3/8 Front Rear Air Ride Suspension Bag Bracket Kit For 1965-70 Impala Caprice

June 21, 2021 admin

3/8 Front Rear Air Ride Suspension Bag Bracket Kit For 1965-70 Impala Caprice

1965-70 GM Cars Front & Rear Air Ride Suspension. Air Bags Mounting Brackets and Manual Inflation Kit. Just Add Air Management. To see Air Management Options. Airmaxxx Front Bolt In Cups Upper and Lower Mounts. Bolt In Cups Upper and Lower Mounts. Two – Aimaxxx 2500 1/2 Port Air Bags. Two – Aimaxxx 2600 1/2 Port Air Bags. 20ft 3/8 DOT Air Hose. Nickle Plated Brass PTC Fitting Kit. Two 3/8 Schrader Valves (manual inflation). Kit Recommended For The Best Ride. The right to make changes in design or add to or improve on product without incurring any obligations to install the same on products previously manufactured is expressly reserved. All parts are aftermarket replacement parts. Unless specifically noted, no implication is made that these parts are the original car manufacturers’, are from the original suppliers, or are approved by them. Always utilize safety restrain systems while operating vehicle. Billet Adapters are intended to be used ONLY on a show vehicle, stylized for a special look and NOT intended to be used on long driving, freeway driving and every day driving. Under no circumstances will Phx Wheel Inc. Be liable to any party for any direct, indirect, special, incidental, consequential, or other damages based on any improper use.. It is up to the user and/or installer to determine fitness for any other application. Many of our products require fabrication skills to install and should only be installed by a qualified fabricator or mechanic. Product must be unused and in original boxes and packaging material. Or without a RA# will be refused. No claims will be accepted on parts that have been modified in any way. It is also the responsibility of the person installing any component or kit to determine the suitability of the components or kit for that particular application. Products are intended for off road and show use only. Always check with your local authorities for highway laws in your area because highway laws and the enforcement of those laws vary widely. The item “3/8 Front Rear Air Ride Suspension Bag Bracket Kit For 1965-70 Impala Caprice” is in sale since Wednesday, August 19, 2020. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Suspension & Steering\Lower Kits & Parts”. The seller is “airslamit” and is located in Mesa, Arizona. This item can be shipped worldwide.

Custom Bundle: Yes
Interchange Part Number: Front Rear airride system bundle
Adjustable: Yes
Manufacturer Part Number: K-BB-IMP65FR-2526-HF
Part Type: Suspension Lowering Hardware Kit
Included Hardware: Air Bag
Placement on Vehicle: Left
Brand: Airmaxxx
Fitment Type: Performance/Custom
Warranty: Unspecified Length
Bundle Description: Air Fittings, Inflation Valve (schrader), Front Mounting Brackets, Rear Mounting Brackets, Air Bag, Mounting Hardware, DOT Air Hose . Nickle Plated Brass Fittings

