Complete Air Ride Suspension Kit 3/8 Air Manifold Bags & Tank For 58-64 Impala

September 28, 2021 admin

Complete Air Ride Suspension Kit 3/8 Air Manifold Bags & Tank For 58-64 Impala

Bolt-On, Plug & Play With All The Wiring, Hose & Fittings. Complete Air Ride Suspension Kit. (see fitment guide above). Airmaxxx Front Bolt Air Bag Cups. Airmaxxx Rear Bolt on Air Bag Mounts. 4 – airmaxxx 2600 1/2 Port Air Bags. Airmaxxx Dual Chrome 480 Air Compressors. Airmaxxx Black 5 Gallon 7 Port Steel Air Tank. Airmaxxx 7 Switch Rocker Switch Bo. Airmaxxx 10Ft Extension Harness. EVOLVE 4-Corner Valve Manifold by AVS. 2 – AVS 3/8 Black Water Traps. 150 on-180 off Pressure Switch. 50ft 3/8 DOT Air Hose. Nickle Plated Brass PTC Fitting Kit. Air Hose Cutter &. Airmaxxx Dual Air Compressor Install Wiring Kit. The right to make changes in design or add to or improve on product without incurring any obligations to install the same on products previously manufactured is expressly reserved. All parts are aftermarket replacement parts. Unless specifically noted, no implication is made that these parts are the original car manufacturers’, are from the original suppliers, or are approved by them. Always utilize safety restrain systems while operating vehicle. Billet Adapters are intended to be used ONLY on a show vehicle, stylized for a special look and NOT intended to be used on long driving, freeway driving and every day driving. Under no circumstances will Phx Wheel Inc. Be liable to any party for any direct, indirect, special, incidental, consequential, or other damages based on any improper use.. It is up to the user and/or installer to determine fitness for any other application. Many of our products require fabrication skills to install and should only be installed by a qualified fabricator or mechanic. Product must be unused and in original boxes and packaging material. Or without a RA# will be refused. No claims will be accepted on parts that have been modified in any way. It is also the responsibility of the person installing any component or kit to determine the suitability of the components or kit for that particular application. Products are intended for off road and show use only. Always check with your local authorities for highway laws in your area because highway laws and the enforcement of those laws vary widely. The item “Complete Air Ride Suspension Kit 3/8 Air Manifold Bags & Tank For 58-64 Impala” is in sale since Monday, August 16, 2021. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Suspension & Steering\Lower Kits & Parts”. The seller is “airslamit” and is located in Mesa, Arizona. This item can be shipped worldwide.

Custom Bundle: Yes
Interchange Part Number: Gm passenger Cars GM B Platform
Adjustable: Yes
Manufacturer Part Number: K-IMP58-A580C2-57S-EVMV-X7-HF
Part Type: Suspension Lowering Hardware Kit
Included Hardware: Air Bag
Placement on Vehicle: Left
Other Part Number: Black Switch Box plug and play Air compressor
Brand: airmaxxx // Evolve by AVS
Fitment Type: Performance/Custom
Warranty: Unspecified Length
Bundle Description: Evolve Manifold Valve, airmaxxx Compressor with Wire install Kit, X7 Switch box w/9ft extension harness, Steel Tank and Airbags,, 3/8 Air Hose and Fitting Pack

