73-87 C10 C20 Airbag Kit Stage 2 3/8 Electric Manifold 4 Path Air Ride

73-87 C10 C20 Airbag Kit Stage 2 3/8 Electric Manifold 4 Path Air Ride
73-87 C10 C20 Airbag Kit Stage 2 3/8 Electric Manifold 4 Path Air Ride
73-87 C10 C20 Airbag Kit Stage 2 3/8 Electric Manifold 4 Path Air Ride
73-87 C10 C20 Airbag Kit Stage 2 3/8 Electric Manifold 4 Path Air Ride
73-87 C10 C20 Airbag Kit Stage 2 3/8 Electric Manifold 4 Path Air Ride
73-87 C10 C20 Airbag Kit Stage 2 3/8 Electric Manifold 4 Path Air Ride
73-87 C10 C20 Airbag Kit Stage 2 3/8 Electric Manifold 4 Path Air Ride
73-87 C10 C20 Airbag Kit Stage 2 3/8 Electric Manifold 4 Path Air Ride
73-87 C10 C20 Airbag Kit Stage 2 3/8 Electric Manifold 4 Path Air Ride
73-87 C10 C20 Airbag Kit Stage 2 3/8 Electric Manifold 4 Path Air Ride

73-87 C10 C20 Airbag Kit Stage 2 3/8 Electric Manifold 4 Path Air Ride
Looking for a simple air management package that will get you off the ground without filling up your bed? Our Stage 2 system just might be the ticket! Designed to be as compact as possible, so you can hide the components under the bed of your truck, with a simple handheld switch box to allow you control over all four corners of your ride. Here’s what you get with our Stage 2 package. AVS 4-path valve manifold! – Both are compact, reliable, and come with all of the wiring and fittings required for installation. Front and Rear Airbag Mounting Brackets. The front brackets bolt directly in place of your coil springs, and the rears weld to the side of the notch and on top of your axle. 8-piece Weld-in Frame Notch Kit. This notch is big enough to lay 22 wheels, and is stronger than the section of frame it replaces. Viair 480C chrome air compressor. Big enough to keep your air tank filled up, small enough to work with your factory alternator and battery. 5 gallon aluminum air tank. The right size tank to fit under your bed, and enough air to lift you up without waiting. AVS 7-switch handheld controller. This switch box gives you control over all four corners independently, along with front, back, and “pancake” features. DOT-approved air line and fittings. We don’t cheap out on our plumbing. Only the highest-quality fittings and line to give you a leak-free system. Includes pressure switch, relay, 10 gauge wire for your air compressor, 18 gauge wire for your pressure switch, and a harness to connect your switch box to your manifold. All pre-wired and ready to install. Complete plumbing and wiring diagrams. We try to make your life easy, but if you have questions we’re always happy to help! We tailor each kit to include all of the fittings and wiring connections you’ll need. With this air management package, you can expect your ride to lift or drop in about 2-3 seconds. On any car or truck with a leaf spring rear suspension, we always recommend replacing the leaf springs with a 4 link. The item “73-87 C10 C20 Airbag Kit Stage 2 3/8 Electric Manifold 4 Path Air Ride” is in sale since Wednesday, March 17, 2021. This item is in the category “eBay Motors\Parts & Accessories\Performance & Racing Parts\Auto Performance Parts\Chassis, Suspension & Brakes\Lower Kits & Parts”. The seller is “twisted_images” and is located in El Reno, Oklahoma. This item can be shipped worldwide.
  • Manufacturer Part Number: KIT-108-2
  • Brand: Twisted Images
  • Warranty: Yes

