Air Lift Load Support Suspension Air Bags Manual Air Management Kit W Viair 444C

Air Lift Load Support Suspension Air Bags Manual Air Management Kit W Viair 444C
Air Lift Load Support Suspension Air Bags Manual Air Management Kit W Viair 444C
Air Lift Load Support Suspension Air Bags Manual Air Management Kit W Viair 444C
Air Lift Load Support Suspension Air Bags Manual Air Management Kit W Viair 444C
Air Lift Load Support Suspension Air Bags Manual Air Management Kit W Viair 444C
Air Lift Load Support Suspension Air Bags Manual Air Management Kit W Viair 444C
Air Lift Load Support Suspension Air Bags Manual Air Management Kit W Viair 444C
Air Lift Load Support Suspension Air Bags Manual Air Management Kit W Viair 444C
Air Lift Load Support Suspension Air Bags Manual Air Management Kit W Viair 444C
Air Lift Load Support Suspension Air Bags Manual Air Management Kit W Viair 444C
Air Lift Load Support Suspension Air Bags Manual Air Management Kit W Viair 444C
Air Lift Load Support Suspension Air Bags Manual Air Management Kit W Viair 444C
Air Lift Load Support Suspension Air Bags Manual Air Management Kit W Viair 444C

Air Lift Load Support Suspension Air Bags Manual Air Management Kit W Viair 444C
1832 Lone Star Rd, Mansfield, TX 76063. Brand New UN-used Basic Manual Paddle Valve Air Management kit for Air Lift Load Support, Helper Air Springs 1/8 NPT (Port). The basic manual air management kit comes with Viair 444C Single Chrome OR Black Air Compressor, 2 Gallon 6 Port Steel Air Tank, Air Lift 26161 Manual Paddle Valve Gauge Panel with 200 PSI Gauge, DOT Airline & All Fittings. Just run 1/4 OD Airline from tank to slide over the barbed Union tee fitting on the gauge panel (Supply Port). 17.75″ L X 6.0″ DIA X 8.25 H (451MM X 152.40 MM X 209.55 MM). Port Size & Port Locations. (4) 3/8″ NPT Ports, One on each end caps, (2) on tank body/face, (2) 1/4″ NPT Ports (1) on top & (1) on bottom Center. All Push To Connect Fittings in this kit are ASCO Numatics Brand with 450 PSI Max. Kit does not come with any wiring supplies for the air compressor & Gauge Backlight. Load Support Bags / Helper Air Springs not Included. This 1/4 air management kit is customized to work with any Air Lift Load Support / Helper Air Spring Kit. We may customize some PTC fittings, based on availability. Without affecting the functionality of this kit. Viair 444C Chrome OR Black Air Compressor – 200 PSI. Air Lift 26161 P/N Manual Paddle Valve Gauge Panel with 200 PSI Single Needle Air Gauge. 2 Gallon 6 Port Steel Air Tank – Black Powder Coated. 50 Feet of 1/4 OD DOT Brake Hose/ Airline. 90 PSI ON 120 PSI OFF Pressure Switch. 40 AMP Heavy Duty Relay. (1) 1/4″ X 1/8″ Brass Reducer Bushing. (1) 3/8″ X 1/4″ Brass Reducer Bushing. (2) 3/8 Hex Brass Plugs. (1) 1/4 NPT Drain Cock. (1) 1/4″ PTC X 3/8″ NPT 90 Degree Swivel Elbow. (2) 1/4 PTC X 1/8 NPT 90 Degree Swivel Elbows. (1) 1/4 PTC Union Tee. This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to.
Air Lift Load Support Suspension Air Bags Manual Air Management Kit W Viair 444C

Viair 444C Air Lift Load Support Suspension Air Bags Manual Air Management Kit

Viair 444C Air Lift Load Support Suspension Air Bags Manual Air Management Kit
Viair 444C Air Lift Load Support Suspension Air Bags Manual Air Management Kit
Viair 444C Air Lift Load Support Suspension Air Bags Manual Air Management Kit
Viair 444C Air Lift Load Support Suspension Air Bags Manual Air Management Kit
Viair 444C Air Lift Load Support Suspension Air Bags Manual Air Management Kit
Viair 444C Air Lift Load Support Suspension Air Bags Manual Air Management Kit
Viair 444C Air Lift Load Support Suspension Air Bags Manual Air Management Kit
Viair 444C Air Lift Load Support Suspension Air Bags Manual Air Management Kit
Viair 444C Air Lift Load Support Suspension Air Bags Manual Air Management Kit
Viair 444C Air Lift Load Support Suspension Air Bags Manual Air Management Kit
Viair 444C Air Lift Load Support Suspension Air Bags Manual Air Management Kit
Viair 444C Air Lift Load Support Suspension Air Bags Manual Air Management Kit
Viair 444C Air Lift Load Support Suspension Air Bags Manual Air Management Kit

