Front Shocks Relocator Kit Universal Weld On Shock Mount Bracket & Hardware

Front Shocks Relocator Kit Universal Weld On Shock Mount Bracket & Hardware
Front Shocks Relocator Kit Universal Weld On Shock Mount Bracket & Hardware
Front Shocks Relocator Kit Universal Weld On Shock Mount Bracket & Hardware
Front Shocks Relocator Kit Universal Weld On Shock Mount Bracket & Hardware
Front Shocks Relocator Kit Universal Weld On Shock Mount Bracket & Hardware
Front Shocks Relocator Kit Universal Weld On Shock Mount Bracket & Hardware
Front Shocks Relocator Kit Universal Weld On Shock Mount Bracket & Hardware
Front Shocks Relocator Kit Universal Weld On Shock Mount Bracket & Hardware
Front Shocks Relocator Kit Universal Weld On Shock Mount Bracket & Hardware
Front Shocks Relocator Kit Universal Weld On Shock Mount Bracket & Hardware
Front Shocks Relocator Kit Universal Weld On Shock Mount Bracket & Hardware
Front Shocks Relocator Kit Universal Weld On Shock Mount Bracket & Hardware

Front Shocks Relocator Kit Universal Weld On Shock Mount Bracket & Hardware
Universal Front Shock Relocation Kit With Shocks and Hardware. Allows for re-location of front shocks to the outside of the control arm when replacing from coil spring or torsion with air bags. The right to make changes in design or add to or improve on product without incurring any obligations to install the same on products previously manufactured is expressly reserved. All parts are aftermarket replacement parts. Unless specifically noted, no implication is made that these parts are the original car manufacturers’, are from the original suppliers, or are approved by them. Always utilize safety restrain systems while operating vehicle. Billet Adapters are intended to be used ONLY on a show vehicle, stylized for a special look and NOT intended to be used on long driving, freeway driving and every day driving. Under no circumstances will Phx Wheel Inc. Be liable to any party for any direct, indirect, special, incidental, consequential, or other damages based on any improper use.. It is up to the user and/or installer to determine fitness for any other application. Many of our products require fabrication skills to install and should only be installed by a qualified fabricator or mechanic. Product must be unused and in original boxes and packaging material. Or without a RA# will be refused. No claims will be accepted on parts that have been modified in any way. It is also the responsibility of the person installing any component or kit to determine the suitability of the components or kit for that particular application. Products are intended for off road and show use only. Always check with your local authorities for highway laws in your area because highway laws and the enforcement of those laws vary widely. The item “Front Shocks Relocator Kit Universal Weld On Shock Mount Bracket & Hardware” is in sale since Thursday, November 14, 2019. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Suspension & Steering\Shocks & Struts”. The seller is “wheelsnparts” and is located in Mesa, Arizona. This item can be shipped worldwide.
  • Interchange Part Number: upper tab relocation,air,ride,custom,suspension
  • Adjustable: Yes
  • Manufacturer Part Number: SHO-REL-FT
  • Part Type: Shock Mount Bracket
  • Included Hardware: Shock
  • Bundle Listing: Yes
  • Fit for: Universal
  • Type: Universal
  • Kit Parts Included: Shock
  • Connection Type: Weld-on
  • Placement on Vehicle: Left
  • Other Part Number: relocate shocks after air bag install
  • Brand: Weld Mount
  • Fitment Type: Performance/Custom
  • Warranty: 1 Year