Complete Airbag Suspension Kit LEVEL3, 65-72 Mercedes W108

September 19, 2021 admin

Complete Airbag Suspension Kit LEVEL3, 65-72 Mercedes W108

The W108 platform is a timeless classic, and they’re gaining popularity with collectors and customizers alike. So of course you want to be sure to keep the value of your ride as you modify it! We’ve carefully assembled this using the best components in the industry to make sure your car retains it’s value while giving you a slammed stance and a comfortable ride. Designed for easy installation, our mounting brackets require minimal cutting/drilling for installation, and your car can easily be reverted to stock with little indication it was ever modified, should you desire a fully-restored look later on. Here’s What’s Included. Slam Specialties RE Series Airbags: 7″ of travel, 1/2″ ports, 200 PSI burst rate (4 Included). AccuAir VU4 4-Way Valve Manifold: Compact design, easy installation, four corner independent control. Viair 380c Chrome Air Compressor Dual Pack: Includes (2) 200 PSI chrome air compressors, relays, pressure switch, and more! 28 Seamless Aluminum Air Tank: The perfect size for your ride. This seamless aluminum air tank waon’t corrode or rust, and comes with mounting brackets with feet for easy installation in your trunk. 50′ Roll of 3/8 DOT Approved Air Line. Brass DOT Approved PUSH-CONNECT Air Fittings: No leaks or failures with these quality parts! AVS-7 Switch Box: This handheld controller hides easily and fits nicely in the palm of your hand. Front Airbag Bracket Set: Designed to fit your factory spring pockets and lower control arms. Rear Airbag Bracket Set: Designed to fit your factory spring pockets and axle. Our LEVEL 3 kit builds upon LEVEL 2 system, but upgrades the individual air valves for an AccuAir VU4 manifold valve, for a simpler and more compact installation with less plumbing and wiring. We include complete installation guides for the installation of the airbags, as well as plumbing diagrams to make things as painless as possible. And of course, if you have any questions along the way, we’re always happy to help answer any questions that may come up! We’ve installed hundreds of air ride systems over the years, and we love hearing from our customers and seeing their projects come together. NOTE: The pictured car has had a couple of additional modifications to make it sit approximately 1” lower than this kit would normally allow. Notching the front control arms, installing shorter front shocks, and modification of the rear mounts will get you here without much trouble. The item “Complete Airbag Suspension Kit LEVEL3, 65-72 Mercedes W108″ is in sale since Wednesday, March 1, 2017. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Suspension & Steering\Lower Kits & Parts”. The seller is “bc_fab” and is located in Rancho Cordova, California. This item can be shipped worldwide.

Brand: BC Fabrication
Country/Region of Manufacture: United States
Manufacturer Part Number: BK600-3
OE Spec or Performance/Custom: Performance/Custom
Kit or Single Part: Kit
Warranty: 90 Day

Complete Air Suspension Kit 1965-1970 Cadillac DeVille LEVEL 4 with Air Lift 3P

September 18, 2021 admin

Complete Air Suspension Kit 1965-1970 Cadillac DeVille LEVEL 4 with Air Lift 3P

We’ve carefully assembled this kit using the best components in the industry to make sure your car retains it’s value while giving you a slammed stance and a comfortable ride. Designed for easy installation and made in-house, in the USA, our mounting brackets require minimal cutting and welding for installation, and your car can easily be reverted to stock with little indication it was ever modified, should you desire a fully-restored look later on. Air Lift Performance Dominator Airbags: 8″ of travel, 1/2″ ports, 600 PSI burst rate (four included). Viair 480C Chrome Compressor Dual Pack: Viair’s premier air compressor! Includes (2) 200 PSI chrome air compressors, relays, pressure switch, and more! 28 Seamless Aluminum Air Tank: The perfect size for your ride! This seamless aluminum air tank won’t corrode or rust, and it comes with mounting hardware for easy installation. 50′ Roll of 3/8 DOT Approved Air Line. Brass DOT Approved PUSH-CONNECT Air Fittings: No leaks or failures with these quality brass fittings! Front Airbag Bracket Set: Designed to fit your factory spring pockets and lower control arms. Rear Airbag Bracket Set: Designed to fit your factory spring pockets and axle. Our LEVEL 4 kit represents the way we’d build your ride if it was ours! In this case, Viair 480C air compressors and Air Lift Performance’s 3P automatic ride control, with everything else from the LEVEL 3 system carried over. We include guides for the installation of the airbags, as well as plumbing and wiring diagrams to make things as painless as possible. Feel free to ask any questions about putting this kit in and we’ll be happy to assist! We love hearing from our customers and seeing their projects come together. The item “Complete Air Suspension Kit 1965-1970 Cadillac DeVille LEVEL 4 with Air Lift 3P” is in sale since Monday, July 2, 2018. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Suspension & Steering\Lower Kits & Parts”. The seller is “bc_fab” and is located in Rancho Cordova, California. This item can be shipped worldwide.