Viair 444C Air Lift Load Support Suspension Air Bags Manual Air Management Kit
1832 Lone Star Rd, Mansfield, TX 76063. Brand New UN-used Basic Manual Paddle Valve Air Management kit for Air Lift Load Support, Helper Air Springs 1/8 NPT (Port). The basic manual air management kit comes with Viair 444C Single Chrome OR Black Air Compressor, 2 Gallon 6 Port Steel Air Tank, Air Lift 26161 Manual Paddle Valve Gauge Panel with 200 PSI Gauge, DOT Airline & All Fittings. Just run 1/4 OD Airline from tank to slide over the barbed Union tee fitting on the gauge panel (Supply Port). Slide airline on the barbed fitting. 17.75″ L X 6.0″ DIA X 8.25 H (451MM X 152.40 MM X 209.55 MM). Port Size & Port Locations. (4) 3/8″ NPT Ports, One on each end caps, (2) on tank body/face, (2) 1/4″ NPT Ports (1) on top & (1) on bottom Center. All Push To Connect Fittings in this kit are ASCO Numatics Brand with 450 PSI Max. Kit does not come with any wiring supplies for the air compressor & Gauge Backlight. Load Support Bags / Helper Air Springs not Included. This 1/4 air management kit is customized to work with any Air Lift Load Support / Helper Air Spring Kit. We may customize some PTC fittings, based on availability. Without affecting the functionality of this kit. Viair 444C Chrome OR Black Air Compressor – 200 PSI. Air Lift 26161 P/N Manual Paddle Valve Gauge Panel with 200 PSI Single Needle Air Gauge. 2 Gallon 6 Port Steel Air Tank – Black Powder Coated. 50 Feet of 1/4 OD DOT Brake Hose/ Airline. 90 PSI ON 120 PSI OFF Pressure Switch. 40 AMP Heavy Duty Relay. (1) 1/4″ X 1/8″ Brass Reducer Bushing. (1) 3/8″ X 1/4″ Brass Reducer Bushing. (2) 3/8 Hex Brass Plugs. (1) 1/4 NPT Drain Cock. (1) 1/4″ PTC X 3/8″ NPT 90 Degree Swivel Elbow. (2) 1/4 PTC X 1/8 NPT 90 Degree Swivel Elbows. (1) 1/4 PTC Union Tee. This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to.
Viair 444C Air Lift Load Support Suspension Air Bags Manual Air Management Kit

Viair 444c Dual Pack Stealth Black Air Ride Suspension Compressor On Board Air

Viair 444c Dual Pack Stealth Black Air Ride Suspension Compressor On Board Air
Viair 444c Dual Pack Stealth Black Air Ride Suspension Compressor On Board Air
Viair 444c Dual Pack Stealth Black Air Ride Suspension Compressor On Board Air
Viair 444c Dual Pack Stealth Black Air Ride Suspension Compressor On Board Air

Viair 444c Dual Pack Stealth Black Air Ride Suspension Compressor On Board Air
Take your ride to the next level with this VIAIR 444C Dual Pack STEALTH BLACK Air Ride Bag Suspension Compressor On Board Air system. The included hardware, air bag, and chrome surface finish make for an eye-catching addition to your vehicle. (2) 444C (Chrome or Stealth Black) Air Compressors w/Thermal Overload Protectors. Intercooler Head (Patents Pending). (2) Air Filter Assemblies. (2) Remote Mount Brackets. (2) Sets of Remote Mount Fittings. (2) Sets of Spare Air Filter Elements. (8) Sets of Nuts, Bolts, Washers and Lock Washers. (2) Stainless Steel Braided Leader Hoses with Inline Check Valve. (6) Airline Clips with Included Hardware. Permanent Magnetic Motor. Working Pressure: 200 PSI. Air Tank Size: 10.0 Gallon. Max Ambient Temp: +158°F. Min Ambient Temp: -40°F. Dimensions: 10.87? L x 4.2? W x 7.06? H (Each Unit). Net Weight: 21.60 lbs. Use thread sealant for proper installation. Thread tape is not recommended. Properly sealed, recommended torque for 1/8 is 10 11 ft. Recommended torque for 1/4″ and 3/8″ is 16 18 ft. Supply Voltage: 13.8 Volts. 2.5 GALLON TANK. 0 to 200 PSI. 165 to 200 PSI. 5.0 GALLON TANK.
Viair 444c Dual Pack Stealth Black Air Ride Suspension Compressor On Board Air

VIAIR 444C DUAL Pack Chrome Compressors Air Bag Air Ride Suspension 44432

VIAIR 444C DUAL Pack Chrome Compressors Air Bag Air Ride Suspension 44432

VIAIR 444C DUAL Pack Chrome Compressors Air Bag Air Ride Suspension 44432
Awesome Service – See Our Ratings. 444C DUAL Pack Chrome Compressors Air Bag Air Ride Suspension. All 444C compressors feature a head assembly that includes a newly-developed, patents pending intercooler head. Additionally, they are equipped with a stainless steel braided leader hose with inline check valve assembly that serves to protect the compressor by eliminating the possibility of high amperage restarts. (2) 444C Chrome Compressors. Intercooler Head (Patents Pending). (2) Air Filter Assemblies. (2) Remote Mount Brackets. (2) Sets of Remote Mount Fittings. (2) Sets of Spare Air Filter Elements. (8) Sets of Nuts, Bolts, Washers and Lock Washers. (2) Stainless Steel Braided Leader Hoses with Inline Check Valve. (6) Airline Clips with Included Hardware.
VIAIR 444C DUAL Pack Chrome Compressors Air Bag Air Ride Suspension 44432