Front Right/ Left REMAN Suspension Air Struts Mercedes 221 S350 S450 S500 4Matic

June 19, 2021 admin

Front Right/ Left REMAN Suspension Air Struts Mercedes 221 S350 S450 S500 4Matic

Front Right/ Left REMAN Suspension Air Struts Mercedes 221 S350 S450 S500 4Matic. What is an air spring bag strut? Sometimes it is called an Air Spring, Air Shock, Air Bag or Bellows. A conventional strut uses a steel coil spring but an air strut employs an air spring bag or bellow. This makes the ride more comfortable and gives the driver more control of ride height. The most common reason for an air strut failure is due to dry rotting of the air spring bag. This is something that happens over time, the rubber starts to deteriorate and causes leaks, when this happens the air bag can no longer hold air pressure. A leaking air bag can cause the strut it fits over to fail as well. The second factor of an air strut failure is the strut itself. The strut is pressurized with fluid, and if the strut begins to fail it will no longer have the same pressure to hold the vehicle. If this system begins to fail one visible sign will be that your vehicle will be lower than factory height. If Air Struts are not replaced on time it will cause Air Suspension Compressor Failure. S-Class (W221) Models Include: S350, S450 & S500. Note: This Air Spring Bag Strut will work on S-Class Vehicles With 4MATIC (AWD) Suspension Only, It Will NOT fit on Vehicles Equipped with Base RWD or ABC Suspension Models. WARNING: The offset plate is NOT included and will need to be reused on your RMT air strut in the same orientation from which it was removed. A2213200538 , A2213200038 , A2213207413 , A2213209813 , A2213209313 , A2213204913 , A221320931380 , A221320053880 , A2213201838 , A221 320 05 38 , A221 320 00 38 , A221 320 74 13 , A221 320 98 13 , A221 320 93 13 , A221 320 49 13 , A221 320 93 13 80 , A221 320 05 38 80 , A221 320 18 38 , 2213200538 , 2213200038 , 2213207413 , 2213209813 , 2213209313 , 2213204913 , 221320931380 , 221320053880 , 2213201838 , 221 320 05 38 , 221 320 00 38 , 221 320 74 13 , 221 320 98 13 , 221 320 93 13 , 221 320 49 13 , 221 320 93 13 80 , 221 320 05 38 80 , 221 320 18 38. A2213200438 , A2213205313 , A2213201738 , A221320173880 , A221320043880. A221 320 04 38 , A221 320 53 13 , A221 320 17 38 , A221 320 17 38 80 , A221 320 04 38 80. 2213200438 , 2213205313 , 2213201738 , 221320173880 , 221320043880. 221 320 04 38 , 221 320 53 13 , 221 320 17 38 , 221 320 17 38 80 , 221 320 04 38 80. Please make sure that the problem with your vehicle is with your Original Part. Do not trust your safety to companies outside the U. GET CASH BACK – LET US RECYCLE YOUR CORE. Placing an Order Signifies that You Accept And Agree to Our Terms and Conditions. Unless a resale certificate is sent.. The resale certificate is subject to RMT’s approval. Boxes: UPS is our preferred shipper for packages weighing over 2 pounds and they do not deliver to P. Boxes, Physical addresses only. Boxes and Physical addresses. This is to ensure that parts pass quality tests. International buyers please note. Except as set forth in 3. In the event that a product proves to be defective, RMTs sole obligation shall be, at its option, to repair or replace the product. Upon inspection if the supposed defective part does not meet warrantable conditions and / or is in the 3. EXCLUSIONS the Customer will have the option of purchasing a new part and RMT. RMT shall send a part out from stock. Once the claimed defective RMT part arrives back at RMTs facility a full inspection will be conducted. No employee, agent, or representative of RMT has the authority to waive, alter, vary, or add to the terms hereof without the prior written approval of an officer of RMT. The following products have time limited warranties: 1. ALL CLAIMS MUST BE MADE BY THE CUSTOMER AND MAY NOT BE MADE BY ANY THIRD PARTY. ANY SUCH ATTEMPTED TRANSFER OR ASSIGNMENT SHALL BE NULL AND VOID. THE CUSTOMER AGREES TO TAKE FULL RESPONSIBILITY FOR ANY AND ALL LABOR COSTS. THE PARTS, ESPECIALLY FOR COMPRESSORS! AFTER INSPECTION OF A PRODUCT, RMT DETERMINES, IN ITS SOLE DISCRETION, THAT IT IS NOT DEFECTIVE IN MATERIAL OR WORKMANSHIP. THIS INCLUDES BUT NOT LIMITED TO; 1. ANY FLUID THAT DOES NOT BELONG TO THE SYSTEM. ANOTHER LEAK IN THE SYSTEM (LEAKING AIR BLADDERS, OR AIR LINES IN THE SYSTEM ARE LEAKING) IS CAUSING THE RMT PRODUCT TO FAIL CAUSING UNITS SUCH AS AN AIR SUSPENSION COMPRESSOR TO OVER WORK AND BURN OUT THE MOTOR. IMPROPER INSTALLATION OF THE PRODUCT. IMPROPER USE OF THE PART. NOT PROPERLY CONNECTING THE CONNECTORS, SUCH AS REVERSE POLARITY, WRONG PLUGS, AND AFTERMARKET PLUGS. FUSES BEING BLOWN / BURNT OUT DUE TO NOT REPLACING THE RELAY. ANY PART IN A PRODUCT OR ANY INGREDIENT CONTAINED IN A PRODUCT REQUIRES REPLACEMENT OR REPAIR THROUGH ROUTINE USAGE OR NORMAL WEAR AND TEAR 5. A PRODUCT IS NOT MAINTAINED OR USED IN ACCORDANCE WITH RMTS APPLICABLE OPERATING AND/OR MAINTENANCE MANUALS, WHETHER BY THE CUSTOMER OR ANY THIRD PARTY; 6. A PRODUCT HAS BEEN SUBJECT TO MISUSE, MISAPPLICATION, NEGLIGENCE, NEGLECT (INCLUDING, BUT NOT LIMITED TO, IMPROPER MAINTENANCE OR STORAGE), ACCIDENT, CATASTROPHE, IMPROPER INSTALLATION, MODIFICATION, ADJUSTMENT, REPAIR OR LUBRICATION, WHETHER BY THE CUSTOMER OR ANY THIRD PARTY, WITHOUT THE PRIOR WRITTEN CONSENT OF RMT. MISUSE SHALL INCLUDE, BUT NOT BE LIMITED TO, DETERIORATION IN A PRODUCT DUE TO CHEMICAL ACTION AND WEAR CAUSED BY THE PRESENCE OF ABRASIVE MATERIALS 7. THE SYSTEM INTO WHICH THE PRODUCT BECOMES INCORPORATED IS NOT COMPATIBLE WITH THE PRODUCT, OR IT IS NOT FREE FROM CRITICAL SPEED OR TORSIONAL OR OTHER TYPE OF VIBRATION WITHIN THE SPECIFIED OPERATING RANGE, NO MATTER HOW INDUCED; OR 8. MORE THAN TWO (2) MINUTES OF RUNTIME IS A SIGN OF OVER WORKING THE COMPRESSOR, RISKING IT TO BURN OUT. The part must be unused, in it’s original package (No wrapping or seals can be broken), and must be in re-sellable condition. This Listing is one of a few that has a Mandatory Core Deposit. We are a GREEN company and we do our best to Recycle. We will rebuild this part and help others like you. Thank you for Helping Us Recycle. Core Prices are subject to change due to supply and demand, condition and quantity of cores daily. 8AM to 6PM EST Monday-Friday. Great Service & Parts Quality Guaranteed! The item “Front Right/ Left REMAN Suspension Air Struts Mercedes 221 S350 S450 S500 4Matic” is in sale since Wednesday, October 5, 2016. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Suspension & Steering\Shocks & Struts”. The seller is “rebuildmastertech” and is located in Pompano Beach, Florida. This item can be shipped worldwide.

Country/Region of Manufacture: United States
Custom Bundle: No
Interchange Part Number: W221
Adjustable: Yes
Interchange Part Number 2: A2213200538, A2213200038, A2213200438, A2213205313
Interchange Part Number 3: A221 320 05 38, A221 320 00 38
Interchange Part Number 4: 221 320 05 38, 221 320 00 38
Interchange Part Number 5: A221 320 04 38, A221 320 53 13
Interchange Part Number 6: 221 320 04 38, 221 320 53 13
Greasable or Sealed: Sealed
Manufacturer Part Number: M221-R310-4WFP
Part Type: Air Suspension Strut
Gas Charged Shock: Yes
Included Hardware: Connector Fitting
Kit or Single Part: Kit
Kit Parts Included: Air Shock
MPN: M221-R310-4WFP
OE Spec or Performance/Custom: OE Spec
Placement on Vehicle: Left
Other Part Number: Shock,Shocks,Strut,Springs,Bags,Benz,Benz
Brand: RMT
Fitment Type: Direct Replacement
Warranty: Lifetime