73-87 C10 C20 Airbag Kit Stage 2 3/8 Electric Manifold 4 Path Air Ride

Airmaxxx Front Rear Weld On Kit Notch Parallel 4 Link & Bags For 73-87 Chevy C10

Airmaxxx Front Rear Weld On Kit Notch Parallel 4 Link & Bags For 73-87 Chevy C10
Airmaxxx Front Rear Weld On Kit Notch Parallel 4 Link & Bags For 73-87 Chevy C10
Airmaxxx Front Rear Weld On Kit Notch Parallel 4 Link & Bags For 73-87 Chevy C10
Airmaxxx Front Rear Weld On Kit Notch Parallel 4 Link & Bags For 73-87 Chevy C10
Airmaxxx Front Rear Weld On Kit Notch Parallel 4 Link & Bags For 73-87 Chevy C10
Airmaxxx Front Rear Weld On Kit Notch Parallel 4 Link & Bags For 73-87 Chevy C10
Airmaxxx Front Rear Weld On Kit Notch Parallel 4 Link & Bags For 73-87 Chevy C10
Airmaxxx Front Rear Weld On Kit Notch Parallel 4 Link & Bags For 73-87 Chevy C10
Airmaxxx Front Rear Weld On Kit Notch Parallel 4 Link & Bags For 73-87 Chevy C10
Airmaxxx Front Rear Weld On Kit Notch Parallel 4 Link & Bags For 73-87 Chevy C10
Airmaxxx Front Rear Weld On Kit Notch Parallel 4 Link & Bags For 73-87 Chevy C10
Airmaxxx Front Rear Weld On Kit Notch Parallel 4 Link & Bags For 73-87 Chevy C10

Airmaxxx Front Rear Weld On Kit Notch Parallel 4 Link & Bags For 73-87 Chevy C10
1973-87 Chevy C10 Deep Drop Front & Rear Air Ride Suspension w/ Parallel 4 Link. 2600 Air Bags and Manual Inflation. Deep Drop Cups Weld In To Lower OEM Arms for More Drop. To see Air Management Options. Five 24.00″ x 1.25″ DOM Bars w/ LH and RH Rod Ends. Parallel 4 Link Frame and Axle Weld on Mounts (3/16-1/4 Thick). 8 PCS Weld in Step Notch (see pics for specs). Upper Weld on Frame Mounts. Over the Axle Bag Mounts. Front Weld in Deep Drop Bag Mounts. Four 2600 Airmaxxx Bags w/ Hardware. Four 3/8 Nickle/Brass Air Bag Fittings. Two 3/8 Nickle/Brass Tee Fittings. Two 3/8 Schrader Valve (inflation). 20ft SMC DOT Air Hose. The right to make changes in design or add to or improve on product without incurring any obligations to install the same on products previously manufactured is expressly reserved. All parts are aftermarket replacement parts. Unless specifically noted, no implication is made that these parts are the original car manufacturers’, are from the original suppliers, or are approved by them. Always utilize safety restrain systems while operating vehicle. Billet Adapters are intended to be used ONLY on a show vehicle, stylized for a special look and NOT intended to be used on long driving, freeway driving and every day driving. Under no circumstances will Phx Wheel Inc. Be liable to any party for any direct, indirect, special, incidental, consequential, or other damages based on any improper use.. It is up to the user and/or installer to determine fitness for any other application. Many of our products require fabrication skills to install and should only be installed by a qualified fabricator or mechanic. Product must be unused and in original boxes and packaging material. Or without a RA# will be refused. No claims will be accepted on parts that have been modified in any way. It is also the responsibility of the person installing any component or kit to determine the suitability of the components or kit for that particular application. Products are intended for off road and show use only. Always check with your local authorities for highway laws in your area because highway laws and the enforcement of those laws vary widely. The item “Airmaxxx Front Rear Weld On Kit Notch Parallel 4 Link & Bags For 73-87 Chevy C10″ is in sale since Tuesday, May 18, 2021. This item is in the category “eBay Motors\Parts & Accessories\Performance & Racing Parts\Auto Performance Parts\Chassis, Suspension & Brakes\Lower Kits & Parts”. The seller is “airslamit” and is located in Mesa, Arizona. This item can be shipped worldwide.
  • Custom Bundle: No
  • Interchange Part Number: 4link,4-link,air suspension,air ride,ride,tech
  • Adjustable: Yes
  • Manufacturer Part Number: K-GM73-DDBB-PAR-2600
  • Included Hardware: Air Fittings
  • Placement on Vehicle: Left
  • Other Part Number: weld full adjustable Rear supension
  • Brand: Airslamit Airmaxxx
  • Fitment Type: Performance/Custom
  • Warranty: Lifetime