Viair 444c Dual Pack Chrome Air Ride Bag Suspension Compressor Pump Train Rod

Viair 444c Dual Pack Chrome Air Ride Bag Suspension Compressor Pump Train Rod
Viair 444c Dual Pack Chrome Air Ride Bag Suspension Compressor Pump Train Rod
Viair 444c Dual Pack Chrome Air Ride Bag Suspension Compressor Pump Train Rod

Viair 444c Dual Pack Chrome Air Ride Bag Suspension Compressor Pump Train Rod
VIAIR 444C DUAL PACK CHROME AIR RIDE BAG SUSPENSION COMPRESSOR PUMP TRAIN ROD. This is for a Viair 444c Chrome Compressor dual pack. These compressors are an Excellent choice for Air Horns, Filling up tires and Custom Air Suspension. VIAIR’s 444C Dual Performance Value Pack air compressors feature a newly-developed head assembly, with a patent pending intercooler head, and is capable of a maximum 200 PSI with a 100% duty cycle to power an air suspension system or any other application you may have. The 444C Dual Performance Value Pack includes two 12-volt Chrome or Stealth Black VIAIR 444C air compressors, which are also equipped with a stainless steel braided leader hose with an inline check valve. Note: Use thread sealant for proper installation. Teflon tape is not recommended. Properly sealed, recommended torque is 12 to 15 ft. Working Pressure: 200 PSI- Max. Air Tank Size: 10.0 Gallon- Max. L x 4.2? W x 7.06? H (Each Unit)- Net Weight: 21.60 lbs. PERFORMANCE DATAPSICFMABARLPMA03.53250100.025103.25271.088.529202.97312.081.333302.86333.075.634402.72344.070.636502.58355.065.537602.47366.059.039702.35377.053.140802.19388.047.739902.03399.043.2391001.904010.038.8381101.744011.034.7371201.653912.030.6361301.533913.025.8341401.413814.023.8331501.32381601.22371701.13361801.00351900.89342000.8533 Supply Voltage: 13.8 VoltsFILL RATES2.5 Gallon TankFill Rate0 to 200 PSI2 min. 165 to 200 PSI46 sec. 5.0 Gallon TankFill Rate0 to 200 PSI5 min. 165 to 200 PSI1 min. With In House Custom Metal Works; CAD Drawings, CNC Plasma Cutting, Plate braking, MIG & TIG Welding, Tube Bending, and other Metal Art finishing processes, our production options are near endless. We use these products everyday on our own vehicles, so we know you are getting a quality part! Built by mini truckers for mini truckers! Thank you for your interest, business, and support! (2) 444C (Chrome or Stealth Black) Air Compressors. Intercooler Head (Patents Pending). (2) Air Filter Assemblies. (2) Remote Mount Brackets. (2) Sets of Remote Mount Fittings. (2) Sets of Spare Air Filter Elements. (8) Sets of Nuts, Bolts, Washers and Lock Washers. (2) Stainless Steel Braided Leader Hoses with Inline Check Valve. (6) Airline Clips with Included Hardware. Permanent Magnetic Motor. Working Pressure: 200 PSI. Air Tank Size: 10.0 Gallon. 12V Amp Draw: 40 Amps. Dimensions: 10.87? Net Weight: 21.60 lbs. Supply Voltage: 13.8 Volts. 2.5 Gallon Tank. 0 to 200 PSI. 165 to 200 PSI. 5.0 Gallon Tank. Illusive Design & Fabrications specializes in Air Ride Suspensions, and Metal Fabrication. The free listing tool. This item is in the category “eBay Motors\Parts & Accessories\Performance & Racing Parts\Auto Performance Parts\Chassis, Suspension & Brakes\Lower Kits & Parts”. The seller is “illusivedf” and is located in this country: US. This item can be shipped to United States, Canada.
  • Interchange Part Number: Slam Specialties, Air Lift, AVS, airmax,
  • Other Part Number: 480, 48012, 44432, 380c, 38033, 48032, ob2
  • Surface Finish: chrome
  • UPC: 818114004445
  • Warranty: Yes
  • Non-Domestic Product: No
  • Brand: VIAIR
  • Gas Charged Shock: No
  • Fitment Type: Performance/Custom
  • Manufacturer Part Number: 44432
  • Greasable or Sealed: Sealed
  • Drop Length: 4in.
  • Adjustable: Yes
  • Placement on Vehicle: Front
  • Performance Part: Yes
  • Part Type: Axle Flip Kit

