VIAIR 20007 380C COMPRESSOR 200 PSI 2 Gal. 12v. On Board for Air Tools Horns Bags

VIAIR 20007 380C COMPRESSOR 200 PSI 2 Gal. 12v. On Board for Air Tools Horns Bags
VIAIR 20007 380C COMPRESSOR 200 PSI 2 Gal. 12v. On Board for Air Tools Horns Bags
VIAIR 20007 380C COMPRESSOR 200 PSI 2 Gal. 12v. On Board for Air Tools Horns Bags
VIAIR 20007 380C COMPRESSOR 200 PSI 2 Gal. 12v. On Board for Air Tools Horns Bags
VIAIR 20007 380C COMPRESSOR 200 PSI 2 Gal. 12v. On Board for Air Tools Horns Bags

VIAIR 20007 380C COMPRESSOR 200 PSI 2 Gal. 12v. On Board for Air Tools Horns Bags
VIAIR 20007 Air Source Kit. Fast-Fill 200 PSI Air Source Kits come with a powerful, low amp-draw 380C VIAIR compressor mounted on a 200 PSI-rated 2.0 gallon air tank with 5 ports. All 200 PSI Air Source kits come with a pre-wired 165/200 PSI pressure switch. Both kits not only come with the industrys leading 200 PSI compressors but also come with a drain cock, safety valve, 1/2-inch port compression fitting for 3/8-inch air line pre-installed!!! To use, simply connect the pressure switch to fused power, make a solid ground and connect an air line to the compression fitting. The use of a 40-amp relay and an appropriately-rated fuse is strongly recommended to preserve the life of the pressure switch. Use For Air Horns. Use For Load Level Air Springs. Use For Suspension Air Bags. Use For Air Lockers. Use For Tire Inflation. Use For Air Tools. Features: – Gearless, direct-drive electric motors – Oil-less design requires no maintenance (beside filter inspection/replacement) – High performance, heavy duty PTFE piston ring – Anodized piston cylinder for increased wear protection – Precision, high speed, durable bearings for increased piston & motor life – Sealed motor housing for moisture resistance – Environmental seals where electrical connections enter motor housing – Efficient, oversized heat sink head assembly for increased heat dissipation, duty cycle & performance – High performance check valve eliminates restart pressure on head and piston – Replacement air filter elements (filtration to 10 microns) – Heavy duty mounting feet – Reinforced vibration isolators for safe & quiet operation – Mounting hardware (bolts, washers, locking washers, nuts) – Thermal overload protection that protect compressor in event of overheating/over duty cycle operation – Maximum operating temperature is 158 F – Minimum operating temperature is -40 F. Working Pressure: 200 PSI Max. Amp Draw: 21 Amps Dimensions: 19″L x 5.9″W x 14.2H. Kit Includes: Pressure Switch(165psi ON – 200psi OFF) Compression Fitting for 3/8” ID Tubing Leader Hose with Check Valve 250psi Safety Valve Drain Petcock Mounting Hardware. Tank Fill Rate: 0 to 200 PSI —–5 Min. 165 to 200 PSI —–1 Min. Check Out our Awesome Feedback. All presumed defective or wrong items must obtain a Return Merchandise Authorization Number before returning. If you decide for whatever reason you would like to return any UNDAMAGED, UNUSED, UNOPENED item back to us. We will accept it. For the Continental U. Our Friends across the U. The item “VIAIR 20007 380C COMPRESSOR 200 PSI 2 Gal. 12v. On Board for Air Tools Horns Bags” is in sale since Thursday, November 20, 2008. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Suspension & Steering\Lower Kits & Parts”. The seller is “aaco85205″ and is located in Mesa, Arizona. This item can be shipped worldwide.
  • Part Brand: Viair
  • Voltage: 12V
  • Interchange Part Number: 380c Kit
  • California Prop 65 Warning: WARNING: This product contains chemicals known to the State of California to cause cancer and/or birth defects or other reproductive harm.
  • Manufacturer Part Number: 20007
  • Included Hardware: Air Compressor
  • Other Part Number: Viair20007 380c Air Compressor
  • Brand: VIAIR Corporation
  • Warranty: Yes

VIAIR 20007 380C COMPRESSOR 200 PSI 2 Gal. 12v. On Board for Air Tools Horns Bags