Front Shocks Relocator Kit Universal Weld On Shock Mount Bracket & Hardware

Front Pair Suspension Air Springs Bags for 2006-2013 Range Rover Sport

Front Pair Suspension Air Springs Bags for 2006-2013 Range Rover Sport

Front Pair Suspension Air Springs Bags for 2006-2013 Range Rover Sport
Brand New Front Air Ride Suspension Air Spring Bags. 2006 – 2013 Land Rover Range Rover Sport. EXCLUDES L322, MK-III, AND LM MODELS. Fitment Type: Direct Replacement / Gas Charged. ShockMasters is not only the #1 eCommerce store for vehicle suspension for many makes and models, but offers the best prices you can find online! Other stores offer tons of different products; we are focused only on suspension parts, making it easier to find parts you need at a price you can afford. If you have any questions, or just want a reliable part at an unbeatable price, ShockMasters is the store for you. The item “Front Pair Suspension Air Springs Bags for 2006-2013 Range Rover Sport” is in sale since Friday, June 8, 2018. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Suspension & Steering\Shocks & Struts”. The seller is “shock*masters” and is located in Delray Beach, Florida. This item can be shipped to United States, Canada.
  • Adjustable: Yes
  • Manufacturer Part Number: 34243
  • Placement on Vehicle: Left
  • Other Part Number: REB500060
  • Brand: Shock Masters
  • Warranty: 1 Year
  • Interchange Part Number: 2006 2007 2008 2009 2010 2011 2012 2013 Land Rover Range Rover
  • Interchange: REB500190,LR016403,LR018398,RNB501580,RNB501580,45-218644
  • Part Type: Air Suspension Spring Set
  • Fitment Type: Direct Replacement
  • Kit or Single Part: Kit

Front Pair Suspension Air Springs Bags for 2006-2013 Range Rover Sport

Front Right OE REMAN Suspension Air Spring Strut Mercedes CLS350 500 550 W219

Front Right OE REMAN Suspension Air Spring Strut Mercedes CLS350 500 550 W219
Front Right OE REMAN Suspension Air Spring Strut Mercedes CLS350 500 550 W219
Front Right OE REMAN Suspension Air Spring Strut Mercedes CLS350 500 550 W219
Front Right OE REMAN Suspension Air Spring Strut Mercedes CLS350 500 550 W219
Front Right OE REMAN Suspension Air Spring Strut Mercedes CLS350 500 550 W219
Front Right OE REMAN Suspension Air Spring Strut Mercedes CLS350 500 550 W219
Front Right OE REMAN Suspension Air Spring Strut Mercedes CLS350 500 550 W219
Front Right OE REMAN Suspension Air Spring Strut Mercedes CLS350 500 550 W219
Front Right OE REMAN Suspension Air Spring Strut Mercedes CLS350 500 550 W219
Front Right OE REMAN Suspension Air Spring Strut Mercedes CLS350 500 550 W219