Viair 444c Dual Pack Chrome Air Ride Bag Suspension Compressor Pump Train Rod

Viair 444C Single CHROME Front & Back Manual Air Ride Kit For 1/2 NPT Bags

Viair 444C Single CHROME Front & Back Manual Air Ride Kit For 1/2 NPT Bags

Viair 444C Single CHROME Front & Back Manual Air Ride Kit For 1/2 NPT Bags
Add to Favorite Sellers. AIR GAUGES & GAUGE PANELS. COMPLETE AIR RIDE KITS. COMPLETE BRACKET & BAGS KITS. FITTINGS & FLOW CONTROLS. ONBOARD & AIR SOURCE KITS. SWITCHES & SWITCH BOXES. Viair 444c single chrome basic front & back manual air ride suspension kit for 1/2″ npt air bags – comes with air lift 26229 manual paddle switch gauge panel, 2 gallon 6 port air tank with airline & fittings for 1/2″ npt port air bags. Note: air bags not included. 1832 Lone Star Rd, Mansfield, TX 76063. Brand new Basic Kit Valve kit for 1/2 NPT Bags. This kit will work only with 1/2 NPT Bags. This kit can be used as a very basic air bag install on your vehicle without the need of solenoid valves. This is bare minimum Air Suspension kit. All you need is Air Bags with 1/2 NPT ports and bag brackets to finish your install. This kit can be used as a simulation to check the ride height before installing a full kit. This kit can be used for front and rear bags. Each bag will be inflated or deflated with one manual Paddle switch. Just add Tank and compressor to finish the basic install. Ideal for Load support as well as Low Rider Applications. Only for 1/2 NPT Single Port Air Bags! This Kit will come with following items. (1) Air Lift 26229 Dual Manual Paddle Switch Gauge Panel (With Pre-Fitted Fittings) – (1) 2 Gallon 6 Port Tank (4 3/8″ NPT Ports & 2 1/4″ NPT Ports) – (1) Viair 444C CHROME Compressor with 40 AMP Relay and 165/200 PSI Pressure Switch – (50) FT of 1/4″ OD Airline (SMC Brand) – (4) 1/2″ X 1/4″ Reducer Bushings for Bags – (5) 90 Degree Swivel Elbows for 1/4″ OD Airline – (2) 1/4 PTC union Tee’s (All Sides) PTC. (2) 3/8″ X 1/4″ Reducer. (1) 1/4″ NPT Drain Valve – (1) 3/8″ X 1/8″ Reducer Bushing – (1) 1/4″ Hex Plugs. Permanent Magnetic Motor. Duty Cycle: 100% AT 100 PSI (50% AT 200 PSI). Working Pressure: 200 PSI. Air Tank : 5 Gallon. 12V AMP Draw: 23 AMP. 444C Single CHROME Compressor. With Thermal Overload Protectors. 1 Filter Assembly with 2 Spare Filter Elements. 1 Set of Remote Filter Fittings. (4) Sets of Nuts, Bolts, Washers & Lock Washers. 1 Stainless Steel Braided Hose. 3 Airline Clips. 2 Gallon 6 Port Steel Tank – Comes with Mounting Hardware. 4 (3/8) Ports One on Each, 2 on Tank Face. 2 1/4 NPT Ports One Top & One Bottom. 17.75″ L X 6.0″ DIA X 8.25 H. 200 PSI Max. 200 PSI Dual Needle Gauge Panel with Back Light, with 1/4″ OD Airline Fittings on the back (Pre-installed) – 10-12 Sec Lift Speed and 6-8 Sec Drop Speed – Mechanical Paddle Valves with return to center position feature – Pre-installed Fitting Connection for easy plumbing – Air Escape through the side with minimum noise – Control Each Corner (2 Panels) or Front & Back with Union Tee’s in between Bag lines – Can be used for load support bags – 7″ Long at mounting lip, 5.5″ long at the front panel, 3″ Wide with approx 2.75 long Gauge Body. WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. NO PO Box only to physical addresses in 48 states in USA. Newmatics Inc is a family owned company, established in 2008. We are authorized dealer for all major Air Suspension companies in USA. We sell only major brand name authentic, 100% genuine parts. We are located at 1832 Lone Star Rd, Mansfield, TX 76063. We will answer your question or concern within 24 hours. International Customers (including Mexico & Canada) – Please Note. We cannot under-value merchandise or mark the items as a gift on custom forms & Invoices. This is against US and international laws. Please make sure, your address information is correct and up to date. All return items must be authorized and approved by us. Your feedback is very important for us. We will definitely resolve it. You can leave us a voice message, someone from our staff will get back to you same day or within 24 hours regarding the help and assistance needed. This item is in the category “eBay Motors\Parts & Accessories\Performance & Racing Parts\Auto Performance Parts\Chassis, Suspension & Brakes\Lower Kits & Parts”. The seller is “newmatics” and is located in this country: US. This item can be shipped worldwide.
  • Modified Item: No
  • Country/Region of Manufacture: United States
  • Custom Bundle: Yes
  • Manufacturer Part Number: BASIC-444CH-12
  • Included Hardware: Tank Mounting Hardware- Nuts, Botls & Washers, Mounting Hardware
  • Surface Finish: BLACK & CHROME
  • Placement on Vehicle: Left, Right, Rear, Upper, Lower
  • Brand: Viair
  • Non-Domestic Product: No
  • Warranty: 1 Year
  • Bundle Description: Viair 444C Compressor, 2 Gallon Air Tank, Air Lift 26229 Manual Paddle Gauge Panel, DOT Airline, Pressure Switch, 40 AMP Relay & Fittings For Kit

