FastBag Air Ride Suspension System. With Full 4 Corner Independent Corner Control. This is a Fast Kit!! Gives the “Pop” Inflate/Deflate Feel. Also Available in Faster 1/2 Kit Or Check Out Our Plug & Play Kits. 1992 – 1999 Chevrolet / GMC. It will fit 1/2 ton only. One piece of the notch slips over the frame and welds on, with the upper shock mounts pre-welded to the crossmember. Once installed, cut the frame and box with the filler pieces provided, and the truck is notched. Bolt the two link bars to the factory hangers, and then to the rear end with the u-bolt kit supplied. The lower bag mounts and shock mounts have already been installed on the bars, with a 2 block. To finish, the upper bag mounts are placed on a crossbar supplied, then welded. Lastly, the pan hard bar bolts to the notch frame mount and welds to the axle mount, and the suspension is air-bag-ready. Air Ride Suspension Kit. Airmaxxx Front Bolt On Air Bag Cups. Airmaxxx Rear Weld On Air Bag Mounts. Ekstenisve Metal Works Rear Suspension Kit. (4) airmaxxx 2600, 1/2npt Port Air Bags. Airmaxxx Black 480 Air Compressors. Airmaxxx Dual Air Compressor Wiring Kit. 150 on – 180 off Pressure Switch. Airmaxxx Black 5 Gallon 9 Port Steel Air Tank. (8) 3/8 Fast Flow Brass Valves w/Mounts. Airmaxxx Switch Hand Held Controller. Airmaxxx 9FT Extension Harness. 50ft 3/8 DOT Air Hose. Nickle Plated Brass Camozzi PTC Fitting Kit. Air Hose Cutter &. Airmaxxx 3/8 Water Traps. (4) 1/2 Element Filter. All Fittings, Hose, Drains, Filter, Fuse and Connections Are Included.