Front Right OE REMAN Suspension Air Spring Strut Mercedes CLS350 500 550 W219
Front Right OE REMAN Suspension Air Spring Strut Mercedes CLS350 500 550 W219. What is an air spring bag strut? Sometimes it is called an Air Spring, Air Shock, Air Bag or Bellows. A conventional strut uses a steel coil spring but an air strut employs an air spring bag or bellow. This makes the ride more comfortable and gives the driver more control of ride height. The most common reason for an air strut failure is due to dry rotting of the air spring bag. This is something that happens over time, the rubber starts to deteriorate and causes leaks, when this happens the air bag can no longer hold air pressure. A leaking air bag can cause the strut it fits over to fail as well. The second factor of an air strut failure is the strut itself. The strut is pressurized with fluid, and if the strut begins to fail it will no longer have the same pressure to hold the vehicle. If this system begins to fail one visible sign will be that your vehicle will be lower than factory height. If Air Struts are not replaced on time it will cause Air Suspension Compressor Failure. This Listing is For 1 Mercedes. Front Right OEM Rebuild Suspension Air Spring Bag Strut. CLS-Class (W219) Models Include: CLS350, CLS500 & CLS550. Note: This Air Spring Bag Strut will work on CLS-Class Sedans & Wagons With AIRMATIC Suspension Only, It Will NOT fit on Vehicles Equipped with 4MATIC. This part is NOT for CLS55 AMG & CLS63 AMG Models. WE CANNOT PROCESS YOUR ORDER UNTIL THE CORE DEPOSIT IS PAID. Please make sure that the problem with your vehicle is with your Original Part. Do not trust your safety to companies outside the U. GET CASH BACK – LET US RECYCLE YOUR CORE. Placing an Order Signifies that You Accept And Agree to Our Terms and Conditions. Unless a resale certificate is sent.. The resale certificate is subject to RMT’s approval. Boxes: UPS is our preferred shipper for packages weighing over 2 pounds and they do not deliver to P. Boxes, Physical addresses only. Boxes and Physical addresses. This is to ensure that parts pass quality tests. International buyers please note. Except as set forth in 3. In the event that a product proves to be defective, RMTs sole obligation shall be, at its option, to repair or replace the product. Upon inspection if the supposed defective part does not meet warrantable conditions and / or is in the 3. EXCLUSIONS the Customer will have the option of purchasing a new part and RMT. RMT shall send a part out from stock. Once the claimed defective RMT part arrives back at RMTs facility a full inspection will be conducted. No employee, agent, or representative of RMT has the authority to waive, alter, vary, or add to the terms hereof without the prior written approval of an officer of RMT. The following products have time limited warranties: 1. ALL CLAIMS MUST BE MADE BY THE CUSTOMER AND MAY NOT BE MADE BY ANY THIRD PARTY. ANY SUCH ATTEMPTED TRANSFER OR ASSIGNMENT SHALL BE NULL AND VOID. THE CUSTOMER AGREES TO TAKE FULL RESPONSIBILITY FOR ANY AND ALL LABOR COSTS. THE PARTS, ESPECIALLY FOR COMPRESSORS! AFTER INSPECTION OF A PRODUCT, RMT DETERMINES, IN ITS SOLE DISCRETION, THAT IT IS NOT DEFECTIVE IN MATERIAL OR WORKMANSHIP. THIS INCLUDES BUT NOT LIMITED TO; 1. ANY FLUID THAT DOES NOT BELONG TO THE SYSTEM. ANOTHER LEAK IN THE SYSTEM (LEAKING AIR BLADDERS, OR AIR LINES IN THE SYSTEM ARE LEAKING) IS CAUSING THE RMT PRODUCT TO FAIL CAUSING UNITS SUCH AS AN AIR SUSPENSION COMPRESSOR TO OVER WORK AND BURN OUT THE MOTOR. IMPROPER INSTALLATION OF THE PRODUCT. IMPROPER USE OF THE PART. NOT PROPERLY CONNECTING THE CONNECTORS, SUCH AS REVERSE POLARITY, WRONG PLUGS, AND AFTERMARKET PLUGS. FUSES BEING BLOWN / BURNT OUT DUE TO NOT REPLACING THE RELAY. ANY PART IN A PRODUCT OR ANY INGREDIENT CONTAINED IN A PRODUCT REQUIRES REPLACEMENT OR REPAIR THROUGH ROUTINE USAGE OR NORMAL WEAR AND TEAR 5. A PRODUCT IS NOT MAINTAINED OR USED IN ACCORDANCE WITH RMTS APPLICABLE OPERATING AND/OR MAINTENANCE MANUALS, WHETHER BY THE CUSTOMER OR ANY THIRD PARTY; 6. A PRODUCT HAS BEEN SUBJECT TO MISUSE, MISAPPLICATION, NEGLIGENCE, NEGLECT (INCLUDING, BUT NOT LIMITED TO, IMPROPER MAINTENANCE OR STORAGE), ACCIDENT, CATASTROPHE, IMPROPER INSTALLATION, MODIFICATION, ADJUSTMENT, REPAIR OR LUBRICATION, WHETHER BY THE CUSTOMER OR ANY THIRD PARTY, WITHOUT THE PRIOR WRITTEN CONSENT OF RMT. MISUSE SHALL INCLUDE, BUT NOT BE LIMITED TO, DETERIORATION IN A PRODUCT DUE TO CHEMICAL ACTION AND WEAR CAUSED BY THE PRESENCE OF ABRASIVE MATERIALS 7. THE SYSTEM INTO WHICH THE PRODUCT BECOMES INCORPORATED IS NOT COMPATIBLE WITH THE PRODUCT, OR IT IS NOT FREE FROM CRITICAL SPEED OR TORSIONAL OR OTHER TYPE OF VIBRATION WITHIN THE SPECIFIED OPERATING RANGE, NO MATTER HOW INDUCED; OR 8. MORE THAN TWO (2) MINUTES OF RUNTIME IS A SIGN OF OVER WORKING THE COMPRESSOR, RISKING IT TO BURN OUT. The part must be unused, in it’s original package (No wrapping or seals can be broken), and must be in re-sellable condition. This Listing is one of a few that has a Mandatory Core Deposit. We are a GREEN company and we do our best to Recycle. We will rebuild this part and help others like you. Thank you for Helping Us Recycle. Core Prices are subject to change due to supply and demand, condition and quantity of cores daily. 8AM to 6PM EST Monday-Friday. Great Service & Parts Quality Guaranteed! The item “Front Right OE REMAN Suspension Air Spring Strut Mercedes CLS350 500 550 W219″ is in sale since Wednesday, May 7, 2014. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Suspension & Steering\Shocks & Struts”. The seller is “rebuildmastertech” and is located in Pompano Beach, Florida. This item can be shipped worldwide.
  • Modified Item: No
  • Country/Region of Manufacture: United States
  • Custom Bundle: No
  • Interchange Part Number: W219
  • Adjustable: Yes
  • Greasable or Sealed: Sealed
  • Compression Range: 20 – 200 PSI
  • Manufacturer Part Number: M211-R310-RWFR
  • Part Type: Air Suspension Strut
  • Gas Charged Shock: Yes
  • Included Hardware: Airmatic
  • Core Deposit: $75
  • Kit or Single Part: Kit
  • Kit Parts Included: Air Shock
  • MPN: M211-R310-RWFR
  • OE Spec or Performance/Custom: OE Spec
  • Product Type: Air Strut
  • Surface Finish: New
  • Placement on Vehicle: Right
  • Other Part Number: Air ,Strut ,Shock, Spring , Bag , W219, CLS , 219
  • Brand: RMT
  • Fitment Type: Direct Replacement
  • Non-Domestic Product: No
  • Warranty: Lifetime