Viair 444C Single CHROME Front & Back Manual Air Ride Kit For 1/2 NPT Bags

Viair 444C Single Black Basic Front Back Manual Kit For 1/2 NPT Bags Air Ride

Viair 444C Single Black Basic Front Back Manual Kit For 1/2 NPT Bags Air Ride

Viair 444C Single Black Basic Front Back Manual Kit For 1/2 NPT Bags Air Ride
Add to Favorite Sellers. AIR GAUGES & GAUGE PANELS. COMPLETE AIR RIDE KITS. COMPLETE BRACKET & BAGS KITS. FITTINGS & FLOW CONTROLS. ONBOARD & AIR SOURCE KITS. SWITCHES & SWITCH BOXES. VIAIR 444C BLACK” SINGLE AIR COMPRESSOR BASIC MANUAL KIT FOR 1/2″ NPT AIR BAGS WITH air lift 26229 – 2 MANUAL PADDLE VALVE GAUGE PANEL & ALL FITTINGS, 40 AMP RELAY, 165/200 PSI PRESSURE SWITCH. NOTE: AIR BAGS ARE NOT INCLUDED. 1832 Lone Star Rd, Mansfield, TX 76063. Brand new Basic Kit Valve kit for 1/2 NPT Bags. This kit will work only with 1/2 NPT Bags. This kit can be used as a very basic air bag install on your vehicle without the need of solenoid valves. This is bare minimum Air Suspension kit. All you need is Air Bags with 1/2 NPT ports and bag brackets to finish your install. This kit can be used as a simulation to check the ride height before installing a full kit. This kit can be used for front and rear bags. Each bag will be inflated or deflated with one manual Paddle switch. Just add Tank and compressor to finish the basic install. Ideal for Load support as well as Low Rider Applications. Only for 1/2 NPT Single Port Air Bags! This Kit will come with following items. (1) Air Lift 26229 Dual Manual Paddle Switch Gauge Panel (With Pre-Fitted Fittings) – (1) 2 Gallon 6 Port Tank (4 3/8″ NPT Ports & 2 1/4″ NPT Ports) – (1) Viair 444C “BLACK” Compressor with 40 AMP Relay and 165/200 PSI Pressure Switch – (50) FT of 1/4″ OD Airline (SMC Brand) – (4) 1/2″ X 1/4″ Reducer Bushings for Bags – (5) 90 Degree Swivel Elbows for 1/4″ OD Airline – (2) 1/4 PTC union Tee’s (All Sides) PTC. (2) 3/8″ X 1/4″ Reducer. (1) 1/4″ NPT Drain Valve – (1) 3/8″ X 1/8″ Reducer Bushing – (1) 1/4″ Hex Plugs. Permanent Magnetic Motor. Duty Cycle: 100% AT 100 PSI (50% AT 200 PSI). Working Pressure: 200 PSI. Air Tank : 5 Gallon. 12V AMP Draw: 23 AMP. 444C Single Black Compressor. With Thermal Overload Protectors. 1 Filter Assembly with 2 Spare Filter Elements. 1 Set of Remote Filter Fittings. (4) Sets of Nuts, Bolts, Washers & Lock Washers. 1 Stainless Steel Braided Hose. 3 Airline Clips. 2 Gallon 6 Port Steel Tank – Comes with Mounting Hardware. 4 (3/8) Ports One on Each, 2 on Tank Face. 2 1/4 NPT Ports One Top & One Bottom. 17.75″ L X 6.0″ DIA X 8.25 H. 200 PSI Max. 200 PSI Dual Needle Gauge Panel with Back Light, with 1/4″ OD Airline Fittings on the back (Pre-installed) – 10-12 Sec Lift Speed and 6-8 Sec Drop Speed – Mechanical Paddle Valves with return to center position feature – Pre-installed Fitting Connection for easy plumbing – Air Escape through the side with minimum noise – Control Each Corner (2 Panels) or Front & Back with Union Tee’s in between Bag lines – Can be used for load support bags – 7″ Long at mounting lip, 5.5″ long at the front panel, 3″ Wide with approx 2.75 long Gauge Body. WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. NO PO Box only to physical addresses in 48 states in USA. Newmatics Inc is a family owned company, established in 2008. We are authorized dealer for all major Air Suspension companies in USA. We sell only major brand name authentic, 100% genuine parts. We are located at 1832 Lone Star Rd, Mansfield, TX 76063. We will answer your question or concern within 24 hours. International Customers (including Mexico & Canada) – Please Note. We cannot under-value merchandise or mark the items as a gift on custom forms & Invoices. This is against US and international laws. Please make sure, your address information is correct and up to date. All return items must be authorized and approved by us. Your feedback is very important for us. We will definitely resolve it. You can leave us a voice message, someone from our staff will get back to you same day or within 24 hours regarding the help and assistance needed. This item is in the category “eBay Motors\Parts & Accessories\Performance & Racing Parts\Auto Performance Parts\Chassis, Suspension & Brakes\Lower Kits & Parts”. The seller is “newmatics” and is located in this country: US. This item can be shipped worldwide.
  • Modified Item: No
  • Country/Region of Manufacture: United States
  • Custom Bundle: Yes
  • Adjustable: Yes
  • Manufacturer Part Number: BASIC-444BK12
  • Included Hardware: Tank Mounting Hardware-Nuts, Bolts & Washers, Mounting Hardware
  • Surface Finish: Black
  • Placement on Vehicle: Left, Right, Front, Rear, Upper, Lower
  • Brand: VIAIR
  • Fitment Type: Performance/Custom
  • Non-Domestic Product: No
  • Warranty: 1 Year
  • Bundle Description: Viair 444C Compressor, 2 Gallon Air Tank, Air Lift 26229 Manual Paddle Gauge Panel, DOT Airline, Pressure Switch, 40 AMP Relay & Fittings For Kit