Manufacturer Part Number: BK513-3P
Brand: BC Fabrication
Fitment Type: Performance/Custom
Included Hardware: (4) Air Lift Dominator Airbags
Warranty: 90 Day

Complete 1973-1987 C10 Air Ride Suspension System Kit

September 16, 2021 admin

Complete 1973-1987 C10 Air Ride Suspension System Kit

C10 Complete Air Ride Suspension System. DESIGNED BY TRUE SUSPENSION SIMPLE AND RELIABLE. Fits-1973 to 1987 Chevrolet GMC C10 Pickups. Set of Front Air Spring Mounts(weldon or bolt-on–drilling required to bolt-on). Set of Rear Air Spring Weld-on Mounts (upgraded to under & rear of axle lower mounts to maximize travel). Rear Tri-angulated Weld-on 4link Set-up (all mounting hardware included). (4) 2600 Series Air Springs. 1/3hp 100% Duty Cycle Compressor. Active Air Pneumatic(non-electric)Paddle Switch Controller with 150 Lighted psi gauge(White or Black face Gauge depending on stock). Control front to back motion slow and smoothly, Too simple! 120psi Pressure Switch(to maintain constant air). Roll of 50Ft 1/4Airhose. Complete 1/4tube fitting pack to connect(includes Drain plug for air tank). THIS IS ONE OF MANY AIR RIDE SUSPENSION KIT. SPECIALTY IS AFTERMARKET SUSPENSION! DESIGNED IN THE USA. WE SUGGEST A PROFESSIONAL INSTALLER TO PERFORM THE INSTALLATION OF THIS KIT. For an injury, loss, damage while installing this kit or use of this kit directly or indirectly. User assumes all responsibility in connection of this custom suspension kit and it’s appropriate use. The item “Complete 1973-1987 C10 Air Ride Suspension System Kit” is in sale since Monday, June 18, 2018. This item is in the category “eBay Motors\Parts & Accessories\Vintage Car & Truck Parts\Suspension & Steering”. The seller is “truesuspension” and is located in USA. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Mexico, New Zealand, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Panama, Jamaica, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman islands, Liechtenstein, Sri lanka, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Viet nam, Uruguay.

Country/Region of Manufacture: United States
Interchange Part Number: c10,rat rod, layframe, bagged, air suspension
Manufacturer Part Number: fb-c10-7387
Placement on Vehicle: Left
Other Part Number: fbss,lowering,fbss,dropped, hot rod, lowered
Brand: True Suspension
Warranty: 1 Year

Complete Universal Air Ride Suspension System Kit 2500 Series

September 6, 2021 admin

Complete Universal Air Ride Suspension System Kit 2500 Series

4 Corner Complete Air Ride Suspension System. DESIGNED BY TRUE SUSPENSION SIMPLE AND RELIABLE. Mounting brackets not included. We have many variations to match. Front Shock Relocation Kit includes upper mounts, lower mounting bolts. (2) gas charged shocks. (2) 2500 D2 Series Air Springs. (2) 2500 D1 Series Air Springs. 1/3hp 100% Duty Cycle Compressor. Active Air Pneumatic(non-electric)Paddle Switch Controller with 150 Lighted psi gauge(White or Black face Gauge depending on stock). Control front to back motion slow and smoothly, Too simple! 90-120psi Pressure Switch(to maintain constant air). Roll of 50Ft 1/4Airhose. Complete 1/4tube fitting pack to connect(includes Drain plug for air tank) Fittings may vary depending on stock. THIS IS ONE OF MANY AIR RIDE SUSPENSION KITS. SPECIALTY IS AFTERMARKET SUSPENSION! DESIGNED IN THE USA. WE SUGGEST A PROFESSIONAL INSTALLER TO PERFORM THE INSTALLATION OF THIS KIT. For an injury, loss, damage while installing this kit or use of this kit directly or indirectly. User assumes all responsibility in connection of this custom suspension kit and it’s appropriate use. The item “Complete Universal Air Ride Suspension System Kit 2500 Series” is in sale since Saturday, June 16, 2018. This item is in the category “eBay Motors\Parts & Accessories\Vintage Car & Truck Parts\Suspension & Steering”. The seller is “truesuspension” and is located in USA. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Mexico, New Zealand, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman islands, Liechtenstein, Sri lanka, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Viet nam, Uruguay.