Airmaxxx Front Rear Weld On Kit Notch Parallel 4 Link & Bags For 73-87 Chevy C10

73-87 C10 C20 Airbag Kit Stage 1 1/4 Manual Control 4 Path Air Ride System

73-87 C10 C20 Airbag Kit Stage 1 1/4 Manual Control 4 Path Air Ride System
73-87 C10 C20 Airbag Kit Stage 1 1/4 Manual Control 4 Path Air Ride System
73-87 C10 C20 Airbag Kit Stage 1 1/4 Manual Control 4 Path Air Ride System
73-87 C10 C20 Airbag Kit Stage 1 1/4 Manual Control 4 Path Air Ride System
73-87 C10 C20 Airbag Kit Stage 1 1/4 Manual Control 4 Path Air Ride System
73-87 C10 C20 Airbag Kit Stage 1 1/4 Manual Control 4 Path Air Ride System
73-87 C10 C20 Airbag Kit Stage 1 1/4 Manual Control 4 Path Air Ride System
73-87 C10 C20 Airbag Kit Stage 1 1/4 Manual Control 4 Path Air Ride System
73-87 C10 C20 Airbag Kit Stage 1 1/4 Manual Control 4 Path Air Ride System
73-87 C10 C20 Airbag Kit Stage 1 1/4 Manual Control 4 Path Air Ride System

73-87 C10 C20 Airbag Kit Stage 1 1/4 Manual Control 4 Path Air Ride System
If you’re shopping for a basic air management kit, this is just the ticket. Manual paddle valves are where the whole air ride scene started, and there are still cars and trucks from 20+ years ago running these things! You won’t be showing off your air ride at every stop light, but you’ll be able to easily set a ride height, drive, then drop down low when you park- clean and simple, and dead-reliable. Here’s what you get with our Stage 1 package. 4 path manual control panel. One switch per corner, and a pair of dual needle gauges to help you set your ride height, all mounted on a brushed stainless steel panel. Front and Rear Airbag Mounting Brackets. The front brackets bolt directly in place of your coil springs, and the rears weld to the side of the notch and on top of your axle. 8-piece Weld-in Frame Notch Kit. This notch is big enough to lay 22 wheels, and is stronger than the section of frame it replaces. Viair 480C chrome air compressor. Big enough to keep your air tank filled up, small enough to work with your factory alternator and battery. 5 gallon polished aluminum air tank. The right size tank to fit under your bed, and enough air to lift you up without waiting. DOT-approved air line and fittings. We don’t cheap out on our plumbing. Only the highest-quality fittings and line to give you a leak-free system. Includes pressure switch, relay, 10 gauge wire for your air compressor, and 18 gauge wire for your pressure switch. All pre-wired and ready to install. Complete plumbing and wiring diagrams. We try to make your life easy, but if you have questions we’re always happy to help! We tailor each kit to include all of the fittings and wiring connections you’ll need. With this air suspension kit, you can expect your ride to lift or drop in about 6-8 seconds. On any car or truck with a leaf spring rear suspension, we always recommend replacing the leaf springs with a 4 link. The item “73-87 C10 C20 Airbag Kit Stage 1 1/4 Manual Control 4 Path Air Ride System” is in sale since Friday, November 20, 2020. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Suspension & Steering\Lower Kits & Parts”. The seller is “twisted_images” and is located in El Reno, Oklahoma. This item can be shipped worldwide.
  • Manufacturer Part Number: KIT-108-1
  • Brand: Twisted Images
  • Warranty: Yes

73-87 C10 C20 Airbag Kit Stage 1 1/4 Manual Control 4 Path Air Ride System

73-87 C10 Front Deep Drop Air Ride Suspension Kit Bag Brackets Mounts Spindle

73-87 C10 Front Deep Drop Air Ride Suspension Kit Bag Brackets Mounts Spindle
73-87 C10 Front Deep Drop Air Ride Suspension Kit Bag Brackets Mounts Spindle
73-87 C10 Front Deep Drop Air Ride Suspension Kit Bag Brackets Mounts Spindle
73-87 C10 Front Deep Drop Air Ride Suspension Kit Bag Brackets Mounts Spindle
73-87 C10 Front Deep Drop Air Ride Suspension Kit Bag Brackets Mounts Spindle
73-87 C10 Front Deep Drop Air Ride Suspension Kit Bag Brackets Mounts Spindle
73-87 C10 Front Deep Drop Air Ride Suspension Kit Bag Brackets Mounts Spindle
73-87 C10 Front Deep Drop Air Ride Suspension Kit Bag Brackets Mounts Spindle
73-87 C10 Front Deep Drop Air Ride Suspension Kit Bag Brackets Mounts Spindle
73-87 C10 Front Deep Drop Air Ride Suspension Kit Bag Brackets Mounts Spindle
73-87 C10 Front Deep Drop Air Ride Suspension Kit Bag Brackets Mounts Spindle
73-87 C10 Front Deep Drop Air Ride Suspension Kit Bag Brackets Mounts Spindle