Front Right OE REMAN Suspension Air Spring Strut Mercedes CLS350 500 550 W219

Front Air Bag Brackets Universal Cup Mount Set with Hardware FREE SHIPPING

Front Air Bag Brackets Universal Cup Mount Set with Hardware FREE SHIPPING

Front Air Bag Brackets Universal Cup Mount Set with Hardware FREE SHIPPING
Use these cup brackets in place of your stock coil springs to mount a set of air bags. With a 5.5 diameter, these cups fit the spring pockets of a bunch of GM cars and trucks, along with some Ford and Dodge trucks too. Upper cups are 3″ tall, and lowers are 2″. The upper cups include a 6 long threaded stud with mounting hardware to make installation easy. Bolt pattern matches all popular air bag brands and sizes – Air Lift 2500 and 2600, Slam Specialties 5″, 6″, 7″, and 8″, ContiTech 2500 and 2600, and Firestone 255 & 224 bags. LOWER PLATES HAVE OUTER HOLES SPACED AT 2.75 FOR LARGER BAGS WITHOUT A CENTER HOLE, AND A CENTER HOLE FOR SMALLER BAGS. IF YOUR SMALLER AIR BAGS HAVE THREE MOUNTING HOLES YOU WILL ONLY USE THE CENTER HOLE. The item “Front Air Bag Brackets Universal Cup Mount Set with Hardware FREE SHIPPING” is in sale since Thursday, December 27, 2018. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Suspension & Steering\Lower Kits & Parts”. The seller is “twisted_images” and is located in El Reno, Oklahoma. This item can be shipped worldwide.
  • Country/Region of Manufacture: United States
  • Manufacturer Part Number: 335F
  • Included Hardware: Mounting Hardware
  • Surface Finish: Raw
  • Country of Manufacture: United States
  • Kit or Single Part: Kit
  • Placement on Vehicle: Front
  • Brand: Twisted Images

