airbag
1963-1965 Buick Riviera Rear Airbag Bracket Set Free Shipping BC Fab
Make bagging your old school easy with these bolt on airbag brackets! Designed for 6 airbags and to bolt directly in place of your factory coils. International orders are also welcome – Please check pricing before ordering. This item is in the category “eBay Motors\Parts & Accessories\Performance & Racing Parts\Auto Performance Parts\Chassis, Suspension & Brakes\Lower Kits & Parts”. The seller is “bc_fab” and is located in this country: US. This item can be shipped worldwide.
- Brand: BC Fabrication
- OE Spec or Performance/Custom: Performance/Custom
- Warranty: 90 Day
- Included Hardware: Airbag Bracket Set (Raw Finish)
- Placement on Vehicle: Front
- Manufacturer Part Number: FB515R
- Kit or Single Part: Kit
- Country/Region of Manufacture: United States
Complete Airbag Suspension Kit 2008-2015 Audi R8 LEVEL 3 BC Fab
The Audi R8 is a masterpiece, a truly daily-driving supercar. The whole vehicle screams “performance”, from the polished sleek exterior with arched body lines, to the powerful mid-engine, and the superior all wheel-drive. The only thing keeping this car from being absolutely perfect, is it’s ride height. So, Air Lift Performance stepped up their game and gave the R8 the slammed look this performance monster deserves. Front Strutbags: Air Lift Performance’s front strutbags kit features a drop of 78mm/3.1, compact double bellow air springs, and 30-level adjustable, threaded body, monotube shocks. Rear Strutbags: Air Lift Performance’s Rear strutbag kit features a drop of 71mm/2.8, compact double bellow air springs, and 30-level adjustable, threaded body, monotube shocks. AccuAir VU4 4-Way Valve Manifold: Compact design, easy installation, four corner independent control. Viair 380 Chrome Compressor Dual Pack: Includes (2) 200 PSI chrome air compressors, relays, pressure switch and more! 28 Seamless Aluminum Air Tank: The perfect size for your ride! This seamless aluminum air tank won’t corrode or rust, and it comes with mounting brackets for easy installation. 50′ Roll of 3/8 DOT Approved Air Line. Brass DOT Approved PUSH-CONNECT Air Fittings: No leaks or failures with these quality brass fittings! AVS 7 Switch Control Box: This handheld controller hides easily and fits nicely in the palm of your hand. 2011 Audi R8 Spyder. 2012 Audi R8 GT. 2015 Audi R8 Plus. Front: Does not use electronic damping control, reroute wire harness to prevent potential damage. Rear: Does not use electronic damping control. NOTE: If your vehicle has electronic damping, a delete module is required. Allow 7-14 days due to Air Lift Performance parts availability. This item is in the category “eBay Motors\Parts & Accessories\Performance & Racing Parts\Auto Performance Parts\Chassis, Suspension & Brakes\Lower Kits & Parts”. The seller is “bc_fab” and is located in this country: US. This item can be shipped worldwide.