73-87 C10 Front Deep Drop Air Ride Suspension Kit Bag Brackets Mounts Spindle
To Shop Air Managements. Fits: 1973-87 GM C10 Trucks + 73-91 Blazer / Suburban. Must have 1.25 Heavy Duty Brake Rotors. (see fitment guide above). Airslamit Front 2.5 Drop Spindles (1.25 Heavy Duty Rotors). Airmaxxx Front Deep Drop Weld in Air Bag Mounts. Two – Aimaxxx 2600 1/2 Port Air Bags. Two – Maxtrac 1300LL Front Shocks. 20ft 3/8 DOT Air Hose. Nickle Plated Brass PTC Fitting Kit. 3/8 Schrader Valves (manual inflation). The right to make changes in design or add to or improve on product without incurring any obligations to install the same on products previously manufactured is expressly reserved. All parts are aftermarket replacement parts. Unless specifically noted, no implication is made that these parts are the original car manufacturers’, are from the original suppliers, or are approved by them. Always utilize safety restrain systems while operating vehicle. Billet Adapters are intended to be used ONLY on a show vehicle, stylized for a special look and NOT intended to be used on long driving, freeway driving and every day driving. Under no circumstances will Phx Wheel Inc. Be liable to any party for any direct, indirect, special, incidental, consequential, or other damages based on any improper use.. It is up to the user and/or installer to determine fitness for any other application. Many of our products require fabrication skills to install and should only be installed by a qualified fabricator or mechanic. Product must be unused and in original boxes and packaging material. Or without a RA# will be refused. No claims will be accepted on parts that have been modified in any way. It is also the responsibility of the person installing any component or kit to determine the suitability of the components or kit for that particular application. Products are intended for off road and show use only. Always check with your local authorities for highway laws in your area because highway laws and the enforcement of those laws vary widely. The item “73-87 C10 Front Deep Drop Air Ride Suspension Kit Bag Brackets Mounts Spindle” is in sale since Friday, August 28, 2020. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Suspension & Steering\Lower Kits & Parts”. The seller is “airslamit” and is located in Mesa, Arizona. This item can be shipped worldwide.
  • Custom Bundle: Yes
  • Interchange Part Number: Front Rear airride system bundle
  • Adjustable: Yes
  • Manufacturer Part Number: K-BB-C1073DDF-SPSS-HF
  • Part Type: Suspension Lowering Hardware Kit
  • Included Hardware: Front and Rear Mounting Brackets
  • Placement on Vehicle: Left
  • Brand: Airmaxxx
  • Fitment Type: Performance/Custom
  • Warranty: Unspecified Length
  • Bundle Description: Front Weld On air Bag Brackets and hardware, 3/8 Hose 20 ft, (2) Air Bag Elbow Fittings, (1) 3/8 Tee Fittings, (1) schrader Valves, Shock Absorbers, 2.5″ Drop Spindles

73-87 C10 Front Deep Drop Air Ride Suspension Kit Bag Brackets Mounts Spindle

73-87 C10 3/8 Front and Rear Bolt in Air Ride Suspension Bag Brackets Mounts

73-87 C10 3/8 Front and Rear Bolt in Air Ride Suspension Bag Brackets Mounts
73-87 C10 3/8 Front and Rear Bolt in Air Ride Suspension Bag Brackets Mounts
73-87 C10 3/8 Front and Rear Bolt in Air Ride Suspension Bag Brackets Mounts
73-87 C10 3/8 Front and Rear Bolt in Air Ride Suspension Bag Brackets Mounts
73-87 C10 3/8 Front and Rear Bolt in Air Ride Suspension Bag Brackets Mounts
73-87 C10 3/8 Front and Rear Bolt in Air Ride Suspension Bag Brackets Mounts
73-87 C10 3/8 Front and Rear Bolt in Air Ride Suspension Bag Brackets Mounts
73-87 C10 3/8 Front and Rear Bolt in Air Ride Suspension Bag Brackets Mounts
73-87 C10 3/8 Front and Rear Bolt in Air Ride Suspension Bag Brackets Mounts
73-87 C10 3/8 Front and Rear Bolt in Air Ride Suspension Bag Brackets Mounts
73-87 C10 3/8 Front and Rear Bolt in Air Ride Suspension Bag Brackets Mounts
73-87 C10 3/8 Front and Rear Bolt in Air Ride Suspension Bag Brackets Mounts