Front Air Bag Brackets Universal Cup Mount Set with Hardware FREE SHIPPING

Front Lowering Air Suspension Bags Fits Chrysler 300 05-10 Dodge Charger Magnum

Front Lowering Air Suspension Bags Fits Chrysler 300 05-10 Dodge Charger Magnum
Front Lowering Air Suspension Bags Fits Chrysler 300 05-10 Dodge Charger Magnum
Front Lowering Air Suspension Bags Fits Chrysler 300 05-10 Dodge Charger Magnum
Front Lowering Air Suspension Bags Fits Chrysler 300 05-10 Dodge Charger Magnum
Front Lowering Air Suspension Bags Fits Chrysler 300 05-10 Dodge Charger Magnum
Front Lowering Air Suspension Bags Fits Chrysler 300 05-10 Dodge Charger Magnum
Front Lowering Air Suspension Bags Fits Chrysler 300 05-10 Dodge Charger Magnum
Front Lowering Air Suspension Bags Fits Chrysler 300 05-10 Dodge Charger Magnum
Front Lowering Air Suspension Bags Fits Chrysler 300 05-10 Dodge Charger Magnum
Front Lowering Air Suspension Bags Fits Chrysler 300 05-10 Dodge Charger Magnum
Front Lowering Air Suspension Bags Fits Chrysler 300 05-10 Dodge Charger Magnum
Front Lowering Air Suspension Bags Fits Chrysler 300 05-10 Dodge Charger Magnum

Front Lowering Air Suspension Bags Fits Chrysler 300 05-10 Dodge Charger Magnum
Air Ride Suspension Front Lowering Kit. Fits 2005-10 Chrysler 300 Dodge Charger Magnum Challenger. Upper & Lower Brackets Two Front Bags Are Single Convoluted “Aero Sport” Air Bags. 4.0″ Compressed 9.25″ Extended 5.875 Diameter. Designed for to slip over your Factory/Performance Struts. Pressure tube must be less then 2.14 in Diameter and clearance of 6 on the O. The right to make changes in design or add to or improve on product without incurring any obligations to install the same on products previously manufactured is expressly reserved. All parts are aftermarket replacement parts. Unless specifically noted, no implication is made that these parts are the original car manufacturers’, are from the original suppliers, or are approved by them. Always utilize safety restrain systems while operating vehicle. Billet Adapters are intended to be used ONLY on a show vehicle, stylized for a special look and NOT intended to be used on long driving, freeway driving and every day driving. Under no circumstances will Phx Wheel Inc. Be liable to any party for any direct, indirect, special, incidental, consequential, or other damages based on any improper use.. It is up to the user and/or installer to determine fitness for any other application. Many of our products require fabrication skills to install and should only be installed by a qualified fabricator or mechanic. Product must be unused and in original boxes and packaging material. Or without a RA# will be refused. No claims will be accepted on parts that have been modified in any way. It is also the responsibility of the person installing any component or kit to determine the suitability of the components or kit for that particular application. Products are intended for off road and show use only. Always check with your local authorities for highway laws in your area because highway laws and the enforcement of those laws vary widely. The item “Front Lowering Air Suspension Bags Fits Chrysler 300 05-10 Dodge Charger Magnum” is in sale since Wednesday, February 8, 2017. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Suspension & Steering\Shocks & Struts”. The seller is “wheelsnparts” and is located in Mesa, Arizona. This item can be shipped worldwide.
  • Type: Kit
  • Product Type: Strut Mount
  • Bundle Listing: Yes
  • Interchange Part Number: Keep Factory or Performance Struts Drop Lower
  • Adjustable: Yes
  • Manufacturer Part Number: K-UNA-2BPB
  • Placement on Vehicle: Left
  • Brand: AirMaxxx
  • Fitment Type: Performance/Custom