Country/Region of Manufacture: United States
Interchange Part Number: universal,rat rod, layframe,bagged, air suspension
Manufacturer Part Number: fb-universal
Placement on Vehicle: Left
Other Part Number: fbss,lowering,fbss,dropped, hot rod, lowered
Brand: True Suspension
Warranty: 1 Year

Complete 1/2 Fast Valve Air Ride Suspension Kit 8 Gal Tank 1958-64 Chevy Cars

August 5, 2021 admin

Complete 1/2 Fast Valve Air Ride Suspension Kit 8 Gal Tank 1958-64 Chevy Cars

To See More Impala Kits. Complete 200psi Air Ride Kit. This Kit is Fast!! It Pops Up and Airs Out Twice as Fast. If Your are Searching For Slower Kit Look at our 3/8 Kit or Any of Our Systems With 3/8 Manifolds. (see fitment guide above). Also Available W/ AirLift Dominator or Slam Specialties Air Bags for More Lift. Message Us for Details. Airmaxxx Front Bolt on Air Bag Cups. Bolt on Air Bag Cups. Four – Aimaxxx 2600 1/2 Port Air Bags. Dual Airmaxxx Black 580 Air Compressors. Airmaxxx Black 8 Gallon 9 Port Steal Air Tank. Eight 1/2 Brass Valves w/ Mounting Brackets. (Mount Valves Close to the Air Bags for the Fastest Response). 50ft 1/2 DOT Air Hose. Nickle Plated Brass PTC Fitting Kit. We Will Also Include One – Airmaxxx Dual Air Compressor Install Wiring Kit This system is almost 100% Plug and Play (4 Gauge Main Power Wire and all Fuses and Connectors). The right to make changes in design or add to or improve on product without incurring any obligations to install the same on products previously manufactured is expressly reserved. All parts are aftermarket replacement parts. Unless specifically noted, no implication is made that these parts are the original car manufacturers’, are from the original suppliers, or are approved by them. Always utilize safety restrain systems while operating vehicle. Billet Adapters are intended to be used ONLY on a show vehicle, stylized for a special look and NOT intended to be used on long driving, freeway driving and every day driving. Under no circumstances will Phx Wheel Inc. Be liable to any party for any direct, indirect, special, incidental, consequential, or other damages based on any improper use.. It is up to the user and/or installer to determine fitness for any other application. Many of our products require fabrication skills to install and should only be installed by a qualified fabricator or mechanic. Product must be unused and in original boxes and packaging material. Or without a RA# will be refused. No claims will be accepted on parts that have been modified in any way. It is also the responsibility of the person installing any component or kit to determine the suitability of the components or kit for that particular application. Products are intended for off road and show use only. Always check with your local authorities for highway laws in your area because highway laws and the enforcement of those laws vary widely. The item “Complete 1/2 Fast Valve Air Ride Suspension Kit 8 Gal Tank 1958-64 Chevy Cars” is in sale since Saturday, January 2, 2021. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Suspension & Steering\Lower Kits & Parts”. The seller is “airslamit” and is located in Mesa, Arizona. This item can be shipped worldwide.

Custom Bundle: Yes
Interchange Part Number: Gm passenger Cars GM B Platform
Adjustable: Yes
Manufacturer Part Number: K-IMP58-A580C2-89-812-T7-HF
Part Type: Suspension Lowering Hardware Kit
Included Hardware: Front and Rear Mounting Brackets
Placement on Vehicle: Left
Other Part Number: Black Switch Box Air compressor
Brand: Airmaxxx Air Suspension
Fitment Type: Performance/Custom
Warranty: Unspecified Length
Bundle Description: airmaxxx Air bags & Bolt in Front and Rear Bracket, Compressor with install Wire Kit Steal Tank and Airbags, 1/2 Air Hose and Fitting Pack, AVS Toggle 7 switch box