73-87 C10 3/8 Front and Rear Bolt in Air Ride Suspension Bag Brackets Mounts
Just Add Air Management Kit to Complete. To Shop Air Managements. Fits: 1973-87 GM C10 Trucks/ Blazer / Suburban. (see fitment guide above). Airmaxxx Front Bolt Air Bag Cups. Airmaxxx Rear Weld on Air Bag Mounts. Four – Aimaxxx 2600 1/2 Port Air Bags. 20ft 3/8 DOT Air Hose. Nickle Plated Brass PTC Fitting Kit. Two 3/8 Schrader Valves (manual inflation). The right to make changes in design or add to or improve on product without incurring any obligations to install the same on products previously manufactured is expressly reserved. All parts are aftermarket replacement parts. Unless specifically noted, no implication is made that these parts are the original car manufacturers’, are from the original suppliers, or are approved by them. Always utilize safety restrain systems while operating vehicle. Billet Adapters are intended to be used ONLY on a show vehicle, stylized for a special look and NOT intended to be used on long driving, freeway driving and every day driving. Under no circumstances will Phx Wheel Inc. Be liable to any party for any direct, indirect, special, incidental, consequential, or other damages based on any improper use.. It is up to the user and/or installer to determine fitness for any other application. Many of our products require fabrication skills to install and should only be installed by a qualified fabricator or mechanic. Product must be unused and in original boxes and packaging material. Or without a RA# will be refused. No claims will be accepted on parts that have been modified in any way. It is also the responsibility of the person installing any component or kit to determine the suitability of the components or kit for that particular application. Products are intended for off road and show use only. Always check with your local authorities for highway laws in your area because highway laws and the enforcement of those laws vary widely. The item “73-87 C10 3/8 Front and Rear Bolt in Air Ride Suspension Bag Brackets Mounts” is in sale since Wednesday, August 19, 2020. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Suspension & Steering\Lower Kits & Parts”. The seller is “airslamit” and is located in Mesa, Arizona. This item can be shipped worldwide.
  • Custom Bundle: Yes
  • Interchange Part Number: Front Rear airride system bundle
  • Adjustable: Yes
  • Manufacturer Part Number: K-BB-C1073FR-HF
  • Part Type: Suspension Lowering Hardware Kit
  • Included Hardware: Front and Rear Mounting Brackets
  • Placement on Vehicle: Left
  • Brand: Airmaxxx
  • Fitment Type: Performance/Custom
  • Warranty: Unspecified Length
  • Bundle Description: Front and Rear air Bag Brackets and hardware, 3/8 Hose 20 ft, (4) air Bag Elbow Fittings, (2) 3/8 Tee Fittings, (2) schrader Valves

73-87 C10 3/8 Front and Rear Bolt in Air Ride Suspension Bag Brackets Mounts

Complete Air Ride Suspension Kit 73-87 GM C10 Evolve Manifold Bags 480 Black

Complete Air Ride Suspension Kit 73-87 GM C10 Evolve Manifold Bags 480 Black
Complete Air Ride Suspension Kit 73-87 GM C10 Evolve Manifold Bags 480 Black
Complete Air Ride Suspension Kit 73-87 GM C10 Evolve Manifold Bags 480 Black
Complete Air Ride Suspension Kit 73-87 GM C10 Evolve Manifold Bags 480 Black
Complete Air Ride Suspension Kit 73-87 GM C10 Evolve Manifold Bags 480 Black
Complete Air Ride Suspension Kit 73-87 GM C10 Evolve Manifold Bags 480 Black
Complete Air Ride Suspension Kit 73-87 GM C10 Evolve Manifold Bags 480 Black
Complete Air Ride Suspension Kit 73-87 GM C10 Evolve Manifold Bags 480 Black
Complete Air Ride Suspension Kit 73-87 GM C10 Evolve Manifold Bags 480 Black
Complete Air Ride Suspension Kit 73-87 GM C10 Evolve Manifold Bags 480 Black