Front Lowering Air Suspension Bags Fits Chrysler 300 05-10 Dodge Charger Magnum

1982 2005 S10 Front Rear Weld on Kit Notch Triangulate 4 Link airmaxxx Air Bag

1982 2005 S10 Front Rear Weld on Kit Notch Triangulate 4 Link airmaxxx Air Bag
1982 2005 S10 Front Rear Weld on Kit Notch Triangulate 4 Link airmaxxx Air Bag
1982 2005 S10 Front Rear Weld on Kit Notch Triangulate 4 Link airmaxxx Air Bag
1982 2005 S10 Front Rear Weld on Kit Notch Triangulate 4 Link airmaxxx Air Bag
1982 2005 S10 Front Rear Weld on Kit Notch Triangulate 4 Link airmaxxx Air Bag
1982 2005 S10 Front Rear Weld on Kit Notch Triangulate 4 Link airmaxxx Air Bag
1982 2005 S10 Front Rear Weld on Kit Notch Triangulate 4 Link airmaxxx Air Bag
1982 2005 S10 Front Rear Weld on Kit Notch Triangulate 4 Link airmaxxx Air Bag
1982 2005 S10 Front Rear Weld on Kit Notch Triangulate 4 Link airmaxxx Air Bag
1982 2005 S10 Front Rear Weld on Kit Notch Triangulate 4 Link airmaxxx Air Bag
1982 2005 S10 Front Rear Weld on Kit Notch Triangulate 4 Link airmaxxx Air Bag
1982 2005 S10 Front Rear Weld on Kit Notch Triangulate 4 Link airmaxxx Air Bag

1982 2005 S10 Front Rear Weld on Kit Notch Triangulate 4 Link airmaxxx Air Bag
2500 Air Bags and Manual Inflation. To see Air Management Options. Four 24.00″ x 1.25″ Bars w/ LH and RH Rod Ends. 8 PCS Weld in Step Notch (see pics for specs). Upper Weld on Frame Mounts. Over the Axle Bag Mounts. Front Bolt in Bag Mounts. Four 2500 Airmaxxx Bags w/ Hardware. Four 3/8 Nickle/Brass Air Bag Fittings. Two 3/8 Nickle/Brass Tee Fittings. Two 3/8 Schrader Valve (inflation). 20ft SMC DOT Air Hose. The right to make changes in design or add to or improve on product without incurring any obligations to install the same on products previously manufactured is expressly reserved. All parts are aftermarket replacement parts. Unless specifically noted, no implication is made that these parts are the original car manufacturers’, are from the original suppliers, or are approved by them. Always utilize safety restrain systems while operating vehicle. Billet Adapters are intended to be used ONLY on a show vehicle, stylized for a special look and NOT intended to be used on long driving, freeway driving and every day driving. Under no circumstances will Phx Wheel Inc. Be liable to any party for any direct, indirect, special, incidental, consequential, or other damages based on any improper use.. It is up to the user and/or installer to determine fitness for any other application. Many of our products require fabrication skills to install and should only be installed by a qualified fabricator or mechanic. Product must be unused and in original boxes and packaging material. Or without a RA# will be refused. No claims will be accepted on parts that have been modified in any way. It is also the responsibility of the person installing any component or kit to determine the suitability of the components or kit for that particular application. Products are intended for off road and show use only. Always check with your local authorities for highway laws in your area because highway laws and the enforcement of those laws vary widely. The item “1982 2005 S10 Front Rear Weld on Kit Notch Triangulate 4 Link airmaxxx Air Bag” is in sale since Tuesday, August 11, 2020. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Suspension & Steering\Lower Kits & Parts”. The seller is “airslamit” and is located in Mesa, Arizona. This item can be shipped worldwide.
  • Custom Bundle: No
  • Interchange Part Number: 4link,4-link,air suspension,air ride,ride,tech
  • Adjustable: Yes
  • Manufacturer Part Number: K-S10-BB-TRI-2600
  • Included Hardware: Air Fittings
  • Placement on Vehicle: Left
  • Other Part Number: weld full adjustable Rear supension
  • Brand: Airslamit Airmaxxx
  • Fitment Type: Performance/Custom
  • Warranty: Lifetime