Front Right OEM REBUILD Suspension Air Spring Strut Mercedes E55 E63 AMG W211

May 27, 2021 admin

Front Right OEM REBUILD Suspension Air Spring Strut Mercedes E55 E63 AMG W211

Front Right OEM REBUILD Suspension Air Spring Strut Mercedes E55 E63 AMG W211. What is an air spring bag strut? Sometimes it is called an Air Spring, Air Shock, Air Bag or Bellows. A conventional strut uses a steel coil spring but an air strut employs an air spring bag or bellow. This makes the ride more comfortable and gives the driver more control of ride height. The most common reason for an air strut failure is due to dry rotting of the air spring bag. This is something that happens over time, the rubber starts to deteriorate and causes leaks, when this happens the air bag can no longer hold air pressure. A leaking air bag can cause the strut it fits over to fail as well. The second factor of an air strut failure is the strut itself. The strut is pressurized with fluid, and if the strut begins to fail it will no longer have the same pressure to hold the vehicle. If this system begins to fail one visible sign will be that your vehicle will be lower than factory height. If Air Struts are not replaced on time it will cause Air Suspension Compressor Failure. This Listing is For 1 Mercedes E-Class AMG W211 Front Right OEM Rebuild Suspension Air Spring Bag Strut. E-Class (W211) AMG Models Include. E55 AMG & E63 AMG. 2006 Mercedes Benz CLS55 AMG With Airmatic – Front Right. 2007 Mercedes Benz CLS63 AMG With Airmatic – Front Right. 2008 Mercedes Benz CLS63 AMG With Airmatic – Front Right. 2009 Mercedes Benz CLS63 AMG With Airmatic – Front Right. 2010 Mercedes Benz CLS63 AMG With Airmatic – Front Right. 2011 Mercedes Benz CLS63 AMG With Airmatic – Front Right. 2003 Mercedes Benz E55 AMG With Airmatic – Front Right. 2004 Mercedes Benz E55 AMG With Airmatic – Front Right. 2005 Mercedes Benz E55 AMG With Airmatic – Front Right. 2006 Mercedes Benz E55 AMG With Airmatic – Front Right. 2007 Mercedes Benz E63 AMG With Airmatic – Front Right. 2008 Mercedes Benz E63 AMG With Airmatic – Front Right. 2009 Mercedes Benz E63 AMG With Airmatic – Front Right. Note: This Air Spring Bag Strut will work on E-Class. WE CANNOT PROCESS YOUR ORDER UNTIL THE CORE DEPOSIT IS PAID. Please make sure that the problem with your vehicle is with your Original Part. Do not trust your safety to companies outside the U. GET CASH BACK – LET US RECYCLE YOUR CORE. Placing an Order Signifies that You Accept And Agree to Our Terms and Conditions. Unless a resale certificate is sent.. The resale certificate is subject to RMT’s approval. Boxes: UPS is our preferred shipper for packages weighing over 2 pounds and they do not deliver to P. Boxes, Physical addresses only. Boxes and Physical addresses. This is to ensure that parts pass quality tests. International buyers please note. Except as set forth in 3. In the event that a product proves to be defective, RMTs sole obligation shall be, at its option, to repair or replace the product. Upon inspection if the supposed defective part does not meet warrantable conditions and / or is in the 3. EXCLUSIONS the Customer will have the option of purchasing a new part and RMT. RMT shall send a part out from stock. Once the claimed defective RMT part arrives back at RMTs facility a full inspection will be conducted. No employee, agent, or representative of RMT has the authority to waive, alter, vary, or add to the terms hereof without the prior written approval of an officer of RMT. The following products have time limited warranties: 1. ALL CLAIMS MUST BE MADE BY THE CUSTOMER AND MAY NOT BE MADE BY ANY THIRD PARTY. ANY SUCH ATTEMPTED TRANSFER OR ASSIGNMENT SHALL BE NULL AND VOID. THE CUSTOMER AGREES TO TAKE FULL RESPONSIBILITY FOR ANY AND ALL LABOR COSTS. THE PARTS, ESPECIALLY FOR COMPRESSORS! AFTER INSPECTION OF A PRODUCT, RMT DETERMINES, IN ITS SOLE DISCRETION, THAT IT IS NOT DEFECTIVE IN MATERIAL OR WORKMANSHIP. THIS INCLUDES BUT NOT LIMITED TO; 1. ANY FLUID THAT DOES NOT BELONG TO THE SYSTEM. ANOTHER LEAK IN THE SYSTEM (LEAKING AIR BLADDERS, OR AIR LINES IN THE SYSTEM ARE LEAKING) IS CAUSING THE RMT PRODUCT TO FAIL CAUSING UNITS SUCH AS AN AIR SUSPENSION COMPRESSOR TO OVER WORK AND BURN OUT THE MOTOR. IMPROPER INSTALLATION OF THE PRODUCT. IMPROPER USE OF THE PART. NOT PROPERLY CONNECTING THE CONNECTORS, SUCH AS REVERSE POLARITY, WRONG PLUGS, AND AFTERMARKET PLUGS. FUSES BEING BLOWN / BURNT OUT DUE TO NOT REPLACING THE RELAY. ANY PART IN A PRODUCT OR ANY INGREDIENT CONTAINED IN A PRODUCT REQUIRES REPLACEMENT OR REPAIR THROUGH ROUTINE USAGE OR NORMAL WEAR AND TEAR 5. A PRODUCT IS NOT MAINTAINED OR USED IN ACCORDANCE WITH RMTS APPLICABLE OPERATING AND/OR MAINTENANCE MANUALS, WHETHER BY THE CUSTOMER OR ANY THIRD PARTY; 6. A PRODUCT HAS BEEN SUBJECT TO MISUSE, MISAPPLICATION, NEGLIGENCE, NEGLECT (INCLUDING, BUT NOT LIMITED TO, IMPROPER MAINTENANCE OR STORAGE), ACCIDENT, CATASTROPHE, IMPROPER INSTALLATION, MODIFICATION, ADJUSTMENT, REPAIR OR LUBRICATION, WHETHER BY THE CUSTOMER OR ANY THIRD PARTY, WITHOUT THE PRIOR WRITTEN CONSENT OF RMT. MISUSE SHALL INCLUDE, BUT NOT BE LIMITED TO, DETERIORATION IN A PRODUCT DUE TO CHEMICAL ACTION AND WEAR CAUSED BY THE PRESENCE OF ABRASIVE MATERIALS 7. THE SYSTEM INTO WHICH THE PRODUCT BECOMES INCORPORATED IS NOT COMPATIBLE WITH THE PRODUCT, OR IT IS NOT FREE FROM CRITICAL SPEED OR TORSIONAL OR OTHER TYPE OF VIBRATION WITHIN THE SPECIFIED OPERATING RANGE, NO MATTER HOW INDUCED; OR 8. MORE THAN TWO (2) MINUTES OF RUNTIME IS A SIGN OF OVER WORKING THE COMPRESSOR, RISKING IT TO BURN OUT. The part must be unused, in it’s original package (No wrapping or seals can be broken), and must be in re-sellable condition. This Listing is one of a few that has a Mandatory Core Deposit. We are a GREEN company and we do our best to Recycle. We will rebuild this part and help others like you. Thank you for Helping Us Recycle. Core Prices are subject to change due to supply and demand, condition and quantity of cores daily. 8AM to 6PM EST Monday-Friday. Great Service & Parts Quality Guaranteed! The item “Front Right OEM REBUILD Suspension Air Spring Strut Mercedes E55 E63 AMG W211″ is in sale since Monday, January 16, 2017. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Suspension & Steering\Shocks & Struts”. The seller is “rebuildmastertech” and is located in Pompano Beach, Florida. This item can be shipped worldwide.