Viair 444C Single Black Basic Front Back Manual Kit For 1/2 NPT Bags Air Ride

Viair 444C Single Black Basic Front Back Manual Kit For 3/8 NPT Bags Air Ride

Viair 444C Single Black Basic Front Back Manual Kit For 3/8 NPT Bags Air Ride

Viair 444C Single Black Basic Front Back Manual Kit For 3/8 NPT Bags Air Ride
Add to Favorite Sellers. AIR GAUGES & GAUGE PANELS. COMPLETE AIR RIDE KITS. COMPLETE BRACKET & BAGS KITS. FITTINGS & FLOW CONTROLS. ONBOARD & AIR SOURCE KITS. SWITCHES & SWITCH BOXES. Viair 444C black single air compressor basic manual front & back kit for 3/8 npt air bags, with 2 manual paddle valve gauge panel & all fittings. Note: air bags are not included. 1832 Lone Star Rd, Mansfield, TX 76063. Brand new Basic Kit Valve kit for 3/8 NPT Bags. This kit will work only with 3/8 NPT Bags. This kit can be used as a very basic air bag install on your vehicle without the need of solenoid valves. This is bare minimum Air Suspension kit. All you need is Air Bags with 3/8 NPT ports and bag brackets to finish your install. This kit can be used as a simulation to check the ride height before installing a full kit. This kit can be used for front and rear bags. Each bag will be inflated or deflated with one manual Paddle switch. Just add Tank and compressor to finish the basic install. Ideal for Load support as well as Low Rider Applications Only for 3/8 NPT Single Port Air Bags! This Kit will come with following items. (1) Air Lift 26229 Dual Manual Paddle Switch Gauge Panel (With Pre-Fitted Fittings) – (1) 2 Gallon 6 Port Tank – (4 3/8″ NPT Ports, 2 1/4″ NPT Ports) – (1) Viair 444C “BLACK” Compressor with 40 AMP Relay and 165/200 PSI Pressure Switch – (50) FT of 1/4″ OD Airline (SMC Brand) – (4) Reducer Bushings for Bags – (5) 90 Degree Swivel Elbows for 1/4″ OD Airline – (2) 1/4 PTC union Tee’s (All Sides) PTC. (2) 3/8″ X 1/4″ Reducer Bushings – (1) 3/8″ X 1/8″ Reducer Bushing. (1) 1/4″ NPT Drain Valve – (1) 1/4″ Hex Plugs. Permanent Magnetic Motor. Duty Cycle: 100% AT 100 PSI (50% AT 200 PSI). Working Pressure: 200 PSI. Air Tank : 5 Gallon. 12V AMP Draw: 23 AMP. 444C Single Black Compressor. With Thermal Overload Protectors. 1 Filter Assembly with 2 Spare Filter Elements. 1 Set of Remote Filter Fittings. (4) Sets of Nuts, Bolts, Washers & Lock Washers. 1 Stainless Steel Braided Hose. 3 Airline Clips. 2 Gallon 6 Port Steel Tank – Comes with Mounting Hardware. 4 (3/8) Ports One on Each, 2 on Tank Face. 2 1/4 NPT Ports One Top & One Bottom. 17.75″ L X 6.0″ DIA X 8.25 H. 200 PSI Max. 200 PSI Dual Needle Gauge Panel with Back Light, with 1/4″ OD Airline Fittings on the back (Pre-installed) – 10-12 Sec Lift Speed and 6-8 Sec Drop Speed – Mechanical Paddle Valves with return to center position feature – Pre-installed Fitting Connection for easy plumbing – Air Escape through the side with minimum noise – Control Each Corner (2 Panels) or Front & Back with Union Tee’s in between Bag lines – Can be used for load support bags – 7″ Long at mounting lip, 5.5″ long at the front panel, 3″ Wide with approx 2.75 long Gauge Body. WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. NO PO Box only to physical addresses in 48 states in USA. Newmatics Inc is a family owned company, established in 2008. We are authorized dealer for all major Air Suspension companies in USA. We sell only major brand name authentic, 100% genuine parts. We are located at 1832 Lone Star Rd, Mansfield, TX 76063. We will answer your question or concern within 24 hours. International Customers (including Mexico & Canada) – Please Note. We cannot under-value merchandise or mark the items as a gift on custom forms & Invoices. This is against US and international laws. Please make sure, your address information is correct and up to date. All return items must be authorized and approved by us. Your feedback is very important for us. We will definitely resolve it. You can leave us a voice message, someone from our staff will get back to you same day or within 24 hours regarding the help and assistance needed. This item is in the category “eBay Motors\Parts & Accessories\Performance & Racing Parts\Auto Performance Parts\Chassis, Suspension & Brakes\Lower Kits & Parts”. The seller is “newmatics” and is located in this country: US. This item can be shipped worldwide.
  • Modified Item: No
  • Country/Region of Manufacture: United States
  • Custom Bundle: Yes
  • Manufacturer Part Number: BASIC-444BK
  • Included Hardware: Tank Mounting Hardware-Nuts & Bolts, Mounting Hardware
  • Surface Finish: Black
  • Placement on Vehicle: Left, Right, Front, Rear, Upper, Lower
  • Brand: VIAIR
  • Non-Domestic Product: No
  • Warranty: 1 Year
  • Bundle Description: Viair 444C Compressor, 2 Gallon Air Tank, Air Lift 26229 Manual Paddle Gauge Panel, DOT Airline, Pressure Switch, 40 AMP Relay & Fittings For Kit