1982 2005 S10 Front Rear Weld on Kit Notch Triangulate 4 Link airmaxxx Air Bag

Front Air Ride Suspension For 63-72 Chevy C10 Brackets & 2600 Bags AirMaxxx 3/8

Front Air Ride Suspension For 63-72 Chevy C10 Brackets & 2600 Bags AirMaxxx 3/8
Front Air Ride Suspension For 63-72 Chevy C10 Brackets & 2600 Bags AirMaxxx 3/8
Front Air Ride Suspension For 63-72 Chevy C10 Brackets & 2600 Bags AirMaxxx 3/8
Front Air Ride Suspension For 63-72 Chevy C10 Brackets & 2600 Bags AirMaxxx 3/8
Front Air Ride Suspension For 63-72 Chevy C10 Brackets & 2600 Bags AirMaxxx 3/8
Front Air Ride Suspension For 63-72 Chevy C10 Brackets & 2600 Bags AirMaxxx 3/8
Front Air Ride Suspension For 63-72 Chevy C10 Brackets & 2600 Bags AirMaxxx 3/8
Front Air Ride Suspension For 63-72 Chevy C10 Brackets & 2600 Bags AirMaxxx 3/8
Front Air Ride Suspension For 63-72 Chevy C10 Brackets & 2600 Bags AirMaxxx 3/8
Front Air Ride Suspension For 63-72 Chevy C10 Brackets & 2600 Bags AirMaxxx 3/8
Front Air Ride Suspension For 63-72 Chevy C10 Brackets & 2600 Bags AirMaxxx 3/8
Front Air Ride Suspension For 63-72 Chevy C10 Brackets & 2600 Bags AirMaxxx 3/8

Front Air Ride Suspension For 63-72 Chevy C10 Brackets & 2600 Bags AirMaxxx 3/8
Air Ride Suspension Front Mount Brackets & 2600 Bags 1963-72 Chevy C10 AirMaxxx 3/8. Front Air Bag and Bracket Kit Includes: Two – AirMaxxx 1/2″ NPT 2600 Air Bags Two – Brass Push Connect Fittings for 3/8″ Air Hose Two – Bolt in Upper Air Bag Mount w/ Hardware Two – 2 Lower Mounting Cups. Bag Brackets Feature: The Upper Bracket Is Laser Cut From 3/16 Steel. Direct Bolt on to Upper Spring Pocket Outer Flange with 4 Bolts. The right to make changes in design or add to or improve on product without incurring any obligations to install the same on products previously manufactured is expressly reserved. All parts are aftermarket replacement parts. Unless specifically noted, no implication is made that these parts are the original car manufacturers’, are from the original suppliers, or are approved by them. Always utilize safety restrain systems while operating vehicle. Billet Adapters are intended to be used ONLY on a show vehicle, stylized for a special look and NOT intended to be used on long driving, freeway driving and every day driving. Under no circumstances will Phx Wheel Inc. Be liable to any party for any direct, indirect, special, incidental, consequential, or other damages based on any improper use.. It is up to the user and/or installer to determine fitness for any other application. Many of our products require fabrication skills to install and should only be installed by a qualified fabricator or mechanic. Product must be unused and in original boxes and packaging material. Or without a RA# will be refused. No claims will be accepted on parts that have been modified in any way. It is also the responsibility of the person installing any component or kit to determine the suitability of the components or kit for that particular application. Products are intended for off road and show use only. Always check with your local authorities for highway laws in your area because highway laws and the enforcement of those laws vary widely. The item “Front Air Ride Suspension For 63-72 Chevy C10 Brackets & 2600 Bags AirMaxxx 3/8″ is in sale since Tuesday, March 1, 2016. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Suspension & Steering\Lower Kits & Parts”. The seller is “wheelsnparts” and is located in Mesa, Arizona. This item can be shipped worldwide.
  • Country/Region of Manufacture: United States
  • Interchange Part Number: c-10 air bag bracket kit mounts
  • Adjustable: Yes
  • Bundle Listing: Yes
  • Surface Finish: Raw Steel
  • Type: Mounting Bracket
  • Manufacturer Part Number: K-BRKT-26-C10-FRONT-38
  • Part Type: Mounting Bracket
  • Placement on Vehicle: Left
  • Other Part Number: Truck Pick up 1/2ton 1/2 ton
  • Brand: AirMaxxx
  • Fitment Type: Performance/Custom
  • Warranty: Lifetime

Front Air Ride Suspension For 63-72 Chevy C10 Brackets & 2600 Bags AirMaxxx 3/8