Interchange Part Number: W211
Adjustable: Yes
Included Hardware: W211
Other Part Number: Struts,Shock,Springs,Bags,W211,Mercedes,AMG
Brand: RMT
Warranty: Lifetime
Country/Region of Manufacture: United States
Core Deposit: $100
Interchange Part Number 2: A2113205438, A2113205638, A2113208413, A2113206213
Interchange Part Number 3: A211 320 54 38, A211 320 56 38, A211 320 84 13, A211 320 62 13
Interchange Part Number 4: 211 320 54 38, 211 320 56 38, 211 320 84 13, 211 320 62 13
Kit or Single Part: Kit
Kit Parts Included: Air Shock
MPN: M211-R311-RWFR
Greasable or Sealed: Sealed
Manufacturer Part Number: M211-R311-RWFR
Part Type: Air Suspension Strut
Gas Charged Shock: Yes
OE Spec or Performance/Custom: OE Spec
Product Type: Air Strut
Placement on Vehicle: Right
Fitment Type: Direct Replacement

4 Front 6 Rear Suspension Lowering Drop Kit For 1999-06 Chevy GMC 1500 V8 Only

May 18, 2021 admin

4 Front 6 Rear Suspension Lowering Drop Kit For 1999-06 Chevy GMC 1500 V8 Only

Free XL T-shirt and Sticker! Must have 17 Wheels or Larger. Airslamit Front 2 Drop Spindles. Airslamit 2 Front Drop Coil Springs. Maxtrac Front Drop Shocks. Airslamit Rear Axle Relocator. Airslamit Rear Bolt On C-Section. Maxtrac Rear Drop Shocks. Spindles are E-Coated for Protection. Coil springs, Axle Saddle, C-notch Are Powder Coated for Protection. The right to make changes in design or add to or improve on product without incurring any obligations to install the same on products previously manufactured is expressly reserved. All parts are aftermarket replacement parts. Unless specifically noted, no implication is made that these parts are the original car manufacturers’, are from the original suppliers, or are approved by them. Always utilize safety restrain systems while operating vehicle. Billet Adapters are intended to be used ONLY on a show vehicle, stylized for a special look and NOT intended to be used on long driving, freeway driving and every day driving. Under no circumstances will Phx Wheel Inc. Be liable to any party for any direct, indirect, special, incidental, consequential, or other damages based on any improper use.. It is up to the user and/or installer to determine fitness for any other application. Many of our products require fabrication skills to install and should only be installed by a qualified fabricator or mechanic. Product must be unused and in original boxes and packaging material. Or without a RA# will be refused. No claims will be accepted on parts that have been modified in any way. It is also the responsibility of the person installing any component or kit to determine the suitability of the components or kit for that particular application. Products are intended for off road and show use only. Always check with your local authorities for highway laws in your area because highway laws and the enforcement of those laws vary widely. The item “4 Front 6 Rear Suspension Lowering Drop Kit For 1999-06 Chevy GMC 1500 V8 Only” is in sale since Thursday, September 17, 2020. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Suspension & Steering\Lower Kits & Parts”. The seller is “airslamit” and is located in Mesa, Arizona. This item can be shipped worldwide.

Custom Bundle: Yes
Interchange Part Number: 4link,4-link,air suspension,air ride,ride,tech
Adjustable: Yes
Manufacturer Part Number: K-DR-GM99-46-8
Included Hardware: 2.00 Drop Spindles
Placement on Vehicle: Left
Other Part Number: adjustable suspension
Brand: Airslamit
Fitment Type: Performance/Custom
Warranty: Lifetime
Bundle Description: 2″ Drop Spindles, 2″ Drop Coils, Front Shocks, Rear 6″ flip kit, Bolt in C-notch , pancake bump stops and rear Shocks

3/8 Front & Rear Bolt In Air Ride Suspension For 63-72 C10 Bag Brackets Mounts

May 5, 2021 admin

3/8 Front & Rear Bolt In Air Ride Suspension For 63-72 C10 Bag Brackets Mounts

Just Add Air Management Kit to Complete. To Shop Air Managements. (see fitment guide above). Airmaxxx Front Bolt Air Bag Cups. Airmaxxx Rear Bolt on Air Bag Mounts. Four – Aimaxxx 2600 1/2 Port Air Bags. 20ft 3/8 DOT Air Hose. Nickle Plated Brass PTC Fitting Kit. Two 3/8 Schrader Valves (manual inflation). The right to make changes in design or add to or improve on product without incurring any obligations to install the same on products previously manufactured is expressly reserved. All parts are aftermarket replacement parts. Unless specifically noted, no implication is made that these parts are the original car manufacturers’, are from the original suppliers, or are approved by them. Always utilize safety restrain systems while operating vehicle. Billet Adapters are intended to be used ONLY on a show vehicle, stylized for a special look and NOT intended to be used on long driving, freeway driving and every day driving. Under no circumstances will Phx Wheel Inc. Be liable to any party for any direct, indirect, special, incidental, consequential, or other damages based on any improper use.. It is up to the user and/or installer to determine fitness for any other application. Many of our products require fabrication skills to install and should only be installed by a qualified fabricator or mechanic. Product must be unused and in original boxes and packaging material. Or without a RA# will be refused. No claims will be accepted on parts that have been modified in any way. It is also the responsibility of the person installing any component or kit to determine the suitability of the components or kit for that particular application. Products are intended for off road and show use only. Always check with your local authorities for highway laws in your area because highway laws and the enforcement of those laws vary widely. The item “3/8 Front & Rear Bolt In Air Ride Suspension For 63-72 C10 Bag Brackets Mounts” is in sale since Monday, August 17, 2020. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Suspension & Steering\Lower Kits & Parts”. The seller is “airslamit” and is located in Mesa, Arizona. This item can be shipped worldwide.