Complete Air Ride Suspension Kit 1963-1972 Chevrolet C10 LEVEL 4 withAir Lift 3H

July 29, 2021 admin

Complete Air Ride Suspension Kit 1963-1972 Chevrolet C10 LEVEL 4 withAir Lift 3H

These C10 Pickups (as well as the Suburbans and Blazers) have gone WAY up in value over the past several years, and you want to be sure to keep its value as you modify it! We’ve carefully assembled this kit using the best components in the industry to make sure your truck retains its value while giving you a slammed stance and a comfortable ride. Designed for easy installation, and made in-house in the USA, our mounting brackets require ZERO cutting or welding for installation, and your truck can easily be reverted to stock with little indication it was ever modified, should you desire a fully-restored look later on. Air Lift Performance Dominator Airbags: 8″ of travel, 1/2″ ports, 600 PSI burst rate (four Included). Air Lift Performance’s 3H Ride Height Control System: Air Lift’s new 3H air management system, uses both height and pressure sensors to provide the most innovative air suspension control ever. The 3H system also features Air Lift’s new “Height Sensing Technology”, which allows the system to automatically adjust to changes in vehicle load. Includes 3H digital controller, integrated ECU + manifold, (4) height sensors with mounting hardware and all wiring, fuses, hardware, etc. Viair 480C Chrome Compressor Dual Pack: Viair’s premier air compressor! Includes (2) 200 PSI chrome air compressors, relays, pressure switch, and more! 28 Seamless Aluminum Air Tank: The perfect size for your ride! This seamless aluminum air tank won’t corrode or rust, and it comes with mounting hardware for easy installation. 50′ Roll of 3/8 DOT Approved Air Line. Brass DOT Approved PUSH-CONNECT Air Fittings: No leaks or failures with these quality brass fittings! Front Airbag Bracket Set: Designed to fit your factory spring pockets and lower control arms. Rear Airbag Bracket Set: Designed to fit your factory spring pockets and axle. Bolt-On Frame Notch Kit: This notch combined with a pair of lowering blocks, will give the rear of your truck an additional 2 drop, with no other modifications. Our LEVEL 4 kit represents the way we’d build your ride if it was ours! In this case, Viair 480C air compressors and Air Lift Performance’s 3H ride height control, with everything else from the LEVEL 3 system carried over. We include guides for the installation of the airbags, as well as plumbing and wiring diagrams to make things as painless as possible. Feel free to ask any questions about putting this kit in and we’ll be happy to assist! We love hearing from our customers and seeing their projects come together. The pictured truck has this system installed without a frame notch or drop spindles. When the system is dropped your rear axle will set on the frame, and the front will sit at nearly the same height. Adding a frame notch, lowering blocks, and drop spindles will drop you another 2+ inches without any major fabrication. Going lower will require some major work, though! The item “Complete Air Ride Suspension Kit 1963-1972 Chevrolet C10 LEVEL 4 withAir Lift 3H” is in sale since Wednesday, March 1, 2017. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Suspension & Steering\Lower Kits & Parts”. The seller is “bc_fab” and is located in Rancho Cordova, California. This item can be shipped worldwide.

Kit or Single Part: Kit
OE Spec or Performance/Custom: Performance/Custom
Country/Region of Manufacture: United States
Manufacturer Part Number: BK111-3H
Included Hardware: (4) Air Lift Performance Dominator Airbags
Brand: BC Fabrication
Fitment Type: Performance/Custom
Warranty: 90 Day

