Ekstensive Metal Works Rear 2-Link AirRide Suspension Bridge Notch 1985-05 S10

October 1, 2024 admin

Ekstensive Metal Works Rear 2-Link AirRide Suspension Bridge Notch 1985-05 S10

82-04 Rear Air Suspension Kit. Transform your truck with our complete rear air suspension kit designed for 82-04 models. This kit is designed to allow your truck to sit flush on the ground with 20-inch wheels. The centerpiece of this kit is our one-piece notch, which easily slips over the frame and requires welding for a secure fit. The notch comes with pre-welded upper shock mounts on its crossbars, simplifying the installation process. Once the notch is in place, you can cut the frame and use the included filler pieces to box the bottom, ensuring your truck is notched and ready for customization. Our kit includes 2-link bars that attach to your factory hangers and bolt to the rear end with the provided U-bolt kit. These bars already have the lower bag mounts pre-installed, so you don’t need to worry about complex setups. Use your factory U-bolt plates with their lower shock mounts, then weld on the upper bag mounts over the 2-link bar mounts to complete the airbag installation. Finally, the panhard bar installation is straightforward. The notch already has the frame mount, allowing you to bolt the panhard bar to the notch and then weld the axle mount. With these steps completed, your suspension system is ready for airbag installation. One-piece notch that slips over the frame for easy installation. Pre-welded upper shock mounts. 2-link bars with pre-installed lower bag mounts. U-bolt kit included for secure attachment. Upper bag mounts designed for quick setup. Ready for airbag installation to get your truck laid out with 20-inch wheels. Installation Note: This kit requires welding and is intended for experienced installers or professionals. Ensure proper safety measures and precautions are taken during installation.

Ekstensive Metal Works C10 Rear 2-Link Weld on Air Ride Suspension Kit 2600 Bags

July 28, 2024 admin

Ekstensive Metal Works C10 Rear 2-Link Weld on Air Ride Suspension Kit 2600 Bags

Our builder series rear weld on 2-link suspension kit with our partner Ekstensive Metal Works. Rear 2 Link bolts into the factory hangers and is designed specifically for the square body C10. Weld in rear 8 pcs notch and over the axle mounting brackets. Two C10 2 link bars with Urethane Bushings. One weld on panhard bar and brackets. One U-bolt kit with spring plates. One set of Over the Axle air bag brackets. One set of 8 pcs weld on 9 notch. Two Airmaxxx 2600 1/2 port air bags. See our other Ekstensive Metal Works Rear Kits.

Ekstensive Metal Works Rear Air Ride Suspension Kit Airbag shocks 88-98 GM C15

July 13, 2024 admin

Ekstensive Metal Works Rear Air Ride Suspension Kit Airbag shocks 88-98 GM C15

Ekstensive Rear 2-Link Kit with Air Bags and Shocks. It will fit 1/2 ton only. One piece of the notch slips over the frame and welds on, with the upper shock mounts pre-welded to the crossmember. Once installed, cut the frame and box with the filler pieces provided, and the truck is notched. Bolt the two link bars to the factory hangers, and then to the rear end with the u-bolt kit supplied. The lower bag mounts and shock mounts have already been installed on the bars, with a 2 block. To finish, the upper bag mounts are placed on a crossbar supplied, then welded. Lastly, the pan hard bar bolts to the notch frame mount and welds to the axle mount, and the suspension is air-bag-ready. Great Kit For Your 1988-98 Chevy/GMC 1500 2wd Truck. Valve Manifolds Use Less Fittings, Easier and Cleaner Install. Check Out In Stock Air Ride Kits or Message Us With Questions! Fits 2 Wheel Drive Models. 1988-98 Chevy 1500 Truck. (Requires Front Spring Pocket Trimming/Cutting). Ekstensive Metal Works Rear 2-Link and Notch Kit. (2) 2600 airmaxxx Air Bags. (2) Maxtrac Mono-Tube Gas Shocks.

Ekstensive Metal Works C10 Rear 2-Link Weld on Air Ride Suspension Kit

July 1, 2024 admin

Ekstensive Metal Works C10 Rear 2-Link Weld on Air Ride Suspension Kit

Ekstensive Metal Works C10 Rear 2-Link Weld on Air Ride Suspension Kit 2600 Bags

May 4, 2024 admin

Ekstensive Metal Works Rear 2-Link Weld on Air Ride Suspension Chevy 88-98 C15

April 29, 2024 admin

Ekstensive Metal Works Rear 2-Link Weld on Air Ride Suspension Chevy 88-98 C15

Our builder series rear weld on 2-link suspension kit with our partner Ekstensive Metal Works. Rear 2 Link bolts into the factory hangers and is designed specifically for the square body C10. Weld in rear 8 pcs notch and over the axle mounting brackets. Two C15 2 link bars with Urethane Bushings. One weld on panhard bar and brackets. One U-bolt kit with spring plates. One set of Over the Axle air bag brackets. One set of 8 pcs weld on 9 notch. Two airmaxxx 2600 Air Bags. See our other Ekstensive Metal Works Rear Kits.

Ekstensive Metal Works C10 Rear 2-Link Air Ride Suspension Kit Airmaxxx 2600

March 11, 2024 admin

Ekstensive Metal Works C10 Rear 2-Link Air Ride Suspension Kit Airmaxxx 2600

This 73-87 Rear Air Suspension Kit is designed exclusively to fit C10 Trucks with 24″ wheels, it can give your truck a “laid down look. The one-piece notch slips easily over the frame and welds in place, and comes pre-equipped with upper shock mounts on the crossbars. Completion of the customized lowering requires cutting the frame and box at the bottom and using the filler pieces supplied. The 2 link bars attach to factory hangers, and u-bolt the rear end. Lower bag mounts and lower shock mounts are already installed, and the upper bag mounts can be welded directly to the outside of the frame. Finally, the pan hard bar frame mount is already included on the notch, so you just attach and weld the axle mount, and your air bags will be ready to go. Kit includes everything you need to bag the rear of you C10.