- Country/Region of Manufacture: United States
- Manufacturer Part Number: BK618-3
- Included Hardware: Air Lift Performance Front Kit, Air Lift Performance Rear Kit, AccuAir VU4 Valve Manifold, Viair 380 Chrome Compressor Dual Pack, 28\
- Bundle Listing: Yes
- Placement on Vehicle: Left, Right, Front, Rear
- Brand: BC Fabrication
- Fitment Type: Performance/Custom
- Warranty: 90 Day
68-72 Datsun 521 Airbag Kit Stage 1 1/4 Manual Control 4 Path Air Ride System
If you’re shopping for a basic air management kit, this is just the ticket. Manual paddle valves are where the whole air ride scene started, and there are still cars and trucks from 20+ years ago running these things! You won’t be showing off your air ride at every stop light, but you’ll be able to easily set a ride height, drive, then drop down low when you park- clean and simple, and dead-reliable. Here’s what you get with our Stage 1 package. Slam Specialties RE6 front air bags – these front suspensions are tight for space, and these’bags fit perfectly. 4 path manual control panel. One switch per corner, and a pair of dual needle gauges to help you set your ride height, all mounted on a brushed stainless steel panel. Front and Rear Airbag Mounting Brackets. The front brackets weld to your frame, and the rears weld to the side of the notch and on top of your axle. 8-piece Weld-in Frame Notch Kit. This notch is big enough to lay 22 wheels, and is stronger than the section of frame it replaces. Viair 480C chrome air compressor. Big enough to keep your air tank filled up, small enough to work with your factory alternator and battery. 5 gallon aluminum air tank. The right size tank to fit under your bed, and enough air to lift you up without waiting. DOT-approved air line and fittings. We don’t cheap out on our plumbing. Only the highest-quality fittings and line to give you a leak-free system. Includes pressure switch, relay, 10 gauge wire for your air compressor, and 18 gauge wire for your pressure switch. All pre-wired and ready to install. Complete plumbing and wiring diagrams. We try to make your life easy, but if you have questions we’re always happy to help! We tailor each kit to include all of the fittings and wiring connections you’ll need. With this air suspension kit, you can expect your ride to lift or drop in about 6-8 seconds. On any car or truck with a leaf spring rear suspension, we always recommend replacing the leaf springs with a 4 link. This item is in the category “eBay Motors\Parts & Accessories\Performance & Racing Parts\Auto Performance Parts\Chassis, Suspension & Brakes\Lower Kits & Parts”. The seller is “twisted_images” and is located in this country: US. This item can be shipped worldwide.
- Brand: Twisted Images
- Manufacturer Part Number: KIT-131-1
- Warranty: Yes
88-95 Isuzu P’uP Minitruck Airbag Kit Air Lift 3P 4 Path Air Ride System
So, you want a fancy digital ride height controller, but you don’t wanna deal with ride height sensors? Air Lift Performance has you covered with their 3P system! Here’s what you get with our Stage 3 package. Slam Specialties SS6 front air bags – these front suspensions are tight for space, and these’bags fit perfectly. Air Lift Performance 3P control system. 4-path manifold, water separator, pressure relief valve, and a beautiful handheld controller to top it all off. Front and Rear Airbag Mounting Brackets. The front brackets weld to your frame, and the rears weld to the side of the notch and on top of your axle. 8-piece Weld-in Frame Notch Kit. This notch is big enough to lay 22 wheels, and is stronger than the section of frame it replaces. Viair 480C chrome air compressor. Big enough to keep your air tank filled up, small enough to work with your factory alternator and battery. 5 gallon aluminum air tank. The right size tank to fit under your bed, and enough air to lift you up without waiting. DOT-approved air line and fittings. We don’t cheap out on our plumbing. Only the highest-quality fittings and line to give you a leak-free system. Pre-wired for one of the easiest installations I’ve ever seen. Connect battery power and ground, ignition lead, and compressor wires, and that’s it! Complete plumbing and wiring diagrams. We try to make your life easy, but if you have questions we’re always happy to help! With a pressure-based system, you trade off some accuracy for simplicity. Air pressure isn’t always equal to height, so in some situations you’ll end up needing to manually adjust your vehicle to level it back out- like if you have the trunk/bed loaded down, a REALLY heavy passenger, etc. This is only common in extreme situations- for most day-to-day driving a pressure-based system will keep you rolling just fine. On any car or truck with a leaf spring rear suspension, we always recommend replacing the leaf springs with a 4 link. This item is in the category “eBay Motors\Parts & Accessories\Performance & Racing Parts\Auto Performance Parts\Chassis, Suspension & Brakes\Lower Kits & Parts”. The seller is “twisted_images” and is located in this country: US. This item can be shipped worldwide.