Complete Air Ride Suspension Kit For 63-72 C10 3/8 Manifold Bags Brackets & Tank

April 30, 2021 admin

Complete Air Ride Suspension Kit For 63-72 C10 3/8 Manifold Bags Brackets & Tank

To See More C10 Kits. Bolt-on and & Plug and Play With All The Wiring, Hose and Fittings Needed. (see fitment guide above). Airmaxxx Front Bolt Air Bag Cups. Airmaxxx Rear Bolt on Air Bag Mounts. Four – Aimaxxx 2600 1/2 Port Air Bags. Evolve Manifold Valve By AVS. Dual Airmaxxx Dual Black 580 Air Compressors. Airmaxxx Black 5 Gallon 7 Port Steel Air Tank. Airmaxxx 7 Switch Controller. Airmaxxx 10ft Controller to Valve Harness. 50ft 3/8 DOT Air Hose. Nickle Plated Brass PTC Fitting Kit. We Will Also Include One – Airmaxxx Dual Air Compressor Install Wiring Kit. This system is almost 100% Plug and Play (4 Gauge Main Power Wire and all Fuses and Connectors). The right to make changes in design or add to or improve on product without incurring any obligations to install the same on products previously manufactured is expressly reserved. All parts are aftermarket replacement parts. Unless specifically noted, no implication is made that these parts are the original car manufacturers’, are from the original suppliers, or are approved by them. Always utilize safety restrain systems while operating vehicle. Billet Adapters are intended to be used ONLY on a show vehicle, stylized for a special look and NOT intended to be used on long driving, freeway driving and every day driving. Under no circumstances will Phx Wheel Inc. Be liable to any party for any direct, indirect, special, incidental, consequential, or other damages based on any improper use.. It is up to the user and/or installer to determine fitness for any other application. Many of our products require fabrication skills to install and should only be installed by a qualified fabricator or mechanic. Product must be unused and in original boxes and packaging material. Or without a RA# will be refused. No claims will be accepted on parts that have been modified in any way. It is also the responsibility of the person installing any component or kit to determine the suitability of the components or kit for that particular application. Products are intended for off road and show use only. Always check with your local authorities for highway laws in your area because highway laws and the enforcement of those laws vary widely. The item “Complete Air Ride Suspension Kit For 63-72 C10 3/8 Manifold Bags Brackets & Tank” is in sale since Tuesday, June 30, 2020. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Suspension & Steering\Lower Kits & Parts”. The seller is “airslamit” and is located in Mesa, Arizona. This item can be shipped worldwide.

Custom Bundle: Yes
Interchange Part Number: Front Rear airride system bundle
Adjustable: Yes
Manufacturer Part Number: K-GM63-A580B2-57S-EVMV-X7-HF
Part Type: Suspension Lowering Hardware Kit
Included Hardware: Front and Rear Mounting Brackets
Placement on Vehicle: Left
Other Part Number: Black Switch Box plug and play Air compressor
Brand: Airmaxxx // AVS Evolve
Fitment Type: Performance/Custom
Warranty: Unspecified Length
Bundle Description: Evolve Manifold Valve, airmaxxx Compressor with install Kit Steel Tank and Airbags, X7 switch box with 10 ft harness 3/8 Air Hose and Fitting Pack, (2) AVS Water Traps

Complete Air Ride Suspension Kit 1977-1984 Cadillac DeVille LEVEL 1 1/4

April 25, 2021 admin

Complete Air Ride Suspension Kit 1977-1984 Cadillac DeVille LEVEL 1 1/4

You just can’t beat a Cadillac, the long low styling is elegant, and the luxury is unmatched. We’ve carefully assembled this kit using the best components in the industry to make sure your car retains it’s value while giving you a slammed stance and a comfortable ride. Designed for easy installation and made in-house, in the USA, our mounting brackets require minimal modifications for installation, and your car can easily be reverted to stock with little indication it was ever modified, should you desire a fully restored look later on. Air Lift Performance Dominator Airbags: 8″ of travel, 1/2″ ports, 600 psi burst rate (four included). Stainless Steel Control Panel w/ 2 Dual Needle Gauges & 4 Manual Control Valves: Compact design, easy installation, four corner independent control. Viair 480C Chrome Air Compressor: Viair’s premier air compressor! Includes (1) 200 PSI chrome air compressor, relay, pressure switch, and more! 28 Seamless Aluminum Air Tank: The perfect size for your ride! This seamless aluminum air tank won’t corrode or rust, and it comes with mounting brackets for easy installation. 100′ Roll of 1/4 DOT Approved Air Line. Brass DOT Approved PUSH-CONNECT Air Fittings: No leaks or failures with these quality brass fittings! Watch out for inferior kits looking to save a buck by sending you plastic non-DOT fittings! Front Airbag Bracket Set: Designed to fit your factory spring pockets and lower control arms. Rear Airbag Bracket Set: Designed to fit your factory spring pockets and axle. This system is designed for simplicity over speed, the manual valves will lift or lower your ride in around 7-8 seconds. If you’re looking for something faster, we have electric systems available as well, but this kit is designed for people that want to set their height and cruise! We include guides for the installation of the airbags, as well as plumbing and wiring diagrams to make things as painless as possible. Feel free to ask any questions about putting this kit in and we’ll be happy to assist! We love hearing from our customers and seeing their projects come together. The item “Complete Air Ride Suspension Kit 1977-1984 Cadillac DeVille LEVEL 1 1/4″ is in sale since Thursday, August 23, 2018. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Suspension & Steering\Lower Kits & Parts”. The seller is “bc_fab” and is located in Rancho Cordova, California. This item can be shipped worldwide.