Viair 444C Single Black Basic Front Back Manual Kit For 3/8 NPT Bags Air Ride

Viair 444C Chrome Basic Manual Kit For 3/8 NPT Bags with Gauge Panel Fittings

Viair 444C Chrome Basic Manual Kit For 3/8 NPT Bags with Gauge Panel Fittings

Viair 444C Chrome Basic Manual Kit For 3/8 NPT Bags with Gauge Panel Fittings
Add to Favorite Sellers. AIR GAUGES & GAUGE PANELS. COMPLETE AIR RIDE KITS. COMPLETE BRACKET & BAGS KITS. FITTINGS & FLOW CONTROLS. ONBOARD & AIR SOURCE KITS. SWITCHES & SWITCH BOXES. Viair 444c “chrome” single air compressor basic manual front & back kit for 3/8 npt air bags with 2 manual paddle valve gauge panel & all fittings. Note:- air bags are not included. 1832 Lone Star Rd, Mansfield, TX 76063. Brand new Basic Kit Valve kit for 3/8 NPT Bags. This kit will work only with 3/8 NPT Bags. This kit can be used as a very basic air bag install on your vehicle without the need of solenoid valves. This is bare minimum Air Suspension kit. All you need is Air Bags with 3/8 NPT ports and bag brackets to finish your install. This kit can be used as a simulation to check the ride height before installing a full kit. This kit can be used for front and rear bags. Each bag will be inflated or deflated with one manual Paddle switch. Just add Tank and compressor to finish the basic install. Ideal for Load support as well as Low Rider Applications. Only for 3/8 NPT Single Port Air Bags! This Kit will come with following items. (1) Air Lift 26229 Dual Manual Paddle Switch Gauge Panel (With Pre-Fitted Fittings) – (1) 2 Gallon 6 Port Tank (one 3/8″ Port on each end, one 1/4″ port top & bottom, two 1/4″ port on face 18″ L X 6″ W” X 7.5″ H) – (1) Viair 444C “CHROME” Compressor with 40 AMP Relay and 165/200 PSI Pressure Switch – (50) FT of 1/4″ OD Airline (SMC Brand) – (4) Reducer Bushings for Bags – (5) 90 Degree Swivel Elbows for 1/4″ OD Airline – (2) 1/4″ PTC union Tee’s (All Sides) PTC. (2) 3/8″ X 1/4″ Reducer. (1) 1/4″ NPT Drain Valve – (2) 1/4″ Hex Plugs. Permanent Magnetic Motor. Duty Cycle: 100% AT 100 PSI (50% AT 200 PSI). Working Pressure: 200 PSI. Air Tank : 10 Gallon. 12V AMP Draw: 40 AMP Per Compressor. 2 Viair 444C “CHROME” Compressors & 8 3/8 NPT 12V DC Normally Closed Valves. All Compressor Mount Hardware. 4 Spare Filters. (2) Stainless Steel Braided Hoses (21 L) with inline check valve at end. All remote filter mount accessories (Not the remote hoses). 2 Gallon 6 Port Steel Tank. 2 (3/8″) Ports One on Each End, 4 1/4″ Ports (1 1/4″ Top & Bottom, 2 1/4″ Ports on Face). 18″ L X 7.5″ H (with mounting legs) X 6 D. Painted Inside out to prevent rust. Tested at 150 PSI (operating Pressure can be 200 PSI). 200 PSI Dual Needle Gauge Panel with Back Light, with 1/4″ OD Airline Fittings on the back (Pre-installed) – 10-12 Sec Lift Speed and 6-8 Sec Drop Speed – Mechanical Paddle Valves with return to center position feature – Pre-installed Fitting Connection for easy plumbing – Air Escape through the side with minimum noise – Control Each Corner (2 Panels) or Front & Back with Union Tee’s in between Bag lines – Can be used for load support bags – 7″ Long at mounting lip, 5.5″ long at the front panel, 3″ Wide with approx 2.75 long Gauge Body. WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. NO PO Box only to physical addresses in 48 states in USA. Newmatics Inc is a family owned company, established in 2008. We are authorized dealer for all major Air Suspension companies in USA. We sell only major brand name authentic, 100% genuine parts. We are located at 1832 Lone Star Rd, Mansfield, TX 76063. We will answer your question or concern within 24 hours. International Customers (including Mexico & Canada) – Please Note. We cannot under-value merchandise or mark the items as a gift on custom forms & Invoices. This is against US and international laws. Please make sure, your address information is correct and up to date. All return items must be authorized and approved by us. Your feedback is very important for us. We will definitely resolve it. You can leave us a voice message, someone from our staff will get back to you same day or within 24 hours regarding the help and assistance needed. This item is in the category “eBay Motors\Parts & Accessories\Performance & Racing Parts\Auto Performance Parts\Chassis, Suspension & Brakes\Lower Kits & Parts”. The seller is “newmatics” and is located in this country: US. This item can be shipped worldwide.
  • Country/Region of Manufacture: United States
  • Manufacturer Part Number: BASIC-444CH-38
  • Surface Finish: Black
  • Placement on Vehicle: Left, Right, Rear
  • Brand: Air Lift, SMC,Viair
  • Warranty: Yes

