts are cut from 3/16 plate. Special infinitely adjustable CNC machined threaded rod ends are thicker than usual and thread over 2.5 inches into the 4-link tubes for both strength and adjustability. Fully plated mounting hardware included. Stay ahead of the pack with Johnny Law Motors Suspension. Material :: Steel Finish :: Black Oil Soak Anti Rust Coating :: Yes Thickness :: 3/16 Axle Bracket :: 2 Upper Bag Bracket :: 2 Lower Bag Bracket :: 2 Hardware :: 16 Bolts & Nuts Included Hardware Grade :: Grade 8 Axle :: 3 Axles Adjustable :: 3 Mount :: Over or Under Axle Includes :: 50 3/8 Air Line Includes :: 2 Elbow Fittings Includes :: 2 2600lb Air Bags Feature :: Heavy Duty Triangulated Full Size Universal Main Bar :: 28 (711mm) Long Secondary Bar :: 18 (457mm) Long Bar Wall Thickness :: 4.1mm Heavy Duty Bushings :: YES Coil Over Brackets Positions :: 3 Coil Over Brackets :: YES Adjustable :: YES Bar Thickness :: 25mm Brackets Thickness :: 5mm Brackets :: Included Install Hardware :: YES Number Of Bars :: 4 Bushing Included :: YES Shock Hardware :: YES Hardware :: YES Axle :: 3 & 2 3/4. If you are purchasing multiple items, please pay for all items at the same time. All items must be in original condition including the packaging. Some items may have defects, but will still work for the application, unless otherwise stated as inoperable. An example is shift knobs which were molded slightly oblong, or dont seat squarely at a 90 degree angle to the shift rod. We made every effort to document every last imperfection, but we may have missed something. That said, I personally sealed the last hundred, and I recall about 3 missing it. We have since found more, so just let us know! The item “Rear Triangulated Four Link Bolt On Axle Air Ride Bracket Kit 2600lb Bags FOR GM” is in sale since Saturday, June 1, 2019. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Suspension & Steering\Other”. The seller is “johnnylawmotorsonline” and is located in Portland, Oregon. This item can be shipped worldwide.

MPN: JLM9BEC7
Brand: Johnny Law Motors

2005-2010 300/Magnum/Charger/ Challenger Air Bags & Bracket kit Air Ride Bags

April 15, 2021 admin

2005-2010 300/Magnum/Charger/ Challenger Air Bags & Bracket kit Air Ride Bags

Add to Favorite Sellers. AIR GAUGES & GAUGE PANELS. COMPLETE AIR RIDE KITS. COMPLETE BRACKET & BAGS KITS. FITTINGS & FLOW CONTROLS. ONBOARD & AIR SOURCE KITS. SWITCHES & SWITCH BOXES. 1832 Lone Star Rd, Mansfield, TX 76063. This kit includes front billet brackets (both left and right sides) CNC Machined to give un parallel performance. These front brackets will install on your existing factory struts to give you a smooth turning of your steering wheel while maintaining the proper height drop. These brackets will come with all required hardware to install the bags and brackets on front. Rear cups are designed for Universal Air Suspension “Airhouse 1″ bags to give you a desired lift and drop without affecting the performance. These rear brackets are bolt on type so there is no welding or cutting required. Following items are included in this listing. A Pair of Front CNC Machined Billet Brackets, Hardware. A pair of Rear Bag Brackets, Hardware. Two Aero Sport Bags (Front). 2 Airhouse1 Bags with 3/8 Single Port. Front Bag Specifications & Details. Designed for to slip over your Factory/Performance Struts. (Pressure tube must be less then 2.14 in Diameter). Bags made from Synthetic rubber to be resistant against Oil and breakdown that will ruin Natural Rubber. Available ONLY in 1/4 NPT Ports MADE IN THE USA! Rear Bag Specifications & Details. Single Convoluted Air Spring. These will work with rear bolt on bag brackets for charger, Magnum, Chrysler, 300C, 300, SRT8 as well as AWD upto 22 Rims. WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. In all 50 States in USA. Newmatics Inc is a family owned company, established in 2008. We are authorized dealer for all major Air Suspension companies in USA. We sell only major brand name authentic, 100% genuine parts. We are located at 1832 Lone Star Rd, Mansfield, TX 76063. We will answer your question or concern within 24 hours. International Customers (including Mexico & Canada) – Please Note. We cannot under-value merchandise or mark the items as a gift on custom forms & Invoices. This is against US and international laws. Please make sure, your address information is correct and up to date. All return items must be authorized and approved by us. Your feedback is very important for us. We will definitely resolve it. You can leave us a voice message, someone from our staff will get back to you same day or within 24 hours regarding the help and assistance needed. The item “2005-2010 300/Magnum/Charger/ Challenger Air Bags & Bracket kit Air Ride Bags” is in sale since Wednesday, January 30, 2013. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Suspension & Steering\Lower Kits & Parts”. The seller is “newmatics” and is located in Mansfield, Texas. This item can be shipped worldwide.