Complete Air Ride Suspension Kit 73-87 GM C10 Evolve Manifold Bags 480 Black
To See More C10 Kits. Complete Bolt On Front and Weld on Rear Air Ride Kit. Plug and Play With All The Wiring Needed. (see fitment guide above). Airmaxxx Front Bolt Air Bag Cups. Airmaxxx Rear Weld on Air Bag Mounts. Four – Aimaxxx 2600 1/2 Port Air Bags. Dual Airmaxxx Dual Black 480 Air Compressors. Airmaxxx Black 5 Gallon 7 Port Steel Aluminum Air Tank. Airmaxxx 7 Switch Rocker Switch Bo. Airmaxxx 10Ft Extension Harness. Evolve 4-Corner Valve Manifold by AVS. Two AVS 3/8 Black Water Traps. 50ft 3/8 DOT Air Hose. Nickle Plated Brass PTC Fitting Kit. We Will Also Include One – Airmaxxx Dual Air Compressor Install Wiring Kit. This system is almost 100% Plug and Play (4 Gauge Main Power Wire and all Fuses and Connectors). The right to make changes in design or add to or improve on product without incurring any obligations to install the same on products previously manufactured is expressly reserved. All parts are aftermarket replacement parts. Unless specifically noted, no implication is made that these parts are the original car manufacturers’, are from the original suppliers, or are approved by them. Always utilize safety restrain systems while operating vehicle. Billet Adapters are intended to be used ONLY on a show vehicle, stylized for a special look and NOT intended to be used on long driving, freeway driving and every day driving. Under no circumstances will Phx Wheel Inc. Be liable to any party for any direct, indirect, special, incidental, consequential, or other damages based on any improper use.. It is up to the user and/or installer to determine fitness for any other application. Many of our products require fabrication skills to install and should only be installed by a qualified fabricator or mechanic. Product must be unused and in original boxes and packaging material. Or without a RA# will be refused. No claims will be accepted on parts that have been modified in any way. It is also the responsibility of the person installing any component or kit to determine the suitability of the components or kit for that particular application. Products are intended for off road and show use only. Always check with your local authorities for highway laws in your area because highway laws and the enforcement of those laws vary widely. The item “Complete Air Ride Suspension Kit 73-87 GM C10 Evolve Manifold Bags 480 Black” is in sale since Sunday, May 3, 2020. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Suspension & Steering\Lower Kits & Parts”. The seller is “airslamit” and is located in Mesa, Arizona. This item can be shipped worldwide.
  • Custom Bundle: Yes
  • Interchange Part Number: Front Rear airride system bundle
  • Adjustable: Yes
  • Manufacturer Part Number: K-GM73-A480B2-57S-VU4AVS7H-WK-HF
  • Part Type: Suspension Lowering Hardware Kit
  • Included Hardware: Front and Rear Mounting Brackets
  • Placement on Vehicle: Left
  • Other Part Number: Black SwitchBox plug and play Air compressor
  • Brand: Airmaxxx // AVS Evolve
  • Fitment Type: Performance/Custom
  • Warranty: Unspecified Length
  • Bundle Description: Evolve Manifold Valve By AVS airmaxxx Compressors with install wire kits, 7 Switch Controller, 10 ft Extension Harness, 5 gal steel tank and Airbags and brackets 3/8 Hose and fittings. 2 water traps

Complete Air Ride Suspension Kit 73-87 GM C10 Evolve Manifold Bags 480 Black

B Airbagit 73-87 C10 Air Suspension with 1/2 Valves 7-Switch 8Valves 8-tank

B Airbagit 73-87 C10 Air Suspension with 1/2 Valves 7-Switch 8Valves 8-tank

B Airbagit 73-87 C10 Air Suspension with 1/2 Valves 7-Switch 8Valves 8-tank
29 years at the same location. If we do not have it, we can build it. The item “B Airbagit 73-87 C10 Air Suspension with 1/2 Valves 7-Switch 8Valves 8-tank” is in sale since Saturday, October 31, 2015. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Suspension & Steering\Lower Kits & Parts”. The seller is “chassis_tech” and is located in Mesa, Arizona. This item can be shipped worldwide.
  • MPN: 262120912312
  • Manufacturer: Chassis Tech
  • UPC: Does not apply
  • Country/Region of Manufacture: United States
  • Interchange Part Number: 480,480c,AM480,bag,airbag,bags,444,FBSS,2600
  • Part Brand: Chassis Tech
  • Manufacturer Part Number: 262120912312
  • Placement on Vehicle: Left
  • Other Part Number: Speed Switch Air ride Suspension Custom Parts Kit
  • Brand: CHASSIS TECH
  • Warranty: Yes

B Airbagit 73-87 C10 Air Suspension with 1/2 Valves 7-Switch 8Valves 8-tank