Custom Bundle: Yes
Interchange Part Number: Front Rear airride system bundle
Adjustable: Yes
Manufacturer Part Number: K-BB-C1063FR-HF
Part Type: Suspension Lowering Hardware Kit
Included Hardware: Front and Rear Mounting Brackets
Placement on Vehicle: Left
Brand: Airmaxxx
Fitment Type: Performance/Custom
Warranty: Unspecified Length
Bundle Description: Front and Rear Bolts on air Bag Brackets and hardware, 3/8 Hose 20 ft, (4) air Bag Elbow Fittings, (2) 3/8 Tee Fittings, (2) schrader Valves

Front REMAN Suspension Air Spring Bag Struts Mercedes E350 E500 E550 211 4MATIC

May 3, 2021 admin

Front REMAN Suspension Air Spring Bag Struts Mercedes E350 E500 E550 211 4MATIC

Front REMAN Suspension Air Spring Bag Struts Mercedes E350 E500 E550 211 4MATIC. What is an air spring bag strut? Sometimes it is called an Air Spring, Air Shock, Air Bag or Bellows. A conventional strut uses a steel coil spring but an air strut employs an air spring bag or bellow. This makes the ride more comfortable and gives the driver more control of ride height. The most common reason for an air strut failure is due to dry rotting of the air spring bag. This is something that happens over time, the rubber starts to deteriorate and causes leaks, when this happens the air bag can no longer hold air pressure. A leaking air bag can cause the strut it fits over to fail as well. The second factor of an air strut failure is the strut itself. The strut is pressurized with fluid, and if the strut begins to fail it will no longer have the same pressure to hold the vehicle. If this system begins to fail one visible sign will be that your vehicle will be lower than factory height. If Air Struts are not replaced on time it will cause Air Suspension Compressor Failure. This Listing is For 1 Front Left & 1 Front Right Mercedes-Benz E-Class W211 OEM Rebuild Suspension Air Spring Bag Struts. E-Class (W211) Models Include: E280, E300, E320, E350, E500 & E550. Note: This Air Spring Bag Strut will work on E-Class Sedans & Wagons With 4MATIC AWD AIRMATIC Suspension Only, It Will NOT fit on Vehicles Equipped with Base RWD AIRMATIC. This part is NOT for E55 AMG & E63 AMG Models. You can send your Core for us to Remanufacture we can Rebuild your Strut with a 1-2 day Turn Around once we receive it. Once you place your order we will contact you to arrange the rebuilding of your part. Please make sure that the problem with your vehicle is with your Original Part. Do not trust your safety to companies outside the U. GET CASH BACK – LET US RECYCLE YOUR CORE. Placing an Order Signifies that You Accept And Agree to Our Terms and Conditions. Unless a resale certificate is sent.. The resale certificate is subject to RMT’s approval. Boxes: UPS is our preferred shipper for packages weighing over 2 pounds and they do not deliver to P. Boxes, Physical addresses only. Boxes and Physical addresses. This is to ensure that parts pass quality tests. International buyers please note. Except as set forth in 3. In the event that a product proves to be defective, RMTs sole obligation shall be, at its option, to repair or replace the product. Upon inspection if the supposed defective part does not meet warrantable conditions and / or is in the 3. EXCLUSIONS the Customer will have the option of purchasing a new part and RMT. RMT shall send a part out from stock. Once the claimed defective RMT part arrives back at RMTs facility a full inspection will be conducted. No employee, agent, or representative of RMT has the authority to waive, alter, vary, or add to the terms hereof without the prior written approval of an officer of RMT. The following products have time limited warranties: 1. ALL CLAIMS MUST BE MADE BY THE CUSTOMER AND MAY NOT BE MADE BY ANY THIRD PARTY. ANY SUCH ATTEMPTED TRANSFER OR ASSIGNMENT SHALL BE NULL AND VOID. THE CUSTOMER AGREES TO TAKE FULL RESPONSIBILITY FOR ANY AND ALL LABOR COSTS. THE PARTS, ESPECIALLY FOR COMPRESSORS! AFTER INSPECTION OF A PRODUCT, RMT DETERMINES, IN ITS SOLE DISCRETION, THAT IT IS NOT DEFECTIVE IN MATERIAL OR WORKMANSHIP. THIS INCLUDES BUT NOT LIMITED TO; 1. ANY FLUID THAT DOES NOT BELONG TO THE SYSTEM. ANOTHER LEAK IN THE SYSTEM (LEAKING AIR BLADDERS, OR AIR LINES IN THE SYSTEM ARE LEAKING) IS CAUSING THE RMT PRODUCT TO FAIL CAUSING UNITS SUCH AS AN AIR SUSPENSION COMPRESSOR TO OVER WORK AND BURN OUT THE MOTOR. IMPROPER INSTALLATION OF THE PRODUCT. IMPROPER USE OF THE PART. NOT PROPERLY CONNECTING THE CONNECTORS, SUCH AS REVERSE POLARITY, WRONG PLUGS, AND AFTERMARKET PLUGS. FUSES BEING BLOWN / BURNT OUT DUE TO NOT REPLACING THE RELAY. ANY PART IN A PRODUCT OR ANY INGREDIENT CONTAINED IN A PRODUCT REQUIRES REPLACEMENT OR REPAIR THROUGH ROUTINE USAGE OR NORMAL WEAR AND TEAR 5. A PRODUCT IS NOT MAINTAINED OR USED IN ACCORDANCE WITH RMTS APPLICABLE OPERATING AND/OR MAINTENANCE MANUALS, WHETHER BY THE CUSTOMER OR ANY THIRD PARTY; 6. A PRODUCT HAS BEEN SUBJECT TO MISUSE, MISAPPLICATION, NEGLIGENCE, NEGLECT (INCLUDING, BUT NOT LIMITED TO, IMPROPER MAINTENANCE OR STORAGE), ACCIDENT, CATASTROPHE, IMPROPER INSTALLATION, MODIFICATION, ADJUSTMENT, REPAIR OR LUBRICATION, WHETHER BY THE CUSTOMER OR ANY THIRD PARTY, WITHOUT THE PRIOR WRITTEN CONSENT OF RMT. MISUSE SHALL INCLUDE, BUT NOT BE LIMITED TO, DETERIORATION IN A PRODUCT DUE TO CHEMICAL ACTION AND WEAR CAUSED BY THE PRESENCE OF ABRASIVE MATERIALS 7. THE SYSTEM INTO WHICH THE PRODUCT BECOMES INCORPORATED IS NOT COMPATIBLE WITH THE PRODUCT, OR IT IS NOT FREE FROM CRITICAL SPEED OR TORSIONAL OR OTHER TYPE OF VIBRATION WITHIN THE SPECIFIED OPERATING RANGE, NO MATTER HOW INDUCED; OR 8. MORE THAN TWO (2) MINUTES OF RUNTIME IS A SIGN OF OVER WORKING THE COMPRESSOR, RISKING IT TO BURN OUT. The part must be unused, in it’s original package (No wrapping or seals can be broken), and must be in re-sellable condition. This Listing is one of a few that has a Mandatory Core Deposit. We are a GREEN company and we do our best to Recycle. We will rebuild this part and help others like you. Thank you for Helping Us Recycle. Core Prices are subject to change due to supply and demand, condition and quantity of cores daily. 8AM to 6PM EST Monday-Friday. Great Service & Parts Quality Guaranteed! The item “Front REMAN Suspension Air Spring Bag Struts Mercedes E350 E500 E550 211 4MATIC” is in sale since Sunday, November 30, 2014. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Suspension & Steering\Shocks & Struts”. The seller is “rebuildmastertech” and is located in Pompano Beach, Florida. This item can be shipped worldwide.