Surface Finish: BLACK
Part Brand: UNiversal Air Suspension
UPC: Does Not Apply
Country/Region of Manufacture: United States
California Prop 65 Warning: WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Manufacturer Part Number: 02-ST-SB-14, 02-2500
Placement on Vehicle: Left
Brand: Universal Air
Warranty: 6 Month

Torsion Bar Import 3/8 Front Rear Air Ride Suspension Bag Bracket Mount Kit

March 9, 2021 admin

Torsion Bar Import 3/8 Front Rear Air Ride Suspension Bag Bracket Mount Kit

Import Torsion Bar Mini Trucks. Front & Rear Air Ride Suspension. Air Bags Mounting Brackets and Manual Inflation Kit. Just Add Air Management. To see Air Management Options. Airmaxxx Front Weld In 3/16 Mounts. Airmaxxx Rear 3/16 Over the Axle. Four – Aimaxxx 2500 1/2 Port Air Bags. 20ft 3/8 DOT Air Hose. Nickle Plated Brass PTC Fitting Kit. Two 3/8 Schrader Valves (manual inflation). Kit Recommended For The Best Ride. The right to make changes in design or add to or improve on product without incurring any obligations to install the same on products previously manufactured is expressly reserved. All parts are aftermarket replacement parts. Unless specifically noted, no implication is made that these parts are the original car manufacturers’, are from the original suppliers, or are approved by them. Always utilize safety restrain systems while operating vehicle. Billet Adapters are intended to be used ONLY on a show vehicle, stylized for a special look and NOT intended to be used on long driving, freeway driving and every day driving. Under no circumstances will Phx Wheel Inc. Be liable to any party for any direct, indirect, special, incidental, consequential, or other damages based on any improper use.. It is up to the user and/or installer to determine fitness for any other application. Many of our products require fabrication skills to install and should only be installed by a qualified fabricator or mechanic. Product must be unused and in original boxes and packaging material. Or without a RA# will be refused. No claims will be accepted on parts that have been modified in any way. It is also the responsibility of the person installing any component or kit to determine the suitability of the components or kit for that particular application. Products are intended for off road and show use only. Always check with your local authorities for highway laws in your area because highway laws and the enforcement of those laws vary widely. The item “Torsion Bar Import 3/8 Front Rear Air Ride Suspension Bag Bracket Mount Kit” is in sale since Thursday, August 20, 2020. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Suspension & Steering\Lower Kits & Parts”. The seller is “airslamit” and is located in Mesa, Arizona. This item can be shipped worldwide.

Custom Bundle: Yes
Interchange Part Number: Front Rear airride system bundle
Adjustable: Yes
Manufacturer Part Number: K-BB-TORFR-25-HF
Part Type: Suspension Lowering Hardware Kit
Included Hardware: Air Bag
Placement on Vehicle: Left
Brand: Airmaxxx
Fitment Type: Performance/Custom
Warranty: Unspecified Length
Bundle Description: Air Fittings, Inflation Valve (schrader), Front Mounting Brackets, Rear Mounting Brackets, Air Bag, Mounting Hardware, DOT Air Hose . Nickle Plated Brass Fittings