- Manufacturer Part Number: KIT-171-3
- Brand: Twisted Images
- Warranty: Yes
58-64 Impala Airbag Kit 1/2 Fast Air Electric System Viair 480C AVS Air Lift
Do you dream of hitting switches at every stop light? Want your wheels to come off the ground when you raise your ride? Want to scare old ladies when you let the air out of your’bags? This is probably the kit you want! 1/2″ valves, 1/2″ lines, 5 gallons of air with dual Viair 480C compressors. Made to lift or drop in under a second. Here’s everything that’s included. AVS 1/2″ Valves – 8 of these give you that “front, back, side-to-side action, and they give it to you NOW! 1/2 DOT-approved air line – 50 foot roll is enough to plumb the entire system. Brass DOT-approved PUSH-CONNECT fittings – we give you everything you’ll need to put this setup together with the valves mounted out at each corner where they belong. Viair 480C Dual Compressor Pack – these compressors will keep your system locked in at 200 psi, and ready to show off. 200 psi pressure switch. 5 Gallon aluminum air tank. AVS 7 switch handheld controller – with front, back, pancake, and individual controls, there’s nothing you won’t be able to do. Complete wiring kit – pre-wired to run up to your battery and back to your air compressors, this package will save you countless trips to the parts store during installation. Air Lift Dominator front and rear air bags- made to handle up to 600 psi of pressure! Front and rear bolt-on mounting brackets- designed to fit your 58-64 directly with no fabrication required. We tailor each kit to include all of the fittings and wiring connections you’ll need. This item is in the category “eBay Motors\Parts & Accessories\Performance & Racing Parts\Auto Performance Parts\Chassis, Suspension & Brakes\Lower Kits & Parts”. The seller is “twisted_images” and is located in this country: US. This item can be shipped worldwide.
- Manufacturer Part Number: KIT-510-FAST
- Brand: Twisted Images
- Warranty: Yes
Dodge Ram Airbag Kit Stage 1 1/4 Manual Control 4 Path Air Ride System
If you’re shopping for a basic air management kit, this is just the ticket. Manual paddle valves are where the whole air ride scene started, and there are still cars and trucks from 20+ years ago running these things! You won’t be showing off your air ride at every stop light, but you’ll be able to easily set a ride height, drive, then drop down low when you park- clean and simple, and dead-reliable. Here’s what you get with our Stage 1 package. 4 path manual control panel. One switch per corner, and a pair of dual needle gauges to help you set your ride height, all mounted on a brushed stainless steel panel. Front and Rear Airbag Mounting Brackets. The front brackets mount directly in place of your coil springs, and the rears weld to the side of the notch and on top of your axle. 8-piece Weld-in Frame Notch Kit. This notch is big enough to lay 22 wheels, and is stronger than the section of frame it replaces. Viair 480C chrome air compressor. Big enough to keep your air tank filled up, small enough to work with your factory alternator and battery. 5 gallon polished aluminum air tank. The right size tank to fit under your bed, and enough air to lift you up without waiting. DOT-approved air line and fittings. We don’t cheap out on our plumbing. Only the highest-quality fittings and line to give you a leak-free system. Includes pressure switch, relay, 10 gauge wire for your air compressor, and 18 gauge wire for your pressure switch. All pre-wired and ready to install. Complete plumbing and wiring diagrams. We try to make your life easy, but if you have questions we’re always happy to help! We tailor each kit to include all of the fittings and wiring connections you’ll need. With this air suspension kit, you can expect your ride to lift or drop in about 6-8 seconds. On any car or truck with a leaf spring rear suspension, we always recommend replacing the leaf springs with a 4 link. This item is in the category “eBay Motors\Parts & Accessories\Performance & Racing Parts\Auto Performance Parts\Chassis, Suspension & Brakes\Lower Kits & Parts”. The seller is “twisted_images” and is located in this country: US. This item can be shipped worldwide.
- Manufacturer Part Number: KIT-136-1
- Brand: Twisted Images
- Warranty: Yes