Country/Region of Manufacture: United States
Custom Bundle: Yes
Interchange Part Number: W211
Adjustable: Yes
Interchange Part Number 2: A2113209513, A2113209613, A211 320 95 13, A211 320 96 13
Interchange Part Number 3: 211 320 95 13, 211 320 96 13
Kit or Single Part: Kit
Kit Parts Included: 4Matic
MPN: M211-R310-4WFP
Greasable or Sealed: Sealed
Manufacturer Part Number: M211-R310-4WFP
Part Type: Air Suspension Strut
Gas Charged Shock: Yes
Included Hardware: Connector Fitting
OE Spec or Performance/Custom: OE Spec
Placement on Vehicle: Left
Other Part Number: Struts,Shock,Shocks,Springs,Bags
Brand: RMT
Fitment Type: Direct Replacement
Warranty: Lifetime
Bundle Description: Front Left, Right PAIR

1982 2005 S10 Front Weld on Air Ride Suspension Kit Spindles Shock Relocate

April 29, 2021 admin

1982 2005 S10 Front Weld on Air Ride Suspension Kit Spindles Shock Relocate

2500 Air Bags and Manual Inflation. To see Air Management Options. Front Bolt in Bag Mounts. Front 2 Drop Spindles. Two Maxtrac Loo/Loop Shock. Weld on Shock Relocate Kit (weld on). Two 2500 Airmaxxx Bags w/ Hardware. Two 3/8 Nickle/Brass Air Bag Fittings. One 3/8 Nickle/Brass Tee Fittings. One 3/8 Schrader Valve (inflation). 20ft SMC DOT Air Hose. The right to make changes in design or add to or improve on product without incurring any obligations to install the same on products previously manufactured is expressly reserved. All parts are aftermarket replacement parts. Unless specifically noted, no implication is made that these parts are the original car manufacturers’, are from the original suppliers, or are approved by them. Always utilize safety restrain systems while operating vehicle. Billet Adapters are intended to be used ONLY on a show vehicle, stylized for a special look and NOT intended to be used on long driving, freeway driving and every day driving. Under no circumstances will Phx Wheel Inc. Be liable to any party for any direct, indirect, special, incidental, consequential, or other damages based on any improper use.. It is up to the user and/or installer to determine fitness for any other application. Many of our products require fabrication skills to install and should only be installed by a qualified fabricator or mechanic. Product must be unused and in original boxes and packaging material. Or without a RA# will be refused. No claims will be accepted on parts that have been modified in any way. It is also the responsibility of the person installing any component or kit to determine the suitability of the components or kit for that particular application. Products are intended for off road and show use only. Always check with your local authorities for highway laws in your area because highway laws and the enforcement of those laws vary widely. The item “1982 2005 S10 Front Weld on Air Ride Suspension Kit Spindles Shock Relocate” is in sale since Monday, September 14, 2020. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Suspension & Steering\Lower Kits & Parts”. The seller is “airslamit” and is located in Mesa, Arizona. This item can be shipped worldwide.