71-96 Chevy B-Body 3/8 Front Rear Air Ride Suspension Bag Bracket Mount Kit

March 8, 2021 admin

71-96 Chevy B-Body 3/8 Front Rear Air Ride Suspension Bag Bracket Mount Kit

1971-96 Chevy B-Body Cars Front & Rear Air Ride Suspension. 2600 Air Bags Mounting Brackets and Manual Inflation Kit. Just Add Air Management. To see Air Management Options. Airmaxxx Front Bolt In Cups Upper and Lower Mounts. Bolt In Cups Upper and Lower Mounts. Four – Aimaxxx 2600 1/2 Port Air Bags. 20ft 3/8 DOT Air Hose. Nickle Plated Brass PTC Fitting Kit. Two 3/8 Schrader Valves (manual inflation). Kit Recommended For The Best Ride. The right to make changes in design or add to or improve on product without incurring any obligations to install the same on products previously manufactured is expressly reserved. All parts are aftermarket replacement parts. Unless specifically noted, no implication is made that these parts are the original car manufacturers’, are from the original suppliers, or are approved by them. Always utilize safety restrain systems while operating vehicle. Billet Adapters are intended to be used ONLY on a show vehicle, stylized for a special look and NOT intended to be used on long driving, freeway driving and every day driving. Under no circumstances will Phx Wheel Inc. Be liable to any party for any direct, indirect, special, incidental, consequential, or other damages based on any improper use.. It is up to the user and/or installer to determine fitness for any other application. Many of our products require fabrication skills to install and should only be installed by a qualified fabricator or mechanic. Product must be unused and in original boxes and packaging material. Or without a RA# will be refused. No claims will be accepted on parts that have been modified in any way. It is also the responsibility of the person installing any component or kit to determine the suitability of the components or kit for that particular application. Products are intended for off road and show use only. Always check with your local authorities for highway laws in your area because highway laws and the enforcement of those laws vary widely. The item “71-96 Chevy B-Body 3/8 Front Rear Air Ride Suspension Bag Bracket Mount Kit” is in sale since Wednesday, August 19, 2020. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Suspension & Steering\Lower Kits & Parts”. The seller is “airslamit” and is located in Mesa, Arizona. This item can be shipped worldwide.

Custom Bundle: Yes
Interchange Part Number: airride suspension system Complete
Adjustable: Yes
Manufacturer Part Number: K-BB-BBDYFR-HF
Part Type: Suspension Lowering Hardware Kit
Included Hardware: Air Bag
Placement on Vehicle: Left
Brand: Airmaxxx
Fitment Type: Performance/Custom
Warranty: Unspecified Length
Bundle Description: Air Fittings, Inflation Valve (schrader), Front Mounting Brackets, Rear Mounting Brackets, Air Bag, Mounting Hardware, DOT Air Hose . Nickle Plated Brass Fittings

Front Shocks Relocator Kit Universal Weld On Shock Mount Bracket & Hardware

February 24, 2021 admin

Front Shocks Relocator Kit Universal Weld On Shock Mount Bracket & Hardware

Universal Front Shock Relocation Kit With Shocks and Hardware. Allows for re-location of front shocks to the outside of the control arm when replacing from coil spring or torsion with air bags. The right to make changes in design or add to or improve on product without incurring any obligations to install the same on products previously manufactured is expressly reserved. All parts are aftermarket replacement parts. Unless specifically noted, no implication is made that these parts are the original car manufacturers’, are from the original suppliers, or are approved by them. Always utilize safety restrain systems while operating vehicle. Billet Adapters are intended to be used ONLY on a show vehicle, stylized for a special look and NOT intended to be used on long driving, freeway driving and every day driving. Under no circumstances will Phx Wheel Inc. Be liable to any party for any direct, indirect, special, incidental, consequential, or other damages based on any improper use.. It is up to the user and/or installer to determine fitness for any other application. Many of our products require fabrication skills to install and should only be installed by a qualified fabricator or mechanic. Product must be unused and in original boxes and packaging material. Or without a RA# will be refused. No claims will be accepted on parts that have been modified in any way. It is also the responsibility of the person installing any component or kit to determine the suitability of the components or kit for that particular application. Products are intended for off road and show use only. Always check with your local authorities for highway laws in your area because highway laws and the enforcement of those laws vary widely. The item “Front Shocks Relocator Kit Universal Weld On Shock Mount Bracket & Hardware” is in sale since Thursday, November 14, 2019. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Suspension & Steering\Shocks & Struts”. The seller is “wheelsnparts” and is located in Mesa, Arizona. This item can be shipped worldwide.

Interchange Part Number: upper tab relocation,air,ride,custom,suspension
Adjustable: Yes
Manufacturer Part Number: SHO-REL-FT
Part Type: Shock Mount Bracket
Included Hardware: Shock
Bundle Listing: Yes
Fit for: Universal
Type: Universal
Kit Parts Included: Shock
Connection Type: Weld-on
Placement on Vehicle: Left
Other Part Number: relocate shocks after air bag install
Brand: Weld Mount
Fitment Type: Performance/Custom
Warranty: 1 Year