Country/Region of Manufacture: United States
Manufacturer Part Number: BK525-1
Included Hardware: (4) Air Lift Dominator Airbags
Brand: BC Fabrication
Fitment Type: Performance/Custom
Warranty: 90 Day

Complete 3 Preset Pressure Level Ride Air Suspension Kit 63-72 C10 480 airmaxxx

April 20, 2021 admin

Complete 3 Preset Pressure Level Ride Air Suspension Kit 63-72 C10 480 airmaxxx

To See More C10 Kits. Bolt-on and & Plug and Play With All The Wiring, Hose and Fittings Needed. Hand Free Voice Commands. Bluetooth Control up to 100ft away. Touch Screen Wireless Controller. (see fitment guide above). Level Ride Pressure Only With Controller. Level Ride 3/8 Manifold Valve. Airmaxxx Front Bolt Air Bag Cups. Airmaxxx Rear Bolt on Air Bag Mounts. Four – Aimaxxx 2600 1/2 Port Air Bags. Dual Airmaxxx Dual Black 480 Air Compressors. Airmaxxx Black 5 Gallon 7 Port Seamless Aluminum Air Tank. 50ft 3/8 DOT Air Hose. Nickle Plated Brass PTC Fitting Kit. We Will Also Include One – Airmaxxx Dual Air Compressor Install Wiring Kit. This system is almost 100% Plug and Play (4 Gauge Main Power Wire and all Fuses and Connectors). The right to make changes in design or add to or improve on product without incurring any obligations to install the same on products previously manufactured is expressly reserved. All parts are aftermarket replacement parts. Unless specifically noted, no implication is made that these parts are the original car manufacturers’, are from the original suppliers, or are approved by them. Always utilize safety restrain systems while operating vehicle. Billet Adapters are intended to be used ONLY on a show vehicle, stylized for a special look and NOT intended to be used on long driving, freeway driving and every day driving. Under no circumstances will Phx Wheel Inc. Be liable to any party for any direct, indirect, special, incidental, consequential, or other damages based on any improper use.. It is up to the user and/or installer to determine fitness for any other application. Many of our products require fabrication skills to install and should only be installed by a qualified fabricator or mechanic. Product must be unused and in original boxes and packaging material. Or without a RA# will be refused. No claims will be accepted on parts that have been modified in any way. It is also the responsibility of the person installing any component or kit to determine the suitability of the components or kit for that particular application. Products are intended for off road and show use only. Always check with your local authorities for highway laws in your area because highway laws and the enforcement of those laws vary widely. The item “Complete 3 Preset Pressure Level Ride Air Suspension Kit 63-72 C10 480 airmaxxx” is in sale since Sunday, May 3, 2020. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Suspension & Steering\Lower Kits & Parts”. The seller is “airslamit” and is located in Mesa, Arizona. This item can be shipped worldwide.

Custom Bundle: Yes
Interchange Part Number: Front Rear airride system bundle
Adjustable: Yes
Manufacturer Part Number: K-GM63-A480B2-57ABLK-SV8C-LRPO-HF
Part Type: Suspension Lowering Hardware Kit
Included Hardware: Front and Rear Mounting Brackets
Placement on Vehicle: Left
Other Part Number: Black Switch Box plug and play Air compressor
Brand: Airmaxxx // Level Ride Suspension
Fitment Type: Performance/Custom
Warranty: Unspecified Length
Bundle Description: Level Ride Pressure Only Bluetooth Controller and Manifold, airmaxxx Compressor with install Wire Kit Seamless Tank and Airbags, 3/8 Air Hose and Fitting Pack,

March 2025
M	T	W	T	F	S	S
« Feb
					1	2
3	4	5	6	7	8	9
10	11	12	13	14	15	16
17	18	19	20	21	22	23
24	25	26	27	28	29	30
31