Custom Bundle: No
Interchange Part Number: 4link,4-link,air suspension,air ride,ride,tech
Adjustable: Yes
Manufacturer Part Number: K-BB-S10F-SPSS-HF
Included Hardware: Inflation Valve (schrader)
Placement on Vehicle: Left
Brand: Airslamit Airmaxxx
Fitment Type: Performance/Custom
Warranty: Lifetime

Front OEM REBUILT Suspension Air Spring Struts SET Mercedes E350 E500 E550 W211

April 28, 2021 admin

Front OEM REBUILT Suspension Air Spring Struts SET Mercedes E350 E500 E550 W211

Front OEM REBUILT Suspension Air Spring Struts SET Mercedes E350 E500 E550 W211. What is an air spring bag strut? Sometimes it is called an Air Spring, Air Shock, Air Bag or Bellows. A conventional strut uses a steel coil spring but an air strut employs an air spring bag or bellow. This makes the ride more comfortable and gives the driver more control of ride height. The most common reason for an air strut failure is due to dry rotting of the air spring bag. This is something that happens over time, the rubber starts to deteriorate and causes leaks, when this happens the air bag can no longer hold air pressure. A leaking air bag can cause the strut it fits over to fail as well. The second factor of an air strut failure is the strut itself. The strut is pressurized with fluid, and if the strut begins to fail it will no longer have the same pressure to hold the vehicle. If this system begins to fail one visible sign will be that your vehicle will be lower than factory height. If Air Struts are not replaced on time it will cause Air Suspension Compressor Failure. This Listing is For 1 Front Left & 1 Front Right Mercedes-Benz E-Class W211 OEM Rebuild Suspension Air Spring Bag Struts. E-Class (W211) Models Include: E280, E320, E350, E500 & E550. 2003 Mercedes Benz E320 Sedan. 2004 Mercedes Benz E320 Sedan. 2005 Mercedes Benz E320 Sedan. 2006 Mercedes Benz E320 Sedan. 2007 Mercedes Benz E320 Sedan. 2008 Mercedes Benz E320 Sedan. 2009 Mercedes Benz E320 Sedan. 2006 Mercedes Benz E350 Sedan. 2007 Mercedes Benz E350 Sedan. 2008 Mercedes Benz E350 Sedan. 2009 Mercedes Benz E350 Sedan. 2003 Mercedes Benz E500. 2004 Mercedes Benz E500. 2005 Mercedes Benz E500. 2006 Mercedes Benz E500. 2007 Mercedes Benz E550. 2008 Mercedes Benz E550. 2009 Mercedes Benz E550. Note: This Air Spring Bag Strut will work on E-Class Sedans & Wagons With AIRMATIC Suspension Only, It Will NOT fit on Vehicles Equipped with 4MATIC. This part is NOT for E55 AMG & E63 AMG Models. WE CANNOT PROCESS YOUR ORDER UNTIL THE CORE DEPOSIT IS PAID. Please make sure that the problem with your vehicle is with your Original Part. Do not trust your safety to companies outside the U. GET CASH BACK – LET US RECYCLE YOUR CORE. Placing an Order Signifies that You Accept And Agree to Our Terms and Conditions. Unless a resale certificate is sent.. The resale certificate is subject to RMT’s approval. Boxes: UPS is our preferred shipper for packages weighing over 2 pounds and they do not deliver to P. Boxes, Physical addresses only. Boxes and Physical addresses. This is to ensure that parts pass quality tests. International buyers please note. Except as set forth in 3. In the event that a product proves to be defective, RMTs sole obligation shall be, at its option, to repair or replace the product. Upon inspection if the supposed defective part does not meet warrantable conditions and / or is in the 3. EXCLUSIONS the Customer will have the option of purchasing a new part and RMT. RMT shall send a part out from stock. Once the claimed defective RMT part arrives back at RMTs facility a full inspection will be conducted. No employee, agent, or representative of RMT has the authority to waive, alter, vary, or add to the terms hereof without the prior written approval of an officer of RMT. The following products have time limited warranties: 1. ALL CLAIMS MUST BE MADE BY THE CUSTOMER AND MAY NOT BE MADE BY ANY THIRD PARTY. ANY SUCH ATTEMPTED TRANSFER OR ASSIGNMENT SHALL BE NULL AND VOID. THE CUSTOMER AGREES TO TAKE FULL RESPONSIBILITY FOR ANY AND ALL LABOR COSTS. THE PARTS, ESPECIALLY FOR COMPRESSORS! AFTER INSPECTION OF A PRODUCT, RMT DETERMINES, IN ITS SOLE DISCRETION, THAT IT IS NOT DEFECTIVE IN MATERIAL OR WORKMANSHIP. THIS INCLUDES BUT NOT LIMITED TO; 1. ANY FLUID THAT DOES NOT BELONG TO THE SYSTEM. ANOTHER LEAK IN THE SYSTEM (LEAKING AIR BLADDERS, OR AIR LINES IN THE SYSTEM ARE LEAKING) IS CAUSING THE RMT PRODUCT TO FAIL CAUSING UNITS SUCH AS AN AIR SUSPENSION COMPRESSOR TO OVER WORK AND BURN OUT THE MOTOR. IMPROPER INSTALLATION OF THE PRODUCT. IMPROPER USE OF THE PART. NOT PROPERLY CONNECTING THE CONNECTORS, SUCH AS REVERSE POLARITY, WRONG PLUGS, AND AFTERMARKET PLUGS. FUSES BEING BLOWN / BURNT OUT DUE TO NOT REPLACING THE RELAY. ANY PART IN A PRODUCT OR ANY INGREDIENT CONTAINED IN A PRODUCT REQUIRES REPLACEMENT OR REPAIR THROUGH ROUTINE USAGE OR NORMAL WEAR AND TEAR 5. A PRODUCT IS NOT MAINTAINED OR USED IN ACCORDANCE WITH RMTS APPLICABLE OPERATING AND/OR MAINTENANCE MANUALS, WHETHER BY THE CUSTOMER OR ANY THIRD PARTY; 6. A PRODUCT HAS BEEN SUBJECT TO MISUSE, MISAPPLICATION, NEGLIGENCE, NEGLECT (INCLUDING, BUT NOT LIMITED TO, IMPROPER MAINTENANCE OR STORAGE), ACCIDENT, CATASTROPHE, IMPROPER INSTALLATION, MODIFICATION, ADJUSTMENT, REPAIR OR LUBRICATION, WHETHER BY THE CUSTOMER OR ANY THIRD PARTY, WITHOUT THE PRIOR WRITTEN CONSENT OF RMT. MISUSE SHALL INCLUDE, BUT NOT BE LIMITED TO, DETERIORATION IN A PRODUCT DUE TO CHEMICAL ACTION AND WEAR CAUSED BY THE PRESENCE OF ABRASIVE MATERIALS 7. THE SYSTEM INTO WHICH THE PRODUCT BECOMES INCORPORATED IS NOT COMPATIBLE WITH THE PRODUCT, OR IT IS NOT FREE FROM CRITICAL SPEED OR TORSIONAL OR OTHER TYPE OF VIBRATION WITHIN THE SPECIFIED OPERATING RANGE, NO MATTER HOW INDUCED; OR 8. MORE THAN TWO (2) MINUTES OF RUNTIME IS A SIGN OF OVER WORKING THE COMPRESSOR, RISKING IT TO BURN OUT. The part must be unused, in it’s original package (No wrapping or seals can be broken), and must be in re-sellable condition. This Listing is one of a few that has a Mandatory Core Deposit. We are a GREEN company and we do our best to Recycle. We will rebuild this part and help others like you. Thank you for Helping Us Recycle. Core Prices are subject to change due to supply and demand, condition and quantity of cores daily. 8AM to 6PM EST Monday-Friday. Great Service & Parts Quality Guaranteed! The item “Front OEM REBUILT Suspension Air Spring Struts SET Mercedes E350 E500 E550 W211″ is in sale since Thursday, April 10, 2014. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Suspension & Steering\Shocks & Struts”. The seller is “rebuildmastertech” and is located in Pompano Beach, Florida. This item can be shipped worldwide.