82-88 Chevy G-Body 3/8 Front Rear Air Ride Suspension Bag Bracket Mount Kit

February 1, 2021 admin

82-88 Chevy G-Body 3/8 Front Rear Air Ride Suspension Bag Bracket Mount Kit

G-Body Front & Rear Air Ride Suspension. 2600 Air Bags Mounting Brackets and Manual Inflation Kit. Just Add Air Management. To see Air Management Options. Airmaxxx Front Bolt In Cups Upper and Lower Cups. Bolt In Cups Upper and Lower Cups. Four – Aimaxxx 2500 1/2 Port Air Bags. 20ft 3/8 DOT Air Hose. Nickle Plated Brass PTC Fitting Kit. Two 3/8 Schrader Valves (manual inflation). Kit Recommended For The Best Ride. The right to make changes in design or add to or improve on product without incurring any obligations to install the same on products previously manufactured is expressly reserved. All parts are aftermarket replacement parts. Unless specifically noted, no implication is made that these parts are the original car manufacturers’, are from the original suppliers, or are approved by them. Always utilize safety restrain systems while operating vehicle. Billet Adapters are intended to be used ONLY on a show vehicle, stylized for a special look and NOT intended to be used on long driving, freeway driving and every day driving. Under no circumstances will Phx Wheel Inc. Be liable to any party for any direct, indirect, special, incidental, consequential, or other damages based on any improper use.. It is up to the user and/or installer to determine fitness for any other application. Many of our products require fabrication skills to install and should only be installed by a qualified fabricator or mechanic. Product must be unused and in original boxes and packaging material. Or without a RA# will be refused. No claims will be accepted on parts that have been modified in any way. It is also the responsibility of the person installing any component or kit to determine the suitability of the components or kit for that particular application. Products are intended for off road and show use only. Always check with your local authorities for highway laws in your area because highway laws and the enforcement of those laws vary widely. The item “82-88 Chevy G-Body 3/8 Front Rear Air Ride Suspension Bag Bracket Mount Kit” is in sale since Wednesday, August 19, 2020. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Suspension & Steering\Lower Kits & Parts”. The seller is “airslamit” and is located in Mesa, Arizona. This item can be shipped worldwide.

Custom Bundle: Yes
Fitment Type: Performance/Custom
Adjustable: Yes
Bundle Description: Air Fittings, Inflation Valve (schrader), Front Mounting Brackets, Rear Mounting Brackets, Air Bag, Mounting Hardware, DOT Air Hose . Nickle Plated Brass Fittings
Included Hardware: Mounting Hardware
Interchange Part Number: airride suspension system Complete
Placement on Vehicle: Left
Manufacturer Part Number: K-BB-BBDYFR-HF
Brand: Airmaxxx
Warranty: Unspecified Length
Part Type: Suspension Lowering Hardware Kit

TC Bros. Dual Bag Air Ride Solo Seat Bracket Kit Harley Davidson chopper bobber

January 26, 2021 admin

TC Bros. Dual Bag Air Ride Solo Seat Bracket Kit Harley Davidson chopper bobber

Dual Bag Air Ride Solo Seat Kit. Powdercoated top mount with slotted holes for many solo seats. Coped mild steel lower mount for easy welding. Standard schrader fill valve for easy pressure adjustments. Up to 325lb rider capacity. This kit provides the ultimate in comfort, vibration dampening, and adjustability for your hardtailed chopper or bobber. Dual compact rubber air. Springs offer far superior vibration dampening as compared to traditional seat springs or shocks with virtually unlimited adjustability. The air springs use a bicycle style schrader fill valve that allow the rider to easily inflate each air spring from 1psi-75psi depending on. Rider weight and desired firmness. Most riders prefer a 5psi-25psi operating pressure for maximum comfort. This Air Ride Solo Seat. Bracket Kit gives you a 2.1″ length of travel that is very comparable to a set of 3″ seat springs but with better vibration damping due. To the fact that there is no “metal on metal” contact at the rear of the seat to transfer vibration to the rider. Slotted mounting holes on the heavy duty 1/4 thick steel seat bracket allows universal fitment on almost any solo seat that has threaded. Spring studs ranging from 6.5in-7.5in center to center spacing. The seat bracket is powdercoated black for durability while the weld-on. Frame mounting bracket is formed from one piece of steel for ultimate strength and easy installation. The frame mounting bracket is coped. For perfect fitment on 1 1/8″ diameter frame tubing but can easily fit 1″ or 1 1/4 crossmembers as well. The frame bracket is raw finished. Mild steel for easy welding. Put more miles on your hardtailed chopper or bobber with this Air Ride Kit! The item “TC Bros. Dual Bag Air Ride Solo Seat Bracket Kit Harley Davidson chopper bobber” is in sale since Monday, January 13, 2020. This item is in the category “eBay Motors\Parts & Accessories\Motorcycle Parts\Seats & Seat Parts\Other Seat Parts”. The seller is “hogridin” and is located in Daytona Beach, Florida. This item can be shipped worldwide.

Primary Color: Black
Type: driver seat shock
Warranty: No Warranty
Brand: TC Bros
Manufacturer Part Number: 106-0022
MPN: 1060022

January 2025
M	T	W	T	F	S	S
« Dec
		1	2	3	4	5
6	7	8	9	10	11	12
13	14	15	16	17	18	19
20	21	22	23	24	25	26
27	28	29	30	31