Viair 444C Chrome Basic Manual Kit For 3/8 NPT Bags with Gauge Panel Fittings

1992-1997 Lincoln Town car Complete Manual Air Suspension kit Single 444C Chrome

1992-1997 Lincoln Town car Complete Manual Air Suspension kit Single 444C Chrome

1992-1997 Lincoln Town car Complete Manual Air Suspension kit Single 444C Chrome
Add to Favorite Sellers. AIR GAUGES & GAUGE PANELS. COMPLETE AIR RIDE KITS. COMPLETE BRACKET & BAGS KITS. FITTINGS & FLOW CONTROLS. ONBOARD & AIR SOURCE KITS. SWITCHES & SWITCH BOXES. 1832 Lone Star Rd, Mansfield, TX 76063. This kit includes a Viair 444C Single Chrome 200 PSI Max Air Compressor with 165/200 PSI Pressure Switch & heavy duty 40 AMP relay. The front bag brackets are complete bolt in type with single bellow bags on front, Rear lower axle bag brackets require welding over the axle with bolt in cups on top, rear double bellow bags. Comes with 2.5 Gallon 6 1/4 NPT tank (Black or Silver Color) with all required fittings, Airline, Manual Paddle switch gauge panel & Front Universal Shock relocation kit. Fittings shown in the picture are for illustration purposes only. The actual number of fittings included will be as per tank and will be a complete fittings set for this kit. Do not use shocks with more stroke than the bags stroke, otherwise bags will split at bottom or top due to over extension. No Compressor wiring or relay & gauge light bulb wiring included with this kit. 5″ Tall Cups on front top with all thread, with 2″ cups on lower A Arm, Drill through the bottom A arm to bolt single bellow Airhouse2 Bags on front. Relocate shocks outside A arm (welding may be required) 3 Tall cups on rear top with all thread, weld axle brackets on rear bottom axle with center to top cups, bolt double convoluted bags on both upper cup & lower over the axle brackets. Front Bags are single convoluted with 5.875″ Diameter, these will collapse 2″ and max 8.5 high (Max height will be based on pressure in the bags). Usable stroke of 6″ to 6.5″. Rear Bags are double convoluted with 5.875″ diameter, these will collapse 3.25″ and Max 11 high (max height will be based on how much pressure in the bags). Usable stroke of 7″ to 7.5″. Make sure both front and rear bag bracket are in center to each other before bolting the bags down on them. No wiring as well as hardware is supplied with this kit. Use 3/8-16 UNC bolts with the bags. Bolts must be of right size otherwise longer bolts may damage the bags. Parts Included with This kit. Following items are included with this kit – A pair of front & rear bags (1/2″ NPT OR 3/8″ NPT). Made in USA – Set of front & rear Bag Brackets – One front shock relocation kit – Viair 444C Single Chrome Compressor with 165/200 PSI Pressure Switch & heavy duty 40 AMP relay. Dual Manual Paddle switch Gauge Panel w 200 PSI Gauge (pre-fitted with fittings) – 2.5 Gallon 6 1/4″ NPT Port Tank (Black or Silver Color) – 5 1/4″ Push to Connect X 1/4 NPT Swivel Elbows. 4 Heavy Duty Brass reducer bushings for bags (3/8″ X 1/4″ OR 1/2″ X 1/4″ depending upon the bag ports available). 2 1/4 OD Tubing Union Tee’s to split lines for bags. 1 1/4″ X 1/8″ Reducer Bushing for Pressure switch. 1 1/4 NPT Drain cock. 1 250 PSI Safety Valve – 1 1/4 NPT Plug to plug extra port on the tank. WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. Newmatics Inc is a family owned company, established in 2008. We are authorized dealer for all major Air Suspension companies in USA. We sell only major brand name authentic, 100% genuine parts. We are located at 1832 Lone Star Rd, Mansfield, TX 76063. We will answer your question or concern within 24 hours. International Customers (including Mexico & Canada) – Please Note. We cannot under-value merchandise or mark the items as a gift on custom forms & Invoices. This is against US and international laws. Please make sure, your address information is correct and up to date. All return items must be authorized and approved by us. Your feedback is very important for us. We will definitely resolve it. You can leave us a voice message, someone from our staff will get back to you same day or within 24 hours regarding the help and assistance needed. This item is in the category “eBay Motors\Parts & Accessories\Performance & Racing Parts\Auto Performance Parts\Chassis, Suspension & Brakes\Lower Kits & Parts”. The seller is “newmatics” and is located in this country: US. This item can be shipped worldwide.
  • Country/Region of Manufacture: United States
  • Adjustable: Yes
  • Manufacturer Part Number: LIN80-02-TOWN-MAN-KIT
  • Included Hardware: Bag Brackets, Air Bag, Mounting Hardware
  • Placement on Vehicle: Left, Right, Front, Rear, Upper, Lower
  • Brand: Newmatics
  • Fitment Type: Performance/Custom
  • Warranty: 6 Month

1992-1997 Lincoln Town car Complete Manual Air Suspension kit Single 444C Chrome