Country/Region of Manufacture: United States
Custom Bundle: Yes
Interchange Part Number: W211
Adjustable: Yes
Core Deposit: $150
Interchange Part Number 2: 2113205513, 2113206113, 2113205413, 2113206013
Interchange Part Number 3: A211 320 55 13, A211 320 61 13, A211 320 54 13, A211 320 60 13
Interchange Part Number 4: 211 320 55 13, 211 320 61 13, 211 320 54 13, 211 320 60 13
Kit or Single Part: Kit
Greasable or Sealed: Sealed
Manufacturer Part Number: M211-R310-RWFP
Part Type: Air Suspension Strut
Gas Charged Shock: Yes
Included Hardware: W211 Front Air Strut
Kit Parts Included: Air Shock
MPN: M211-R310-RWFP
OE Spec or Performance/Custom: OE Spec
Product Type: Air Struts
Placement on Vehicle: Left
Other Part Number: Struts, Shock, Springs, Bags, W211, E, Class
Brand: RMT
Fitment Type: Direct Replacement
Warranty: Lifetime
Bundle Description: Front Left, Right PAIR

Front Shocks Relocator Kit Universal Weld On Shock Mount Bracket & Hardware

February 24, 2021 admin

Front Shocks Relocator Kit Universal Weld On Shock Mount Bracket & Hardware

Universal Front Shock Relocation Kit With Shocks and Hardware. Allows for re-location of front shocks to the outside of the control arm when replacing from coil spring or torsion with air bags. The right to make changes in design or add to or improve on product without incurring any obligations to install the same on products previously manufactured is expressly reserved. All parts are aftermarket replacement parts. Unless specifically noted, no implication is made that these parts are the original car manufacturers’, are from the original suppliers, or are approved by them. Always utilize safety restrain systems while operating vehicle. Billet Adapters are intended to be used ONLY on a show vehicle, stylized for a special look and NOT intended to be used on long driving, freeway driving and every day driving. Under no circumstances will Phx Wheel Inc. Be liable to any party for any direct, indirect, special, incidental, consequential, or other damages based on any improper use.. It is up to the user and/or installer to determine fitness for any other application. Many of our products require fabrication skills to install and should only be installed by a qualified fabricator or mechanic. Product must be unused and in original boxes and packaging material. Or without a RA# will be refused. No claims will be accepted on parts that have been modified in any way. It is also the responsibility of the person installing any component or kit to determine the suitability of the components or kit for that particular application. Products are intended for off road and show use only. Always check with your local authorities for highway laws in your area because highway laws and the enforcement of those laws vary widely. The item “Front Shocks Relocator Kit Universal Weld On Shock Mount Bracket & Hardware” is in sale since Thursday, November 14, 2019. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Suspension & Steering\Shocks & Struts”. The seller is “wheelsnparts” and is located in Mesa, Arizona. This item can be shipped worldwide.

Interchange Part Number: upper tab relocation,air,ride,custom,suspension
Adjustable: Yes
Manufacturer Part Number: SHO-REL-FT
Part Type: Shock Mount Bracket
Included Hardware: Shock
Bundle Listing: Yes
Fit for: Universal
Type: Universal
Kit Parts Included: Shock
Connection Type: Weld-on
Placement on Vehicle: Left
Other Part Number: relocate shocks after air bag install
Brand: Weld Mount
Fitment Type: Performance/Custom
Warranty: 1 Year

Front Pair Suspension Air Springs Bags for 2006-2013 Range Rover Sport

February 10, 2021 admin

Front Pair Suspension Air Springs Bags for 2006-2013 Range Rover Sport

Brand New Front Air Ride Suspension Air Spring Bags. 2006 – 2013 Land Rover Range Rover Sport. EXCLUDES L322, MK-III, AND LM MODELS. Fitment Type: Direct Replacement / Gas Charged. ShockMasters is not only the #1 eCommerce store for vehicle suspension for many makes and models, but offers the best prices you can find online! Other stores offer tons of different products; we are focused only on suspension parts, making it easier to find parts you need at a price you can afford. If you have any questions, or just want a reliable part at an unbeatable price, ShockMasters is the store for you. The item “Front Pair Suspension Air Springs Bags for 2006-2013 Range Rover Sport” is in sale since Friday, June 8, 2018. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Suspension & Steering\Shocks & Struts”. The seller is “shock*masters” and is located in Delray Beach, Florida. This item can be shipped to United States, Canada.

Adjustable: Yes
Manufacturer Part Number: 34243
Placement on Vehicle: Left
Other Part Number: REB500060
Brand: Shock Masters
Warranty: 1 Year
Interchange Part Number: 2006 2007 2008 2009 2010 2011 2012 2013 Land Rover Range Rover
Interchange: REB500190,LR016403,LR018398,RNB501580,RNB501580,45-218644
Part Type: Air Suspension Spring Set
Fitment Type: Direct Replacement
Kit or Single Part: Kit

January 2025
M	T	W	T	F	S	S
« Dec
		1	2	3	4	5
6	7	8	9	10	11	12
13	14	15	16	17	18	19
20	21	22	23	24	25	26
27	28	29	30	31