Weld On Triangulated 4 Link Kit Rear Brackets & 2500 Bags Air Ride Suspension

Weld On Triangulated 4 Link Kit Rear Brackets & 2500 Bags Air Ride Suspension
Weld On Triangulated 4 Link Kit Rear Brackets & 2500 Bags Air Ride Suspension
Weld On Triangulated 4 Link Kit Rear Brackets & 2500 Bags Air Ride Suspension
Weld On Triangulated 4 Link Kit Rear Brackets & 2500 Bags Air Ride Suspension
Weld On Triangulated 4 Link Kit Rear Brackets & 2500 Bags Air Ride Suspension
Weld On Triangulated 4 Link Kit Rear Brackets & 2500 Bags Air Ride Suspension
Weld On Triangulated 4 Link Kit Rear Brackets & 2500 Bags Air Ride Suspension
Weld On Triangulated 4 Link Kit Rear Brackets & 2500 Bags Air Ride Suspension
Weld On Triangulated 4 Link Kit Rear Brackets & 2500 Bags Air Ride Suspension
Weld On Triangulated 4 Link Kit Rear Brackets & 2500 Bags Air Ride Suspension
Weld On Triangulated 4 Link Kit Rear Brackets & 2500 Bags Air Ride Suspension
Weld On Triangulated 4 Link Kit Rear Brackets & 2500 Bags Air Ride Suspension

Weld On Triangulated 4 Link Kit Rear Brackets & 2500 Bags Air Ride Suspension
Universal Rear Weld-On Triangulated 4 Link Suspension Kit. With Two 2500 Air Bags & Rear. Includes: Four – Heavy Duty Steel Bars Four – Zinc Plated Steel Rod Ends W/ Urethane Bushings Two – Steel, Weld-On Triangulated Frame Mounts Two – Steel, Weld-On Lower Axle Tube Mounts Four – Steel, Weld-On Center Link Axle Mounts Two – Steel, Weld-On Side Frame Mounts Eight – Button Head Bolts with Nyloc Nuts Two – Weld-On Over The Axle Bag Mount Two – Weld-On Upper Frame Bag Mount Two – Standard 2500 Single 1/2npt Port Air Bags. Instructions Are Not Included We Recommend Professional Installation. All Four Bars Measure 24.00 (Center To Center Adjusted All The Way In). Specs of bag: 2500 LBS Diameter 6″, Extended 8″, Closed 2.75″ Two Top Mounting Holes Measure Approx 1-3/4″ from Eye to Eye Bottom has One Mounting Hole in Center All mounting holes are 3/8-16 UNC. The right to make changes in design or add to or improve on product without incurring any obligations to install the same on products previously manufactured is expressly reserved. All parts are aftermarket replacement parts. Unless specifically noted, no implication is made that these parts are the original car manufacturers’, are from the original suppliers, or are approved by them. Always utilize safety restrain systems while operating vehicle. Billet Adapters are intended to be used ONLY on a show vehicle, stylized for a special look and NOT intended to be used on long driving, freeway driving and every day driving. Under no circumstances will Phx Wheel Inc. Be liable to any party for any direct, indirect, special, incidental, consequential, or other damages based on any improper use.. It is up to the user and/or installer to determine fitness for any other application. Many of our products require fabrication skills to install and should only be installed by a qualified fabricator or mechanic. Product must be unused and in original boxes and packaging material. Or without a RA# will be refused. No claims will be accepted on parts that have been modified in any way. It is also the responsibility of the person installing any component or kit to determine the suitability of the components or kit for that particular application. Products are intended for off road and show use only. Always check with your local authorities for highway laws in your area because highway laws and the enforcement of those laws vary widely. The item “Weld On Triangulated 4 Link Kit Rear Brackets & 2500 Bags Air Ride Suspension” is in sale since Tuesday, June 2, 2015. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Suspension & Steering\Lower Kits & Parts”. The seller is “wheelsnparts” and is located in Mesa, Arizona. This item can be shipped worldwide.
  • Bundle Listing: Yes
  • Country/Region of Manufacture: United States
  • Interchange Part Number: lowrider drop slam lift lower custom truck car
  • Adjustable: Yes
  • Kit or Single Part: Kit
  • Type: Kit
  • Manufacturer Part Number: K-4LINK-34-BRKT-25-001
  • Placement on Vehicle: Left
  • Other Part Number: air ride bars 4link bag parts bracket universal
  • Brand: wNp
  • Fitment Type: Performance/Custom
  • Warranty: Lifetime

Weld On Triangulated 4 Link Kit Rear Brackets & 2500 Bags Air Ride Suspension